Project '66... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Patina66 · 09-12-2007, 07:07 PM

Hey guys I'm pretty new on here - been browsing for a while. I picked up this '66 short stepside on ebay a couple months back and it arrived into the UK a couple weeks ago. I have always been a VW guy and own my own shop doing VW suspension modification, but have always admired these 60's trucks. I always wanted a short fleetside, but when I saw this with the original paint and the tire mount I fell for it. I have a real thing for faded original paint and lowered suspension.

Plans are to buff out the paint, do the metalwork, then blend with a color match and swap the badly dented rear fender for the better one that came with it. Then drop spindles and disc brakes, maybe some 2" blocks for the rear and a c notch. I guess I got lucky, as the suspension is already lowered on coils, but I don't know how much. It has an adjustable rear track bar and shock relocator kit installed. I plan to do some logos for my shop on the doors when it is done and use it to tow VW buses from Europe and the docks on a trailer. I also need to find a nice stepside rear bumper, as I can only find suppliers for chrome ones. Maybe I'll turn up a good used one..? These are the pics of the day I collected it from the shipper.

The bed had been repainted at some point in a similar color to the original, fortunately this sands off easily with wet 400 or 600 wet and dry. Here I have exposed the original paint underneath

I have been removing the flames and door logos, but they must have used house paint or something, it won't come off unless you sand it and takes the original paint off underneath. I painted the Chevrolet on the grille in black as original and have been wet sanding with 2000 grit and buffing the paint. It is turning out awesome. All this is until I can let my wallet recover and order some parts and panels. It needs 1 outer rocker, both front fender rear sections, 1 outrigger/floor support and some door repairs. Apart from this it is rust free.
I plan to powder coat the stock rims black and fit thin band whitewall radial tires. Anyone know a supplier for these?

Stepside65 · 09-12-2007, 07:12 PM

Looks like a good start. Good luck.

**slepysal** · 09-12-2007, 07:36 PM

Cheers from this side of the pond ! The tyres should be fairly easy to find. Keep us posted

L0WRIDE · 09-13-2007, 03:24 AM

looks like you got a good find good luck

63 & 64 Bowties · 09-13-2007, 03:40 AM

not sure if they'd have what you're looking for, but have you tried Coker Tire? www.coker.com

BIG CTY · 09-13-2007, 08:33 AM

Looks like a great truck, and you have all your plans laid out! Welcome and good luck with it!

hewlett2002000 · 09-13-2007, 03:24 PM

nice truck, looks like a good place to start from... good luck
John

gulfcoast66 · 09-12-2007, 07:44 PM

Good original find, good luck on your project.

09-12-2007, 07:07 PM	#1
Patina66 Registered User Join Date: Sep 2007 Location: Southsea, Hampshire, UK Posts: 5	Project '66... Hey guys I'm pretty new on here - been browsing for a while. I picked up this '66 short stepside on ebay a couple months back and it arrived into the UK a couple weeks ago. I have always been a VW guy and own my own shop doing VW suspension modification, but have always admired these 60's trucks. I always wanted a short fleetside, but when I saw this with the original paint and the tire mount I fell for it. I have a real thing for faded original paint and lowered suspension. Plans are to buff out the paint, do the metalwork, then blend with a color match and swap the badly dented rear fender for the better one that came with it. Then drop spindles and disc brakes, maybe some 2" blocks for the rear and a c notch. I guess I got lucky, as the suspension is already lowered on coils, but I don't know how much. It has an adjustable rear track bar and shock relocator kit installed. I plan to do some logos for my shop on the doors when it is done and use it to tow VW buses from Europe and the docks on a trailer. I also need to find a nice stepside rear bumper, as I can only find suppliers for chrome ones. Maybe I'll turn up a good used one..? These are the pics of the day I collected it from the shipper. The bed had been repainted at some point in a similar color to the original, fortunately this sands off easily with wet 400 or 600 wet and dry. Here I have exposed the original paint underneath I have been removing the flames and door logos, but they must have used house paint or something, it won't come off unless you sand it and takes the original paint off underneath. I painted the Chevrolet on the grille in black as original and have been wet sanding with 2000 grit and buffing the paint. It is turning out awesome. All this is until I can let my wallet recover and order some parts and panels. It needs 1 outer rocker, both front fender rear sections, 1 outrigger/floor support and some door repairs. Apart from this it is rust free. I plan to powder coat the stock rims black and fit thin band whitewall radial tires. Anyone know a supplier for these?

09-12-2007, 07:12 PM	#2
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: Project '66... Looks like a good start. Good luck. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

09-12-2007, 07:36 PM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Project '66... Cheers from this side of the pond ! The tyres should be fairly easy to find. Keep us posted __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-13-2007, 03:24 AM	#4
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Project '66... looks like you got a good find good luck __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

09-13-2007, 03:40 AM	#5
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project '66... not sure if they'd have what you're looking for, but have you tried Coker Tire? www.coker.com __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

09-13-2007, 08:33 AM	#6
BIG CTY Between the earth and the sky Join Date: Oct 2006 Location: Chesapeake, VA Posts: 822	Re: Project '66... Looks like a great truck, and you have all your plans laid out! Welcome and good luck with it! __________________ Chris - 1966 C10 Shortbed Fleetside, 1991 GMC Sierra 1500 Extended Cab, 1993 Blazer Sport 4x4 My other rides: 1969 Chevrolet Impala SS427 Convertible 1976 Dodge Tradesman B200 2002 Nissan Maxima 6 speed 2004 Mercedes Benz CL500

09-13-2007, 03:24 PM	#7
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: Project '66... nice truck, looks like a good place to start from... good luck John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

09-12-2007, 07:44 PM	#8
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Project '66... Good original find, good luck on your project. __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.