![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2007
Location: Fayetteville, NC
Posts: 83
|
Look What I did with this Used $700 Engine
I Bought This Engine for $700 from a friend of mine, It came with a Holley 750 carb, used 1 5/8 headers and HEI ignition, 8.8mm Accel Wires. It was rebuild about 4 years ago but only has around 2500miles since rebuild. It is a 1970 350 4 bolt block with .25cc TRW dome pistons. The heads are some rare 67 327ci Corvette with big 2.02 intake valves. 64cc.I was told it should have around 11:1 It already had a CC 280H camshaft, so no upgrading was needed. After disassembling the engine two of the existing push rods where broken so I replaced them with 16 Chrome Molly ones. The existing Intake was a single plane Weiand which was robbing some bottom end power and was replaced with a new Dual plane Edelbrock. All new gaskets, Bolts and a couple of spray cans i think I gave this Wanna Be Hot rod engine what it deserves. All together it took me 12h of Labor total, a few more and I should be able to fire it up. i also spent an additional $340 on top of the 700.
__________________
There is no replacement for displacement! |
![]() |
![]() |
![]() |
#2 |
I dun gradjiated collij!!!
Join Date: Jan 2006
Location: St. Helens Oregon
Posts: 1,751
|
Re: Look What I did with this Used $700 Engine
Looks sweet, I love those valve covers
![]()
__________________
Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed!
2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2007
Location: tracy california
Posts: 77
|
Re: Look What I did with this Used $700 Engine
Looks very clean bud.
|
![]() |
![]() |
![]() |
#4 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Look What I did with this Used $700 Engine
Looks rebuilt! Didn`t you want to put roller-tip rockers on while you were replacing the pushrods?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2007
Location: Fayetteville, NC
Posts: 83
|
Re: Look What I did with this Used $700 Engine
It came with Stamped steel roller rockers. I changed out the freeze plugs thats why it looks New Rebuild. Tomorrow or in 8 hours haha, I will bolt up the oil pan with a new one piece rubber gasket set. they are so much better than cork.
__________________
There is no replacement for displacement! |
![]() |
![]() |
![]() |
#6 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Re: Look What I did with this Used $700 Engine
Be when you careful tighten down the alternator bolt. I've seen many a double hump get cracked from people drilling a hole in the thin part of the casting like that. Make sure you put some permatex on the threads of the alternator bolt or it will leak coolant when it gets to running temperature.
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 10-09-2007 at 08:14 AM. |
![]() |
![]() |
![]() |
#7 |
The master of disaster
Join Date: Nov 2006
Location: Warsaw Texas
Posts: 249
|
Re: Look What I did with this Used $700 Engine
Verry nice man and a good choice in the breather filters too
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: Look What I did with this Used $700 Engine
Who makes the valve covers.? And how much $?
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2007
Location: Fayetteville, NC
Posts: 83
|
Re: Look What I did with this Used $700 Engine
Look for Skip White performance on Ebay Motors, $62 including shipping
__________________
There is no replacement for displacement! |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: Look What I did with this Used $700 Engine
all looks good but the valve cover breather looks out of place to me.
jmo bob
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#11 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Re: Look What I did with this Used $700 Engine
I also really like those valve covers - engine looks great!
Looks like the covers are Item number: 260168750688
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 10-10-2007 at 05:43 PM. |
![]() |
![]() |
![]() |
#12 |
I dun gradjiated collij!!!
Join Date: Jan 2006
Location: St. Helens Oregon
Posts: 1,751
|
Re: Look What I did with this Used $700 Engine
I love mine, a$$ load better than the stamped chrome crap that was on it.
Skip White Performance alsp has the kewl fuel filter with brass inserts as well ![]() Your engine looks great, I've been thinking of pulling mine and cleanin' it up.
__________________
Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed!
2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2007
Location: Fayetteville, NC
Posts: 83
|
Re: Look What I did with this Used $700 Engine
Do it while the weather is still nice, pull it out . Plan everything before hand. Make a list of everything you need to buy at the parts store. It will eliminate lots of trips to the parts store. I like to organize my work area before i even get started. I hate when I spend to much time looking for stuff then actual wrenching. A nice weekend and you can knock it out.
__________________
There is no replacement for displacement! |
![]() |
![]() |
![]() |
#14 |
I dun gradjiated collij!!!
Join Date: Jan 2006
Location: St. Helens Oregon
Posts: 1,751
|
Re: Look What I did with this Used $700 Engine
That seems to be a cardinal sin for me...... ![]()
__________________
Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed!
2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! |
![]() |
![]() |
![]() |
#15 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Look What I did with this Used $700 Engine
(In your best Homer Simpson voice) Uuuuuugggggghhhhhhhhh...........
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#16 |
Happy Camper
Join Date: Feb 2006
Location: Northern California
Posts: 8,408
|
Re: Look What I did with this Used $700 Engine
very nice!
__________________
RIP El Jay! Love you brother! |
![]() |
![]() |
![]() |
#17 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,212
|
Re: Look What I did with this Used $700 Engine
looks good, almost too fancy.
![]() |
![]() |
![]() |
![]() |
#18 |
"1972 C5"
Join Date: Jul 2004
Location: SoCal
Posts: 729
|
Re: Look What I did with this Used $700 Engine
![]() ![]() |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: Look What I did with this Used $700 Engine
So what is it going into?
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Apr 2007
Location: Fayetteville, NC
Posts: 83
|
Re: Look What I did with this Used $700 Engine
I sold the engine to a friend that is serving in the army. It is going into a 71 Nova. He is still In the Dessert so it will be a few more month till it will be installed.
__________________
There is no replacement for displacement! |
![]() |
![]() |
![]() |
Bookmarks |
|
|