1/4 mile e.t's with caddy 472 or500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1bad chevy · 08-21-2007, 08:59 AM

lookin to see if anyone has gone to the track with there caddy powered truck's stock or modified trying to get an idea of what this thing will run plan on taking it to the track when finished but need to see what to expect i'm thinking 13's to 14's hopefully it's all stock

**special-K** · 08-21-2007, 09:43 AM

I think we`re going to need you to tell us.

mplex2000 · 08-21-2007, 10:36 AM

I would think at least 14s. Lots of torque but no real world horsepower (I would imagine). I'm sure they'd be hot worked over or at least with a little baby 100hp shot of juice.

"**** man, don't listen to me ... I'm just talkin out my ass."

Longhorn Man · 08-21-2007, 03:47 PM

with those gears, you'll run outta revs at 1/2 track

1bad chevy · 08-22-2007, 06:56 AM

i have some gears to change into it if needed thanks guy's

djracer · 08-22-2007, 07:52 AM

What gear and what tire?

**special-K** · 08-22-2007, 08:04 AM

...torque/horsepower specs...

1bad chevy · 09-29-2007, 07:28 AM

I Have A 4.10 Posi With A 31 Inch Tall Tire RIGHT AROUND 400 HORSE 500PLUS TORQUE taking her to the track october 6 lebanon valley dragway in lebanon new york will post my resilts hoping for 15,s atleast

djracer · 09-29-2007, 08:57 AM

Good luck I wish you were closer! What kind of tires do you have?

08-21-2007, 08:59 AM	#1
1bad chevy Registered User Join Date: Dec 2006 Location: POWNAL VERMONT Posts: 343	1/4 mile e.t's with caddy 472 or500 lookin to see if anyone has gone to the track with there caddy powered truck's stock or modified trying to get an idea of what this thing will run plan on taking it to the track when finished but need to see what to expect i'm thinking 13's to 14's hopefully it's all stock __________________ 1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear

08-21-2007, 09:43 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 1/4 mile e.t's with caddy 472 or500 I think we`re going to need you to tell us. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-21-2007, 10:36 AM	#3
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: 1/4 mile e.t's with caddy 472 or500 I would think at least 14s. Lots of torque but no real world horsepower (I would imagine). I'm sure they'd be hot worked over or at least with a little baby 100hp shot of juice. "**** man, don't listen to me ... I'm just talkin out my ass." Last edited by mplex2000; 08-21-2007 at 10:37 AM.

08-21-2007, 03:47 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: 1/4 mile e.t's with caddy 472 or500 with those gears, you'll run outta revs at 1/2 track

08-22-2007, 06:56 AM	#5
1bad chevy Registered User Join Date: Dec 2006 Location: POWNAL VERMONT Posts: 343	Re: 1/4 mile e.t's with caddy 472 or500 i have some gears to change into it if needed thanks guy's __________________ 1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear

08-22-2007, 07:52 AM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: 1/4 mile e.t's with caddy 472 or500 What gear and what tire? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-22-2007, 08:04 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 1/4 mile e.t's with caddy 472 or500 ...torque/horsepower specs... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-29-2007, 07:28 AM	#8
1bad chevy Registered User Join Date: Dec 2006 Location: POWNAL VERMONT Posts: 343	Re: 1/4 mile e.t's with caddy 472 or500 I Have A 4.10 Posi With A 31 Inch Tall Tire RIGHT AROUND 400 HORSE 500PLUS TORQUE taking her to the track october 6 lebanon valley dragway in lebanon new york will post my resilts hoping for 15,s atleast __________________ 1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear Last edited by 1bad chevy; 09-29-2007 at 07:31 AM.

09-29-2007, 08:57 AM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: 1/4 mile e.t's with caddy 472 or500 Good luck I wish you were closer! What kind of tires do you have? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.