Gauges & Metal Door Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 08-01-2007, 06:51 PM

Found these in my garage. 80 lb. oil pressure and amp/temp. Getting these as is. Can't remember if they work or not. I would think the oil works as it is mechanical.

Also have blue metal door panels in decent shape. Bought these off another board member, but not going to use them. Has surface rust on the back side, but no rust throughs. $25.00 and no shipping. Can bring to Carlisle this Friday.

$25.00 shipped in lower 48 states. Paypal preferred or Postal MO.
Reply to this thread only.....

I'm also looking for a good locking left door latch assembly. Must be able to lock with door closed using the key. Can trade for the gauges.

I will be going to Carlisle Truck Nats. on Friday. Could bring door panels & gauges with me.

**SactoJim** · 08-01-2007, 06:57 PM

What did they put the 80 lb oil gauges in?

Most are 60 lb.....correct?

How much for that gauge?

70GMCer · 08-01-2007, 07:26 PM

Most are 60 lb. I think the 80 lb ones came in 1 ton trucks. Someone else might chime in on this. I'm selling the gauges as a lot for $25.00 shipped in lower 48 states....

RicksTrucks · 08-01-2007, 10:19 PM

I will take the guages. The guy I bought my rebuild 305 from put a high performance oil pump in it so it pegs my 60 lb guage.

70GMCer · 08-02-2007, 04:21 PM

PM sent

Sinister · 08-02-2007, 05:13 PM

Would those door panels fit in a '69?

70GMCer · 08-02-2007, 07:24 PM

yes

**jerry moss** · 08-03-2007, 10:20 AM

80 Lb. Guages Were In Big Block Trucks

Longhorn Man · 08-06-2007, 05:27 PM

Quote:

Originally Posted by jerry moss

80 Lb. Guages Were In Big Block Trucks

I've never heard this... I've only heard that they went in C/40 and bigger.

wibilly · 08-06-2007, 11:30 PM

Quote:

Originally Posted by jerry moss

80 Lb. Guages Were In Big Block Trucks

i have two big block trucks here and i don't think either one has a 80 psi gauge in it, i'm with andy on this one as usual

70GMCer · 08-03-2007, 02:57 PM

thanks, jerry

Sinister · 08-03-2007, 05:10 PM

I'll take those door panels off your hands, PM me your Paypal info.
You'll be shipping to 91604

Sinister · 08-03-2007, 09:29 PM

Quote:

Originally Posted by Sinister

I'll take those door panels off your hands, PM me your Paypal info.
You'll be shipping to 91604

That post sounded a little abrupt, my apologies.
I'd still like to get those door panels if they're still available.
Thanks...

70GMCer · 08-04-2007, 07:03 AM

Sinister.....I said in the original post, that I wasn't shipping these. I don't have a box that these will fit into. Give me a few days to see if I can locate one. I'll get a weight and give you the shipping charges. Thanks.....

steve

Sinister · 08-04-2007, 09:52 AM

Quote:

Originally Posted by 70GMCer

Found these in my garage. 80 lb. oil pressure and amp/temp. Getting these as is. Can't remember if they work or not. I would think the oil works as it is mechanical.

Also have blue metal door panels in decent shape. Bought these off another board member, but not going to use them. Has surface rust on the back side, but no rust throughs. $25.00 and no shipping. Can bring to Carlisle this Friday.

$25.00 shipped in lower 48 states. Paypal preferred or Postal MO.
Reply to this thread only.....

I'm also looking for a good locking left door latch assembly. Must be able to lock with door closed using the key. Can trade for the gauges.

I will be going to Carlisle Truck Nats. on Friday. Could bring door panels & gauges with me.

I didn't realize you weren't shipping them, the original post was a little unclear. Don't worry about it, I found some other ones...

RicksTrucks · 08-06-2007, 04:33 PM

Gauges arrived today, thanks.

08-01-2007, 06:51 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Gauges & Metal Door Panels Found these in my garage. 80 lb. oil pressure and amp/temp. Getting these as is. Can't remember if they work or not. I would think the oil works as it is mechanical. Also have blue metal door panels in decent shape. Bought these off another board member, but not going to use them. Has surface rust on the back side, but no rust throughs. $25.00 and no shipping. Can bring to Carlisle this Friday. $25.00 shipped in lower 48 states. Paypal preferred or Postal MO. Reply to this thread only..... I'm also looking for a good locking left door latch assembly. Must be able to lock with door closed using the key. Can trade for the gauges. I will be going to Carlisle Truck Nats. on Friday. Could bring door panels & gauges with me. Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 08-01-2007 at 06:54 PM.

08-01-2007, 06:57 PM	#2
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Gauges & Metal Door Panels What did they put the 80 lb oil gauges in? Most are 60 lb.....correct? How much for that gauge? __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

08-01-2007, 07:26 PM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Gauges & Metal Door Panels Most are 60 lb. I think the 80 lb ones came in 1 ton trucks. Someone else might chime in on this. I'm selling the gauges as a lot for $25.00 shipped in lower 48 states.... __________________ 1997 GMC Sierra Ext 1965 Mustang

08-01-2007, 10:19 PM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: Gauges & Metal Door Panels I will take the guages. The guy I bought my rebuild 305 from put a high performance oil pump in it so it pegs my 60 lb guage. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-02-2007, 04:21 PM	#5
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Gauges & Metal Door Panels PM sent __________________ 1997 GMC Sierra Ext 1965 Mustang

08-02-2007, 05:13 PM	#6
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Gauges & Metal Door Panels Would those door panels fit in a '69? __________________ Beat it to fit, Paint it to match...

08-02-2007, 07:24 PM	#7
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Gauges & Metal Door Panels yes __________________ 1997 GMC Sierra Ext 1965 Mustang

08-03-2007, 10:20 AM	#8
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: Gauges & Metal Door Panels 80 Lb. Guages Were In Big Block Trucks __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-03-2007, 02:57 PM	#11
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Gauges & Metal Door Panels thanks, jerry __________________ 1997 GMC Sierra Ext 1965 Mustang

08-03-2007, 05:10 PM	#12
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Gauges & Metal Door Panels I'll take those door panels off your hands, PM me your Paypal info. You'll be shipping to 91604 __________________ Beat it to fit, Paint it to match...

08-04-2007, 07:03 AM	#14
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Gauges & Metal Door Panels Sinister.....I said in the original post, that I wasn't shipping these. I don't have a box that these will fit into. Give me a few days to see if I can locate one. I'll get a weight and give you the shipping charges. Thanks..... steve __________________ 1997 GMC Sierra Ext 1965 Mustang

08-06-2007, 04:33 PM	#16
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: Gauges & Metal Door Panels Gauges arrived today, thanks. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.