Another 700r4 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

the_goat · 10-20-2007, 08:05 PM

When I put a 700r4 in my 70 blazer I'm going to move the cross member back to make up for the difference in the length between the th350 and the 700r4. Does anyone know if the front or rear driveshaft from a newer truck/ blazer/ suburban would fit? I'm wondering if the transmission sits further back on the truck in the later years? I could be way off here but if anyone knows I would appreciate it.

the_goat · 10-21-2007, 06:35 PM

I remember reading in a thread a few months back that a later suburban with a stock 700r4 front driveshaft would work.

10-20-2007, 08:05 PM	#1
the_goat Registered User Join Date: Mar 2007 Location: Carlsbad, Ca Posts: 385	Another 700r4 question When I put a 700r4 in my 70 blazer I'm going to move the cross member back to make up for the difference in the length between the th350 and the 700r4. Does anyone know if the front or rear driveshaft from a newer truck/ blazer/ suburban would fit? I'm wondering if the transmission sits further back on the truck in the later years? I could be way off here but if anyone knows I would appreciate it.

10-21-2007, 06:35 PM	#2
the_goat Registered User Join Date: Mar 2007 Location: Carlsbad, Ca Posts: 385	Re: Another 700r4 question I remember reading in a thread a few months back that a later suburban with a stock 700r4 front driveshaft would work.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.