![]() |
|
![]() |
#1 |
70+ ( Old Skool Club )
![]() Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,119
|
Did They Ever ?
I met a guy in a parking lot with a 72 Gmc Sierra Grande with factory air ( very rare to have a/c around here) and of course I had to chat with him about our trucks. He mentioned in the converstion that he knew a guy in BC that had a 72 Cheyenne ( which be bought from the USA) with the factory clock option. I asked where it was on the gauge pod and he said it was where the vacumn gauge went. I have never heard of a factory clock in our trucks. Does anyone know if one was available from the factory?
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021 |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Did They Ever ?
i've seen a few dealer installed clocks that looked like little pedistile mount tachs installed on top the dash over the years in vans and trucksfrom the late 60's early 70's i think there was a clock from an impala that mounted in the console that some guys had installed in the dash// but never heard of a factory option in dash clock
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
Spanked once
![]() Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
|
Re: Did They Ever ?
The dash on my 71 does not have a clock but... next to the column on the right , the original plastic lens does have about an 1/8 inch hole in it from what I remember from then was the clock adj. stem. The back plate has no provision for a vac guage or clock which tells me someone while putting the cluster together put the wrong lens in it.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: May 2005
Location: New Brunswick, Canada
Posts: 587
|
Re: Did They Ever ?
Jeez, my brother is picking up a 68 CST in a couple of weeks, and in the 7 guage cluster, right where the vacuum guage goes there is a clock with the little adjuster sticking out of the lense!
I told him I've never seen this before 1973, and I've been around these trucks my whole life. Maybe it was a "rare" option? Last edited by Shock_Me; 08-17-2007 at 09:41 PM. |
![]() |
![]() |
![]() |
#5 |
Insert Title Here
Join Date: Feb 2006
Location: Dyer, Indiana
Posts: 5,679
|
Re: Did They Ever ?
in the 40 years these trucks have been out im sure alot of people put clocks in em.... in 40 years from now, people are going to talking about the C10's with the rare airbag suspension they found at the junk yard
__________________
BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 08-17-2007 at 09:43 PM. |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: May 2005
Location: New Brunswick, Canada
Posts: 587
|
Re: Did They Ever ?
You're prolly right 1LoC10.
The clock does look identical to the later "square body" GM truck clocks. I just thought it was pretty cool coincedence that the one Already Gone spoke about was also located in the vacuum guage hole. But when you think about it, that's usually the hole without a guage at all, and an obvious choice to mount a clock. It's the vacuum guage that is the true "rare option" Cheers Pete |
![]() |
![]() |
![]() |
#7 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
Re: Did They Ever ?
I found a website a couple of years ago, something like "clockdoc". On his homepage he had one of our clusters with a clock in the vac spot. He wasn't claiming OE, just "looks like OE". And it did look good.
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: May 2005
Location: New Brunswick, Canada
Posts: 587
|
Re: Did They Ever ?
Al's right. It looks OE. As soon as my bro gets his 68, I'll post up a pic. I may even sneek a peek behind the cluster to see how it was mounted. Might as well add it to my list of mods to my own truck...
Pete |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Did They Ever ?
acording to the factory books, there was NEVER anything installed in that blank hole in 10 - 30 series trucks.
No vac, no clock, no canooter valve guage... no flux capaciter... nothing. |
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: May 2004
Location: Topeka, Ks
Posts: 2,293
|
Re: Did They Ever ?
Quote:
![]() I'm with him, ITS NOT A FACTORY OPTION! ![]()
__________________
I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. |
|
![]() |
![]() |
![]() |
#11 |
Born Psycho
![]() Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,884
|
Re: Did They Ever ?
around here there are a few trucks with "factory" clocks. an older gentleman i know used to do them for the dealerships when the the trucks were new. since people purchased the trucks from the dealer with the clock installed, i'm sure they assumed the clock was "factory" installed. if i remember correctly, he used corvette clocks.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
![]() |
![]() |
![]() |
#12 |
sufficiently talented fool
![]() Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: Did They Ever ?
Do you mean to tell me that my canooter valve gauge is not factory?
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" ![]() 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
![]() |
![]() |
![]() |
#13 |
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,877
|
Re: Did They Ever ?
I had a gauge panel built for me by board member 70c10. He put a clock in it for me. I think its a nice addition...Course if anyone asks Im going to tell em its an ultra rare factory option
![]() Last edited by CG; 08-18-2007 at 02:27 AM. |
![]() |
![]() |
![]() |
#14 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Did They Ever ?
that's right cets... the canootervalve guage isn't stock.
They used dummy lights. ![]() |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: May 2005
Location: New Brunswick, Canada
Posts: 587
|
Re: Did They Ever ?
Sorry, maybe I should have put some quotation marks around "looks OE". I know it wasn't factory installed. But it looks damn good stuck in that hole.
CG yours looks great by the way. Pete Last edited by Shock_Me; 08-18-2007 at 09:03 AM. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: May 2004
Location: Topeka, Ks
Posts: 2,293
|
Re: Did They Ever ?
I never did understand why they didn't add the clock as a factory option, many other vehicles from that era and earlier had them. I can imagine there were some involved with the design and development that pushed for it but for whatever reason it didn't get added. I'll bet there was a reason but we will probably never know.
Jeff
__________________
I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. |
![]() |
![]() |
![]() |
#17 |
70+ ( Old Skool Club )
![]() Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,119
|
Re: Did They Ever ?
Thanks for all the replies. If I ever get to see a "factory" clock in one of our trucks I'll take a pic and see if it shows on the Data Plate. I'm gonna check this out further and see if I can contact the guy with the supposidly "factory clock" and see if I can get him to email me a pic which I will gladly share with all of you.
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021 Last edited by Already Gone; 08-18-2007 at 02:26 PM. |
![]() |
![]() |
![]() |
#18 |
upgrading to an older model
Join Date: Aug 2007
Location: Sacramento, KY
Posts: 346
|
Re: Did They Ever ?
hey CG you can put that thing on ebay and get at least ...oh...$600 for it, its in way better shape then the one that guy had one there!?!
Last edited by Brock; 08-18-2007 at 05:40 PM. |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() Join Date: Mar 2006
Location: Clarkrange Tennessee
Posts: 1,786
|
Re: Did They Ever ?
Would this one work? Its out of a 68-71 corvette?
![]() Last edited by Ricks1971; 08-18-2007 at 06:27 PM. |
![]() |
![]() |
![]() |
#20 |
Born Psycho
![]() Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,884
|
Re: Did They Ever ?
Ricks71, next time i see him, i'll try and remember to find out for sure which clock he used.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
Re: Did They Ever ?
You know what would probably be better than a clock would be gauge showing run-time hours.The time a motor has been run always seemed like a better gauge for a maintenance schedule than miles driven.
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
![]() |
![]() |
![]() |
#22 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Did They Ever ?
No clocks,period.All my trucks have come with the worthless mock 7th gauge option.What you need to ask the guywith the factory clock to see the option listed.The rarest options would e the ones that were`t available.
I put those under the hood since you don`t need to monitor run time on a minute to minute basis.But,I agree they are the best way to truly monitor maintainence.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#23 | |
Registered User
Join Date: May 2004
Location: Topeka, Ks
Posts: 2,293
|
Re: Did They Ever ?
Quote:
Jeff
__________________
I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. |
|
![]() |
![]() |
![]() |
#24 | |
Insert Title Here
Join Date: Feb 2006
Location: Dyer, Indiana
Posts: 5,679
|
Re: Did They Ever ?
Quote:
![]() http://www.iequus.com/product_info.p...ory_id=100_110
__________________
BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 08-20-2007 at 06:34 PM. |
|
![]() |
![]() |
![]() |
#25 |
Insert Title Here
Join Date: Feb 2006
Location: Dyer, Indiana
Posts: 5,679
|
Re: Did They Ever ?
you really love your pink rides huh
__________________
BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << |
![]() |
![]() |
![]() |
Bookmarks |
|
|