8" k10 lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

moose83772 · 10-08-2007, 01:15 PM

has anyone looked into this? what is the best prices you have found and where for a complete spring lift. no add a leaf and block. finally have some money and this is the next step.

Ace in the hole · 10-08-2007, 04:16 PM

I have been looking at 2.5" kits and am leaning towards skyjacker. Here is their 8" kit- http://store.summitracing.com/partde...5&autoview=sku

moose83772 · 10-08-2007, 06:37 PM

WWW.4WHEELONLINE.COM has them. they have free shipping and handling. so it beats summit by about $9

earl87gta · 10-08-2007, 06:39 PM

What are you going to use the truck for rocks trial mud mall? For an 8 in lift I would do the 52in spring frnt convertion with 4in springs in the front that will give you 8in but a better ride then an 8in spring for the back schackle flip and 4in springs. it will cost more this way but theride should be alot better and you will have more flex on the trials. I have a shy jacker 6in lift on the burb it rides nice I hade a 6in BDS on the blazer and it was a softer ride and they flexed beter then the sky jackers.

moose83772 · 10-08-2007, 07:20 PM

its going to be a show truck that will be towing a 2k gooseneck with a 2300 lb car. no trails or anything.

earl87gta · 10-09-2007, 01:00 AM

Then the sky jacker kit may be your best bet it will be the cheaper route for a complete kit. But you may want to call Steave over at ORD offroad design to see how much a set of BDS springs would cost you.

10-08-2007, 01:15 PM	#1
moose83772 Registered User Join Date: Feb 2007 Location: colorado Posts: 32	8" k10 lift has anyone looked into this? what is the best prices you have found and where for a complete spring lift. no add a leaf and block. finally have some money and this is the next step.

10-08-2007, 04:16 PM	#2
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: 8" k10 lift I have been looking at 2.5" kits and am leaning towards skyjacker. Here is their 8" kit- http://store.summitracing.com/partde...5&autoview=sku __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

10-08-2007, 06:37 PM	#3
moose83772 Registered User Join Date: Feb 2007 Location: colorado Posts: 32	Re: 8" k10 lift WWW.4WHEELONLINE.COM has them. they have free shipping and handling. so it beats summit by about $9

10-08-2007, 06:39 PM	#4
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: 8" k10 lift What are you going to use the truck for rocks trial mud mall? For an 8 in lift I would do the 52in spring frnt convertion with 4in springs in the front that will give you 8in but a better ride then an 8in spring for the back schackle flip and 4in springs. it will cost more this way but theride should be alot better and you will have more flex on the trials. I have a shy jacker 6in lift on the burb it rides nice I hade a 6in BDS on the blazer and it was a softer ride and they flexed beter then the sky jackers. __________________ Earl 68 2500 4x4 GMC Burb

10-08-2007, 07:20 PM	#5
moose83772 Registered User Join Date: Feb 2007 Location: colorado Posts: 32	Re: 8" k10 lift its going to be a show truck that will be towing a 2k gooseneck with a 2300 lb car. no trails or anything.

10-09-2007, 01:00 AM	#6
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: 8" k10 lift Then the sky jacker kit may be your best bet it will be the cheaper route for a complete kit. But you may want to call Steave over at ORD offroad design to see how much a set of BDS springs would cost you. __________________ Earl 68 2500 4x4 GMC Burb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.