Let's see some sbc mighty mouse motors!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob 68327 · 10-01-2007, 11:46 PM

Here's mine!!!!!

**SactoJim** · 10-02-2007, 12:02 AM

OK...I'm in.

Jtrux · 10-02-2007, 01:04 AM

Quote:

Originally Posted by Bob 68327

Here's mine!!!!!

Dang, I think you were just outdone but it's still nice. How about some specs to go with these motors.

**Yukon Jack** · 10-02-2007, 11:08 AM

Here's my might 400 SBC that I had rebuilt recently that is in my 70 K5.

Ole Blue 68 · 10-02-2007, 12:40 PM

That is a bada$$ engine SactoJim!!

That bottom end looks clean enough to eat off of.....

Here's mine installed.

Specs...

010 block bored .60 over, Heads off of an old LT1 (487 casting I think), ceramic coated headers, Edel RPM Intake, Edel 1406 Carb.

mrein3 · 10-02-2007, 12:51 PM

383. I made it out of a 1971 Monte Carlo 350 and a 400 crank a machinist/bud had laying around his shop. Stock heads (rebuilt). Edlebrock carb (1406) and aluminum intake.
Pulls my boat around easy enough. However this thing could really use some upgraded heads.

70short · 10-02-2007, 12:54 PM

Here is mine. I need updated pic's

jugernot · 10-02-2007, 01:15 PM

1968 327 with all kinds of goodies inside

67_C-30 · 10-02-2007, 01:35 PM

Here's mine, but its not in a truck. Its a 540HP 11 : 1 383 with ported 230cc Dart heads, Comp custom roller cam, ported Wieand Team G intake, 830 cfm Holley race carb, and Holley Annihilator ingnition. It runs 11.20's in a 3400# stock suspension 82 Z28 street car. I have run a best of a 11.86 @ 127 in the 1/4 (6.97 @ 102 in the 1/8) with a small NOS 100HP plate system. Click the link to hear it!

http://www.zshare.net/audio/39759456c15893/

Bob 68327 · 10-02-2007, 11:37 PM

Quote:

Originally Posted by Jtrux

Dang, I think you were just outdone but it's still nice. How about some specs to go with these motors.

All I can say is injection is nice ,but i'd rather be Blown!!!! I started this to see motors that were bigger and badder than mine !! Now I have blower envy!!!!!

CHRIS67GMC · 10-02-2007, 09:04 PM

Not sure how to upload pics yet here is a link to my 434 small block. Billet crank corila rods ross pistons dart pro1 230 heads comp roller cam.http://http://www.smittyscustomauto.com/subpage5.html

jhow66 · 10-02-2007, 09:43 PM

355 with all the goodies and NOS

drbyrdman · 10-02-2007, 10:27 PM

327 .30 over mild cam. waiting to go in 67 SWB

bobthecop · 10-03-2007, 09:29 AM

Those look nice, keep it going

Richard H. · 10-03-2007, 10:39 AM

Still waiting patiently to be installed

383

Spray-Bomb · 10-03-2007, 03:51 PM

Dang I need a newer pic !!!

350, RPM Air Gap, "RV" cam (yeah right, more like as big as one), think it has flat tops

Don't really know what all is in it, cuz my brother built it & he doesn't remember either
It runs ok, but I plan to build something different some day

swb85 · 10-03-2007, 05:34 PM

1969 L48 stroked to 383ci, scat crank/rods, ARP everywhere, vortec heads, rpm air gap, comp roller cam/rockers, 10.4:1 compression, ~450hp/475tq......runs on 91 octane all day.

If ya wanna see/hear it run: http://s85.photobucket.com/albums/k5...nt=383idle.flv

Sinister · 10-03-2007, 06:20 PM

swb85, very nice motor...

fastom · 10-03-2007, 06:34 PM

Heres mine, GM ZZ383. Demon carb, Sanderson headers, March serpentine system.

57sailplane · 10-03-2007, 07:24 PM

hey nitrofn,

that thing is awsome..

would you mind tellin me what mid and front plate you using for engine mounts...

C10-Driver · 10-03-2007, 08:40 PM

Here is mine...

355 Small Block Chevy
Edelbrock Performer RPM aluminium heads
Performer RPM cam with full roller rockers
Endurashine Performer RPM intake
Holley 670cfm Street Avenger carb
March Performance Serpentine pulleys & brackets
Edelbrock Ceramic Coated Headers & 2-1/2” Dual Exhaust

Name: 2007_0407_70-C10_Chassis0002.jpg
Views: 1441
Size: 66.0 KB

Name: 2007_0407_70-C10_Chassis0002.jpg
Views: 1441
Size: 66.0 KB

Name: 2007_0407_70-C10_Chassis0011.jpg
Views: 1116
Size: 67.7 KB

Name: 2007_0923_70-C10_Driveway0009.jpg
Views: 629
Size: 65.6 KB

Name: 2007_0923_70-C10_Pandosy0029.jpg
Views: 611
Size: 63.0 KB

jorgensensc · 10-03-2007, 08:43 PM

Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!!

bryanw1968 · 10-03-2007, 08:54 PM

Quote:

Originally Posted by jorgensensc

Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!!

THAT is the coolest motor I've seen so far my friend.

jorgensensc · 10-03-2007, 09:07 PM

Quote:

Originally Posted by bryanw1968

THAT is the coolest motor I've seen so far my friend.

THank you very much. I know it doesn't compare to some of these high doller beauties here, but I was going for the clean understated look. It will go well with the Hot Rodz Flat Black that the truck will be painted. Again, Thank you for the compliment!
Shawn

Zumo · 10-03-2007, 10:51 PM

These are all some nice motors. Here's mines.

10-01-2007, 11:46 PM	#1
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Let's see some sbc mighty mouse motors!!!! Here's mine!!!!! Attached Images __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

10-02-2007, 12:02 AM	#2
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Let's see some sbc mighty mouse motors!!!! OK...I'm in. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:29 PM.

10-02-2007, 11:08 AM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Let's see some sbc mighty mouse motors!!!! Here's my might 400 SBC that I had rebuilt recently that is in my 70 K5. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-02-2007, 12:40 PM	#5
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: Let's see some sbc mighty mouse motors!!!! That is a bada$$ engine SactoJim!! That bottom end looks clean enough to eat off of..... Here's mine installed. Specs... 010 block bored .60 over, Heads off of an old LT1 (487 casting I think), ceramic coated headers, Edel RPM Intake, Edel 1406 Carb. Attached Images Last edited by Ole Blue 68; 10-02-2007 at 12:49 PM.

10-02-2007, 12:51 PM	#6
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: Let's see some sbc mighty mouse motors!!!! 383. I made it out of a 1971 Monte Carlo 350 and a 400 crank a machinist/bud had laying around his shop. Stock heads (rebuilt). Edlebrock carb (1406) and aluminum intake. Pulls my boat around easy enough. However this thing could really use some upgraded heads. Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

10-02-2007, 12:54 PM	#7
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Re: Let's see some sbc mighty mouse motors!!!! Here is mine. I need updated pic's Attached Images __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

10-02-2007, 01:15 PM	#8
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Let's see some sbc mighty mouse motors!!!! 1968 327 with all kinds of goodies inside Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

10-02-2007, 01:35 PM	#9
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Let's see some sbc mighty mouse motors!!!! Here's mine, but its not in a truck. Its a 540HP 11 : 1 383 with ported 230cc Dart heads, Comp custom roller cam, ported Wieand Team G intake, 830 cfm Holley race carb, and Holley Annihilator ingnition. It runs 11.20's in a 3400# stock suspension 82 Z28 street car. I have run a best of a 11.86 @ 127 in the 1/4 (6.97 @ 102 in the 1/8) with a small NOS 100HP plate system. Click the link to hear it! http://www.zshare.net/audio/39759456c15893/ Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 10-02-2007 at 01:39 PM.

10-02-2007, 09:04 PM	#11
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Let's see some sbc mighty mouse motors!!!! Not sure how to upload pics yet here is a link to my 434 small block. Billet crank corila rods ross pistons dart pro1 230 heads comp roller cam.http://http://www.smittyscustomauto.com/subpage5.html

10-02-2007, 09:43 PM	#12
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Let's see some sbc mighty mouse motors!!!! 355 with all the goodies and NOS Attached Images __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

10-02-2007, 10:27 PM	#13
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Let's see some sbc mighty mouse motors!!!! 327 .30 over mild cam. waiting to go in 67 SWB Attached Images

10-03-2007, 09:29 AM	#14
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: Let's see some sbc mighty mouse motors!!!! Those look nice, keep it going __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

10-03-2007, 10:39 AM	#15
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: Let's see some sbc mighty mouse motors!!!! Still waiting patiently to be installed 383 Attached Images

10-03-2007, 03:51 PM	#16
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Let's see some sbc mighty mouse motors!!!! Dang I need a newer pic !!! 350, RPM Air Gap, "RV" cam (yeah right, more like as big as one), think it has flat tops Don't really know what all is in it, cuz my brother built it & he doesn't remember either It runs ok, but I plan to build something different some day __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 10-03-2007 at 03:51 PM.

10-03-2007, 05:34 PM	#17
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: Let's see some sbc mighty mouse motors!!!! 1969 L48 stroked to 383ci, scat crank/rods, ARP everywhere, vortec heads, rpm air gap, comp roller cam/rockers, 10.4:1 compression, ~450hp/475tq......runs on 91 octane all day. If ya wanna see/hear it run: http://s85.photobucket.com/albums/k5...nt=383idle.flv __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD Last edited by swb85; 10-04-2007 at 05:00 PM.



Register or Log In To remove these advertisements.

10-03-2007, 06:20 PM	#18
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Let's see some sbc mighty mouse motors!!!! swb85, very nice motor... __________________ Beat it to fit, Paint it to match...

10-03-2007, 06:34 PM	#19
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Let's see some sbc mighty mouse motors!!!! Heres mine, GM ZZ383. Demon carb, Sanderson headers, March serpentine system. Attached Images Last edited by fastom; 10-05-2007 at 12:49 AM.

10-03-2007, 07:24 PM	#20
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Let's see some sbc mighty mouse motors!!!! hey nitrofn, that thing is awsome.. would you mind tellin me what mid and front plate you using for engine mounts...

10-03-2007, 08:40 PM	#21
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Let's see some sbc mighty mouse motors!!!! Here is mine... 355 Small Block Chevy Edelbrock Performer RPM aluminium heads Performer RPM cam with full roller rockers Endurashine Performer RPM intake Holley 670cfm Street Avenger carb March Performance Serpentine pulleys & brackets Edelbrock Ceramic Coated Headers & 2-1/2” Dual Exhaust __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

10-03-2007, 08:43 PM	#22
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Let's see some sbc mighty mouse motors!!!! Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-03-2007, 10:51 PM	#25
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Let's see some sbc mighty mouse motors!!!! These are all some nice motors. Here's mines. Attached Images __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

Register or Log In To remove these advertisements.