![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
DAOTM or MOTM...you pick.
Dear moderators....we need a new "of the month" category....either DAOTM (dumb @ss of the month) or MOTM (moron of the month)!
I hereby nominate myself for this new category. ....so last night I'm messing with some wheel spacers on the front wheels of my truck cuz I'm not happy with the offset (too anal). I know they aren't the best solution but they are only .25" and I'm not spending $700 bucks to correct .25". I knew that I would need to replace wheel studs with slightly longer ones cuz the spacers reduced the amount of "grab" of the lugs by too much, but for just around the parking lot it would be OK...after all I did get them to tighten down.........WRONG. After a few zips around the lot, I'm making a slow left hand turn when all of a sudden the left front corner takes a big dip followed by the sound of metal against asphalt!...I new immediately what happened, got out of the truck slowly, and inched my way aroung the front to survey the damage....SON OF A........! Folded up the rear edge of the fender...damn! (actual verbiage was more substantial, colorful, and accompanied by much body language as well). That looked to be the worst of it, but I still had to roll a floor jack out a couple hundred feet, figure out how to jack it up...couple more trips back to the shop to get some wood blocks...it's fricken dark now...studs are screwed up, so I'm have a helluva time getting lugs back on.....GOD I hope nobody sees me!...just wanna get it back in the shop and go home. I don't remember the drive home and the wife said I just curled up in a ball in the corner and was unresponsive the rest of the night! My psychologist said I should share my experience cuz it will make me feel better...right. ...and no pics cuz I refuse to document my stupidity any further!
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - ![]() My Build Thread Last edited by SactoJim; 10-27-2007 at 04:01 PM. |
![]() |
![]() |
![]() |
#2 |
PITbut
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
|
Re: DAOTM or MOTM...you pick.
HAHA, Horrible story. Hope everything works out. I will vote for you if they do add a DAOTM.
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: DAOTM or MOTM...you pick.
Hey, things happen. If that's the worst thing that you have happen on your build, then you'll be doing pretty good.
![]()
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD ![]() Click here to support the board Philippians 4: 6-7 |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: DAOTM or MOTM...you pick.
at least tell us the fender was an old ugly piece, and not one with fresh paint!
|
![]() |
![]() |
![]() |
#5 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: DAOTM or MOTM...you pick.
Ouch, that sucks...
![]()
__________________
Beat it to fit, Paint it to match... ![]() |
![]() |
![]() |
![]() |
#6 | |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Re: DAOTM or MOTM...you pick.
Quote:
![]()
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2007
Location: Moore, Oklahoma
Posts: 2,396
|
Re: DAOTM or MOTM...you pick.
I hope this photo will ease your mind that you are not the only dumb a$$ out there -- check the bedside behind the back wheel- lack of a center cap is a dead giveaway too ---- very similar situation and conditions to your event --- except i had the Creedence cranked so loud i didnt even hear the wheel wobbling around against the brake drum
![]() Last edited by streetstar; 10-27-2007 at 05:03 PM. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2005
Location: White Rock Canada
Posts: 865
|
Re: DAOTM or MOTM...you pick.
I think to truly get past this terrible event in your life, and move on. You must post a pic. Until then, you further subject yourself to deep emotional scarring which will effect and cloud your judgement causing you to go to the dark side, adding a 6" lift from stock height.
![]() all seriousness, glad you weren't hurt.
__________________
1972 GMC Sierra 1972 GMC Super Custom Suburban |
![]() |
![]() |
![]() |
#9 |
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,887
|
Re: DAOTM or MOTM...you pick.
I am sorry this happened, it obvious how much you've fretted over making this truck as perfect as can be. A little body work, some paint and longer studs and you're back on the road.
Last edited by CG; 10-27-2007 at 05:16 PM. |
![]() |
![]() |
![]() |
#10 |
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: DAOTM or MOTM...you pick.
Oh my! I think I'd be sick
![]() ![]()
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting Last edited by BACKYARD88; 10-27-2007 at 05:11 PM. Reason: typo |
![]() |
![]() |
![]() |
#11 | ||
Registered User
![]() Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
Re: DAOTM or MOTM...you pick.
Quote:
Quote:
You're right.....and ouch,that did hurt! Seriously the damage isn't too bad, but I do have to take it off, do a little body work, and refinish it hoping I can keep body work away from the door edge side as much as possible so I don't have any color match problems. ......and I HATE doing crap twice! Certainly with some of the parking lot blasts I was making, it could've been ALOT worse!! LESSON LEARNED!......least till I do something else stupid!
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - ![]() My Build Thread |
||
![]() |
![]() |
![]() |
#12 | |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Re: DAOTM or MOTM...you pick.
Quote:
![]()
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
|
![]() |
![]() |
![]() |
#13 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,929
|
Re: DAOTM or MOTM...you pick.
Sorry to hear of the mishap.
I don't think the competitions would be fair, as I don't think we could ever pick a true d&*^*$$ of the month winner. The competition would be to close to pick just one winner ![]() ![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 10-27-2007 at 07:29 PM. |
![]() |
![]() |
![]() |
#14 |
Licensed to Thrill!
Join Date: Apr 2006
Location: Northwest, GA
Posts: 1,673
|
Re: DAOTM or MOTM...you pick.
Ok Jim - gotta ask...
If you were getting new studs anyhow, and you were just putting the spacers on there with those studs to see how it looked until you got the new studs put in... Why the need to drive it around the parking lot in the first place? DLB |
![]() |
![]() |
![]() |
#15 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: DAOTM or MOTM...you pick.
Since you have the lower trim, you can fix mask and paint the lower corner, put the trim back on, and no one will ever know....
![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#16 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: DAOTM or MOTM...you pick.
Sorry to hear about the truck! Lessoned learned, and I feel as though I have learned something from your experience as well....
"To remember to bring blocks when dragging a floor jack across a parking lot, so you don't have to make another trip back to the shop." Just kidding, I'm really sorry to hear about the truck. Here's to getting it put back to the way it was.
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 10-28-2007 at 08:36 AM. |
![]() |
![]() |
![]() |
#17 | ||
Registered User
![]() Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
Re: DAOTM or MOTM...you pick.
Quote:
Quote:
Last night I got the damage pretty much straightened out and put a little filler on it.
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - ![]() My Build Thread |
||
![]() |
![]() |
![]() |
#18 |
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: DAOTM or MOTM...you pick.
I think if there is a such award here...I would end up with it most of the time.
Sorry about your luck dude. That has to suck for such a nice truck. So heres one for me. i was cutting some metal yesterday. I was using a angle grinder with a cut off wheel.Works pretty good....then it happened...the wheel came apart. Where did part of it go?? Right into my left nut!!..I hope i can say that here. So a little jumping around..and going into the house to see how much damage was done...I came out ok...but cut down there.
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
Re: DAOTM or MOTM...you pick.
Any member of the male species who knows what a cut off wheel can do will "CRINGE"...(make that weird face) when they read that and get to the "nut" part.
All of a sudden that damage on my truck seems less severe! NOTE TO SELF....always where a cup when using a cut off wheel!
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - ![]() My Build Thread |
![]() |
![]() |
![]() |
#20 |
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: DAOTM or MOTM...you pick.
Jim that exactly what I thought when that happened. I had on safty glasses...heavy carhart coat...heavy gloves....what did I forget??
CUP! ![]()
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,982
|
Re: DAOTM or MOTM...you pick.
Quote:
Safety glasses; check. Leather gloves; check. Ear protection; check. Cup . . ..... WTF?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 10-28-2007 at 03:00 PM. |
|
![]() |
![]() |
![]() |
#22 | |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: DAOTM or MOTM...you pick.
Quote:
![]() ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
![]() |
![]() |
![]() |
#23 | |
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: DAOTM or MOTM...you pick.
Quote:
![]()
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
![]() |
![]() |
![]() |
#24 | |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,284
|
Re: DAOTM or MOTM...you pick.
Quote:
![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
|
![]() |
![]() |
![]() |
#25 |
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: DAOTM or MOTM...you pick.
The metal I was cutting was at that level. Yeah remember kids.... wear a cup when doing such a task. It will make you happier in the end.
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
![]() |
![]() |
![]() |
Bookmarks |
|
|