What the he** is this for? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 07-31-2007, 10:33 PM

I ordered some stuff from suicide doors and they sent me a
DIY cup kit FS SP it's about 8" diameter and about 18" tall.
And I was charged $50 for it.

Ram-Man · 07-31-2007, 10:46 PM

Beer Mug?

Mr79C10 · 07-31-2007, 10:51 PM

Ash tray?

camaro__thunder · 07-31-2007, 11:29 PM

That doesn't sound like them.. Call them and tell them what happened.

randyjohn · 08-01-2007, 12:27 AM

definitely trash can for the bathroom.

entourageguy · 08-01-2007, 08:08 AM

Ricer single tail pipe extension kit...

Brian ..

Tony@AirRideTech · 08-01-2007, 12:22 PM

Quote:

Originally Posted by entourageguy

Ricer single tail pipe extension kit...

Brian ..

Kontrol Phreaks · 08-01-2007, 12:34 PM

That's suicide doors products for ya. Maybe it's the left over sewer pipe from their shaved toilet seat kit. Or better yet an anti-tool theft device that is desinged to keep people from borrowing your tools.

Man 50 bucks for oversized tubing by itself is crazy. If you were to order a DIY kit from us, and you wanted 18" of tubing ( which is WAY to much for 67-72 trucks ) in 4.5 dia or 5.5 dia tubing, along with (4) mounting plates, it would only be $46.19. If you're trying to build your own set of front cups then 10 inches of tube would be fine. So figure 10 inches of tube, and the (4) plates your still only $39.71 for all the parts.

Knowledge and Experience is Priceless ........

BACKYARD88 · 08-01-2007, 12:43 PM

I'm using 8" pipe to make my lower bag pockets. I paid 38.00 or so from the welding supply for a foot with jagged cuts and it's kinda rusty. 50.00 doesn't seem bad to me if you have something to use it for.

Kontrol Phreaks · 08-01-2007, 12:54 PM

Quote:

Originally Posted by BACKYARD88

50.00 doesn't seem bad to me if you have something to use it for.

IF you have something to use it for was correct.

chevydog66 · 08-01-2007, 02:59 PM

Yep, I think I will now have to go purchase a $1000 band saw just to cut my $50 piece of steel.

67Fleet · 08-01-2007, 09:05 PM

I don't think $50 is that bad if it is indeed 8" diameter pipe. The price of steel has gone up quite a bit this year. I'd definitely call SD and tell them your situation, they'll probably credit you and I doubt they'd want it back as it would be cost prohibitive to ship it again.

Clint, are you ever going to answer my PM on a watts link? I haven't gotten a response from KP either. This isn't like you guys. What's up?

Kontrol Phreaks · 08-02-2007, 12:02 PM

Bret

I haven't recieved any PM's about a Watts from you. If you want to send me on I will be more then glad to answer whatever questions you might have.

Thanks

jasonb72 · 08-02-2007, 04:58 PM

Quote:

Originally Posted by Kontrol Phreaks

Bret

I haven't recieved any PM's about a Watts from you. If you want to send me on I will be more then glad to answer whatever questions you might have.

Thanks

Clint, PM'd you

kid66 · 08-02-2007, 01:02 PM

$1000 band saw, $50 for a 8" diameter pipe, Calling SD telling them they messed up priceless!! I have order a few parts from them before and had to re weld a few of the parts because they did not finishing welding them. They have some great deals but need some help in the customer service.

b&a72 · 08-02-2007, 01:13 PM

Quote:

Originally Posted by kid66

$1000 band saw, $50 for a 8" diameter pipe, Calling SD telling them they messed up priceless!! I have order a few parts from them before and had to re weld a few of the parts because they did not finishing welding them. They have some great deals but need some help in the customer service.

I agree I had some parts shipped and it took them over a week to ship them and when I called and e-mailed them no answer.

edflores · 08-02-2007, 01:42 PM

Quote:

Originally Posted by kid66

$1000 band saw, $50 for a 8" diameter pipe, Calling SD telling them they messed up priceless!! I have order a few parts from them before and had to re weld a few of the parts because they did not finishing welding them. They have some great deals but need some help in the customer service.

i have seen nothing but quility from them. did you call them up?? they are very busy but i always get a response on the phone. email usually takes a day or 2. i unno.

BACKYARD88 · 08-02-2007, 01:58 PM

Quote:

Originally Posted by edflores

i have seen nothing but quility from them. did you call them up?? they are very busy but i always get a response on the phone. email usually takes a day or 2. i unno.

I agree. It's almost impossible to get them through email(it's hard to get anyone through email) but if you call there usually isn't a problem. I made several orders from them and have been very pleased with the quality of products and service.

kid66 · 08-02-2007, 03:38 PM

Quote:

Originally Posted by edflores

i have seen nothing but quility from them. did you call them up?? they are very busy but i always get a response on the phone. email usually takes a day or 2. i unno.

I have called them a number of times. I am busy also and don't have time to fight with someone over parts I paid for and were not right when I paid for them in full. They should learn to give people what they paid for in full and nothing else. That's fair right?? Tell me if I am wrong. Like I said before I like the parts they make but customers pay their bills and if you don't have customer service you won't make any money in the long run. We as truck builders need to put our foot down when stuff like this happens. I know my money does not make or break the company, but I know my money helps pays someone weeks pay.

67Fleet · 08-02-2007, 01:37 PM

Thanks Clint, got your email. I will be placing the order very shortly!!

timcos · 08-02-2007, 04:50 PM

subwoofer enclosure

Kontrol Phreaks · 08-03-2007, 12:27 PM

Quote:

Originally Posted by timcos

subwoofer enclosure

Extra Strength Bazooka Tube or what ?

tom coop · 08-03-2007, 12:22 PM

its a build your own lower cup kit

chevydog66 · 08-03-2007, 03:03 PM

Yep, I called them. It's a do it yourself rear cup kit. Now I just have to measure and cut it????????????????

07-31-2007, 10:33 PM	#1
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	What the he is this for?** I ordered some stuff from suicide doors and they sent me a DIY cup kit FS SP it's about 8" diameter and about 18" tall. And I was charged $50 for it. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up Last edited by chevydog66; 07-31-2007 at 10:34 PM.

07-31-2007, 10:46 PM	#2
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: What the he is this for?** Beer Mug? __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

07-31-2007, 10:51 PM	#3
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: What the he is this for?** Ash tray? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

07-31-2007, 11:29 PM	#4
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: What the he is this for?** That doesn't sound like them.. Call them and tell them what happened. __________________ My Project 69 SWB SHAVED BAGGED DOORED

08-01-2007, 12:27 AM	#5
randyjohn Registered User Join Date: Jun 2007 Location: grand forks, nd Posts: 154	Re: What the he is this for?** definitely trash can for the bathroom. __________________ It's peanut butter jelly time. '74 GMC 3/4 TON 2WD LB

08-01-2007, 08:08 AM	#6
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: What the he is this for? Ricer single tail pipe extension kit... Brian .. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW 59 Chev Apache PRAISE THE LOWERED 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited**

08-01-2007, 12:34 PM	#8
Kontrol Phreaks Registered User Join Date: Feb 2006 Location: Central Cali Posts: 242	Re: What the he is this for?** That's suicide doors products for ya. Maybe it's the left over sewer pipe from their shaved toilet seat kit. Or better yet an anti-tool theft device that is desinged to keep people from borrowing your tools. Man 50 bucks for oversized tubing by itself is crazy. If you were to order a DIY kit from us, and you wanted 18" of tubing ( which is WAY to much for 67-72 trucks ) in 4.5 dia or 5.5 dia tubing, along with (4) mounting plates, it would only be $46.19. If you're trying to build your own set of front cups then 10 inches of tube would be fine. So figure 10 inches of tube, and the (4) plates your still only $39.71 for all the parts. Knowledge and Experience is Priceless ........ __________________ - Clint -

08-01-2007, 12:43 PM	#9
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: What the he is this for? I'm using 8" pipe to make my lower bag pockets. I paid 38.00 or so from the welding supply for a foot with jagged cuts and it's kinda rusty. 50.00 doesn't seem bad to me if you have something to use it for. __________________ -Mike Owen- Support the board here!** 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-01-2007, 02:59 PM	#11
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What the he is this for?** Yep, I think I will now have to go purchase a $1000 band saw just to cut my $50 piece of steel. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-01-2007, 09:05 PM	#12
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: What the he is this for?** I don't think $50 is that bad if it is indeed 8" diameter pipe. The price of steel has gone up quite a bit this year. I'd definitely call SD and tell them your situation, they'll probably credit you and I doubt they'd want it back as it would be cost prohibitive to ship it again. Clint, are you ever going to answer my PM on a watts link? I haven't gotten a response from KP either. This isn't like you guys. What's up? __________________ -Bret 67 short-fleet sold!

08-02-2007, 12:02 PM	#13
Kontrol Phreaks Registered User Join Date: Feb 2006 Location: Central Cali Posts: 242	Re: What the he is this for?** Bret I haven't recieved any PM's about a Watts from you. If you want to send me on I will be more then glad to answer whatever questions you might have. Thanks __________________ - Clint -

08-02-2007, 01:02 PM	#15
kid66 Registered User Join Date: May 2007 Location: Orlando, FL Posts: 25	Re: What the he is this for?** $1000 band saw, $50 for a 8" diameter pipe, Calling SD telling them they messed up priceless!! I have order a few parts from them before and had to re weld a few of the parts because they did not finishing welding them. They have some great deals but need some help in the customer service.

08-02-2007, 01:37 PM	#20
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: What the he is this for?** Thanks Clint, got your email. I will be placing the order very shortly!! __________________ -Bret 67 short-fleet sold!

08-02-2007, 04:50 PM	#21
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: What the he is this for? subwoofer enclosure __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks** 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

08-03-2007, 12:22 PM	#23
tom coop Registered User Join Date: Nov 2006 Location: memphis Posts: 98	Re: What the he is this for?** its a build your own lower cup kit



Register or Log In To remove these advertisements.

08-03-2007, 03:03 PM	#24
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What the he is this for?** Yep, I called them. It's a do it yourself rear cup kit. Now I just have to measure and cut it???????????????? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

Register or Log In To remove these advertisements.