cool '68 fleetside model - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brock · 08-29-2007, 09:22 PM

If this thing was a step side I'd be all over it...thought some of you fleet-siders might find this interesting

http://cgi.ebay.com/1968-Chevy-Picku...QQcmdZViewItem

**special-K** · 08-30-2007, 06:33 AM

What bugs me is to build a wrecker,it`s a 1/2t with hubcaps.Keep a look out,MPC made one but it`s an 8-footer.Easy to shorten.I don`t build the vintage ones,personally.Look for the AMT`72 GMC short step and swap grilles.They were a re-make not so long ago.

67ChevyRedneck · 08-30-2007, 08:46 AM

Every time I try to bid on one of those, they always get to $50-75

Same thing with the yellow blazer model kit, I think it's called the "boondocker." Cool thing now is that AMT made a new blazer, but no 67-68 truck yet

You can buy a resin one, but they're $$$ too.

I have found a 69 resin grill on ebay, so you can use the 72 kit and have a 69

**special-K** · 08-30-2007, 09:21 PM

I`ve seen these truck models go for over $100.

Brock · 08-30-2007, 09:28 PM

I'd like to find one of a Chevy '69 stepside...do they make such a creature? Or are you saying buy the two models and combine them to make one?

**special-K** · 08-31-2007, 06:34 AM

You`d have to "kit bash",there weren`t any made.You`d have to find the`72 GMC Stepside(AMT)and get that`69 grille Craig was talking about.I would only consider building a re-issue,personally.But,this kit was re-issued in the`90s and won`t be that cheap,either.

67ChevyRedneck · 08-31-2007, 11:03 AM

Quote:

Originally Posted by special-K

You`d have to "kit bash",there weren`t any made.You`d have to find the`72 GMC Stepside(AMT)and get that`69 grille Craig was talking about.I would only consider building a re-issue,personally.But,this kit was re-issued in the`90s and won`t be that cheap,either.

It's Jesse, the quote in my sig is from craig morgan

Andy4639 · 08-31-2007, 07:31 AM

I won this one last week.

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=014

Here is the front grill for the 67.
http://cgi.ebay.com/Resin-grill-and-...QQcmdZViewItem

67ChevyRedneck · 08-31-2007, 11:08 AM

Quote:

Originally Posted by Andy4639

I won this one last week.

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=014

Here is the front grill for the 67.
http://cgi.ebay.com/Resin-grill-and-...QQcmdZViewItem

I have that blazer!

Never seen the grill conversion before.

There IS a company that makes shorbed boxes, stepside boxes, and 67-68 cabs/clips. They're all resin. I can't remember if the cab had a small window or not. But they are all resin kits and were posted on the board about a year ago. If I remember correctly, they all go for $50+

They have 72 resin burbs on ebay frequently, I've been thinking about getting one, but I've yet to see an auction that includes the glass for it???

Andy4639 · 08-31-2007, 04:57 PM

Checkout the link in General for Diecast. I found the sub resin body with the plastic windows for like $55.00

http://67-72chevytrucks.com/vboard/s...=254260&page=2

**special-K** · 09-01-2007, 06:29 AM

I bid on this,but got sniped,as usual.I`m glad,I put an automatic bid on it without seeing that it wasn`t even complete.I was going to stay with it,though.It`s a great box in condition and artwork,but not worth $50 to me incomplete.I was just going to add it to my display.My 1st bid,I really don`t care for Ebay.

08-29-2007, 09:22 PM	#1
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	cool '68 fleetside model If this thing was a step side I'd be all over it...thought some of you fleet-siders might find this interesting http://cgi.ebay.com/1968-Chevy-Picku...QQcmdZViewItem __________________ 68 stepside, short-box, multi-colored (for now)

08-30-2007, 06:33 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: cool '68 fleetside model What bugs me is to build a wrecker,it`s a 1/2t with hubcaps.Keep a look out,MPC made one but it`s an 8-footer.Easy to shorten.I don`t build the vintage ones,personally.Look for the AMT`72 GMC short step and swap grilles.They were a re-make not so long ago. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-30-2007 at 06:48 AM.

08-30-2007, 08:46 AM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: cool '68 fleetside model Every time I try to bid on one of those, they always get to $50-75 Same thing with the yellow blazer model kit, I think it's called the "boondocker." Cool thing now is that AMT made a new blazer, but no 67-68 truck yet You can buy a resin one, but they're $$$ too. I have found a 69 resin grill on ebay, so you can use the 72 kit and have a 69 __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 08-30-2007 at 08:47 AM.

08-30-2007, 09:21 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: cool '68 fleetside model I`ve seen these truck models go for over $100. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-30-2007, 09:28 PM	#5
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Re: cool '68 fleetside model I'd like to find one of a Chevy '69 stepside...do they make such a creature? Or are you saying buy the two models and combine them to make one? __________________ 68 stepside, short-box, multi-colored (for now)

08-31-2007, 06:34 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: cool '68 fleetside model You`d have to "kit bash",there weren`t any made.You`d have to find the`72 GMC Stepside(AMT)and get that`69 grille Craig was talking about.I would only consider building a re-issue,personally.But,this kit was re-issued in the`90s and won`t be that cheap,either. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-31-2007, 07:31 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: cool '68 fleetside model I won this one last week. http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=014 Here is the front grill for the 67. http://cgi.ebay.com/Resin-grill-and-...QQcmdZViewItem __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 08-31-2007 at 10:23 AM.

08-31-2007, 04:57 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: cool '68 fleetside model Checkout the link in General for Diecast. I found the sub resin body with the plastic windows for like $55.00 http://67-72chevytrucks.com/vboard/s...=254260&page=2 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-01-2007, 06:29 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: cool '68 fleetside model I bid on this,but got sniped,as usual.I`m glad,I put an automatic bid on it without seeing that it wasn`t even complete.I was going to stay with it,though.It`s a great box in condition and artwork,but not worth $50 to me incomplete.I was just going to add it to my display.My 1st bid,I really don`t care for Ebay. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.