lets see those interiors! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CoreyK · 10-10-2007, 07:52 PM

I need some ideas for my interior on my project truck (1970 k10). So lets see what every one has done!

matthufham · 10-10-2007, 08:23 PM

here

70c10 · 10-10-2007, 08:32 PM

Matt- that's the truck version megashifter, right?. If so, does the handle touch the seat when you put it down in first gear???

matthufham · 10-10-2007, 11:52 PM

Quote:

Originally Posted by 70c10

Matt- that's the truck version megashifter, right?. If so, does the handle touch the seat when you put it down in first gear???

yes truck megashifter

there's an inch gap between it and the seat at the least when slamming down.

the seat's all the way back, but if the seat is foward at all, yes the shifter touches it. it's all about how the floor bracket is mounted.

EAST SIDE LOW LIFE · 10-11-2007, 02:26 AM

My 70' GMC interior.

esll.

Andy4639 · 10-11-2007, 07:00 AM

Not the best pictures but it's all I have right now. Seat is a 60/40 out of a later model 80" truck. I bought the material to match it and the wife did the rest.

1971ChevyTruck · 10-10-2007, 10:10 PM

Nice and clean looking...hope mine looks that good when I'm done...

67ChevyRedneck · 10-11-2007, 01:18 PM

Only things I did that were "different" was the door panels.

67ChevyRedneck · 10-11-2007, 01:31 PM

^You're seat is out of an 88-98 silverado, although, I think that style was only used from 88-93.

Goplay2 · 10-14-2007, 06:55 PM

Quote:

Originally Posted by CoreyK

I need some ideas for my interior on my project truck (1970 k10). So lets see what every one has done!

Here is my 70' k10 , i had them use vinyl on the metal door panels as the seat and dash.

10-10-2007, 07:52 PM	#1
CoreyK Registered User Join Date: Oct 2007 Location: Connecticut Posts: 18	lets see those interiors! I need some ideas for my interior on my project truck (1970 k10). So lets see what every one has done!

10-10-2007, 08:23 PM	#2
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: lets see those interiors! here Attached Images

10-10-2007, 08:32 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: lets see those interiors! Matt- that's the truck version megashifter, right?. If so, does the handle touch the seat when you put it down in first gear??? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-11-2007, 02:26 AM	#5
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: lets see those interiors! My 70' GMC interior. esll. Attached Images __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

10-11-2007, 07:00 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: lets see those interiors! Not the best pictures but it's all I have right now. Seat is a 60/40 out of a later model 80" truck. I bought the material to match it and the wife did the rest. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-10-2007, 10:10 PM	#7
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: lets see those interiors! Nice and clean looking...hope mine looks that good when I'm done...

10-11-2007, 01:18 PM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: lets see those interiors! Only things I did that were "different" was the door panels. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-11-2007, 01:31 PM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: lets see those interiors! ^You're seat is out of an 88-98 silverado, although, I think that style was only used from 88-93. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.