72 Rot Removale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Angelse68cal · 09-19-2007, 12:10 AM

Well I thought I would share some pics of the Rot I removed from my 72 Blazer it only had a little in the Rockers and the Fender area where they all get it. I am no Kevin but I tired to do the best I could!

tdkosta · 09-19-2007, 12:17 AM

Good to see someone undertaking the same project I have on hold right now. Keep the pictures coming.

Angelse68cal · 09-19-2007, 12:20 AM

Here goes some more!

Angelse68cal · 09-19-2007, 12:37 AM

And here is a few more

Angelse68cal · 09-19-2007, 12:40 AM

The last one for now I will have more through out the week.

DURRTY · 09-19-2007, 03:35 AM

thats looking good.

Were did you get those inner rocker pieces and what are they called? I am about to get into the same repair and though I had the sheet metal I needed. I looked here http://www.lmctruck.com/icatalog/cb/0035.asp

and that does not show your piece is it for a pick up? (lmc is easy to browse through fast)

thanks

**jaros44sr** · 09-19-2007, 06:12 AM

Nice work, coming along very well. Luckily you didn't have to get into the 'B' post area. More pics as progress continues.... J.

Hey, what's up with '62 chevy. Had that in HS

**Yukon Jack** · 09-19-2007, 09:54 AM

Nice repairs - I always enjoy seeing the rust repair pics!

Angelse68cal · 09-19-2007, 12:39 PM

DURRTY I got my parts from Brothers trucks but if you have the whole thing Rotted then I would go With GMC pauls Full Rocker inter section it comes with part of the floor pan. its Like 59 a side I think. I usually go to Brothers when I need the Parts Fast since its Local here to me In CAL. Also GMC paul is a member here on the Board.

Angelse68cal · 09-19-2007, 12:40 PM

Thanks for the Complements Guys I just wish I had 1/4 of the talent that Rockln Kevin Has. That Guy is awesome at this stuff.

badpeanut · 09-20-2007, 12:37 AM

Nice work!

Angelse68cal · 10-05-2007, 01:09 PM

Well Its been a while since I posted some pics on here of where I am at....unfortunately I got a piece of metal that shot through my shield and hit my eye so it laid me back a little to heal up.

Long Roof · 10-05-2007, 04:53 PM

Do you have a picture looking straight into the torsion box at the torsion rod? Just wondering what this setup looks like.

**jaros44sr** · 10-05-2007, 05:05 PM

Dude, sorry to here aboot your injury, I've had eye injuries before, JMO but they seem to hurt the worst!!! Wierd how it came thru the shield

Nice progress, looking good. Keep the pics. flowing pls. That 'B' post can be a PITA, glad you didn't have to dig in too deep

FRENCHBLUE72 · 10-06-2007, 11:50 PM

Looks good keep up the good work..

Angelse68cal · 10-17-2007, 09:32 PM

Well I sold My Blazer! A board member bought it. I hope he gets it all done. I think I am going to start on my 62 impala now.

vtblazer · 10-17-2007, 09:48 PM

WHOA!!

Didn't see that comin'.

Chevyman63 · 10-17-2007, 10:20 PM

Quote:

Originally Posted by vtblazer

WHOA!!

Didn't see that comin'.

X2

Burt4x4 · 10-18-2007, 10:24 AM

Quote:

Originally Posted by vtblazer

WHOA!!

Didn't see that comin'.

Or going

Angelse68cal · 10-18-2007, 11:03 PM

All I know is the guys name is Keith and maybe he will chime in on here at some point

BobbyK · 10-17-2007, 10:28 PM

Ya...here I am settleing in for a nice pictorial on rust repair and BAM...game over.

At least it went to another board member.

**Yukon Jack** · 10-18-2007, 09:56 AM

Okay, who's the new mystery owner?!

09-19-2007, 12:10 AM	#1
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	72 Rot Removale Well I thought I would share some pics of the Rot I removed from my 72 Blazer it only had a little in the Rockers and the Fender area where they all get it. I am no Kevin but I tired to do the best I could! Attached Images

09-19-2007, 12:17 AM	#2
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 72 Rot Removale Good to see someone undertaking the same project I have on hold right now. Keep the pictures coming.

09-19-2007, 12:20 AM	#3
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale Here goes some more! Attached Images

09-19-2007, 12:37 AM	#4
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale And here is a few more Attached Images

09-19-2007, 12:40 AM	#5
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale The last one for now I will have more through out the week. Attached Images

09-19-2007, 03:35 AM	#6
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Re: 72 Rot Removale thats looking good. Were did you get those inner rocker pieces and what are they called? I am about to get into the same repair and though I had the sheet metal I needed. I looked here http://www.lmctruck.com/icatalog/cb/0035.asp and that does not show your piece is it for a pick up? (lmc is easy to browse through fast) thanks __________________ Semper Fi Last edited by DURRTY; 10-07-2007 at 03:05 AM.

09-19-2007, 06:12 AM	#7
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,837	Re: 72 Rot Removale Nice work, coming along very well. Luckily you didn't have to get into the 'B' post area. More pics as progress continues.... J. Hey, what's up with '62 chevy. Had that in HS __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 09-19-2007 at 06:40 AM.

09-19-2007, 09:54 AM	#8
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: 72 Rot Removale Nice repairs - I always enjoy seeing the rust repair pics! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-19-2007, 12:39 PM	#9
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale DURRTY I got my parts from Brothers trucks but if you have the whole thing Rotted then I would go With GMC pauls Full Rocker inter section it comes with part of the floor pan. its Like 59 a side I think. I usually go to Brothers when I need the Parts Fast since its Local here to me In CAL. Also GMC paul is a member here on the Board.

09-19-2007, 12:40 PM	#10
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale Thanks for the Complements Guys I just wish I had 1/4 of the talent that Rockln Kevin Has. That Guy is awesome at this stuff.

09-20-2007, 12:37 AM	#11
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,760	Re: 72 Rot Removale Nice work! __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

10-05-2007, 01:09 PM	#12
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale Well Its been a while since I posted some pics on here of where I am at....unfortunately I got a piece of metal that shot through my shield and hit my eye so it laid me back a little to heal up. Attached Images

10-05-2007, 04:53 PM	#13
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: 72 Rot Removale Do you have a picture looking straight into the torsion box at the torsion rod? Just wondering what this setup looks like. __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck Last edited by Long Roof; 10-05-2007 at 04:53 PM.

10-05-2007, 05:05 PM	#14
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,837	Re: 72 Rot Removale Dude, sorry to here aboot your injury, I've had eye injuries before, JMO but they seem to hurt the worst!!! Wierd how it came thru the shield Nice progress, looking good. Keep the pics. flowing pls. That 'B' post can be a PITA, glad you didn't have to dig in too deep __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 10-05-2007 at 05:07 PM.

10-06-2007, 11:50 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 72 Rot Removale Looks good keep up the good work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

10-17-2007, 09:32 PM	#16
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale Well I sold My Blazer! A board member bought it. I hope he gets it all done. I think I am going to start on my 62 impala now. Attached Images

10-17-2007, 09:48 PM	#17
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: 72 Rot Removale WHOA!! Didn't see that comin'.

10-18-2007, 11:03 PM	#20
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: 72 Rot Removale All I know is the guys name is Keith and maybe he will chime in on here at some point

10-17-2007, 10:28 PM	#21
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: 72 Rot Removale Ya...here I am settleing in for a nice pictorial on rust repair and BAM...game over. At least it went to another board member. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

10-18-2007, 09:56 AM	#22
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: 72 Rot Removale Okay, who's the new mystery owner?! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.