Remember the saying "Bull in a China Closet"? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71tahoe · 09-18-2007, 10:28 AM

Well I got a little physical while repairing a distributor. Trying to pull off the advance plate to install and advance recurve kit and it siezed. I thought, well I'll just pry harder since it's almost off and SNAP! It's off now but so are the tops of the pins where the e-clip retainer holds on the plate.

Is this what's needed to repair my now completely useless HEI dizzy?

http://www.partsamerica.com/ProductD...e=1312&PTSet=A
Ignition Distributor Advance Weight Pin
Name: xd1-1.jpg
Views: 318
Size: 8.7 KB

71tahoe · 09-19-2007, 09:53 AM

I found out that this is not the part I need. I need one with another groove for an e-clip.

Does anyone have a source for this?

09-18-2007, 10:28 AM	#1
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Remember the saying "Bull in a China Closet"? Well I got a little physical while repairing a distributor. Trying to pull off the advance plate to install and advance recurve kit and it siezed. I thought, well I'll just pry harder since it's almost off and SNAP! It's off now but so are the tops of the pins where the e-clip retainer holds on the plate. Is this what's needed to repair my now completely useless HEI dizzy? http://www.partsamerica.com/ProductD...e=1312&PTSet=A Ignition Distributor Advance Weight Pin

09-19-2007, 09:53 AM	#2
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: Remember the saying "Bull in a China Closet"? I found out that this is not the part I need. I need one with another groove for an e-clip. Does anyone have a source for this?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.