2006 chevy seats, integrated seat belts, pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

04Xrider · 10-28-2007, 07:35 PM

I landed these seats off ebay, Man I love these seats. All I have left now is to finish up my power steering, and I am ready for body work and paint.

Chevysdominate · 10-28-2007, 08:01 PM

Looks nice!

How much work was it to fit the seats?

1966gmc · 10-28-2007, 08:17 PM

Thats pretty badass looking man.Good job.Im also wondering how hard the install was

04Xrider · 10-28-2007, 08:27 PM

They were a piece of cake to install. The center seat fit perfect over the hump. And the outer seats just sat nice and flush beside it. I will say if the bottom rails were any wider, they would go past the down curve of the floorboard, but they went right to the edge for a flush fit. I used 3/8 bolts and under the floorboards, I used flat washers with lock washers.

Stepside65 · 10-28-2007, 09:00 PM

Me like. What year did those come out of?

Edit: Nevermind. I am an idiot that didn't pay enough attention

BIG CTY · 10-28-2007, 09:13 PM

Quote:

Originally Posted by Stepside65

Me like. What year did those come out of?

You must still be high from getting your "new" stepside bed. The title says 2006...

I think those seats with the integrated seat belts come out of all 99 and ups.

I'm glad to FINALLY see the seats I covet so much recently put into one of our trucks. I'll get some one day when I can find them REASONABLY priced!

04Xrider · 10-28-2007, 10:01 PM

Quote:

Originally Posted by BIG CTY

You must still be high from getting your "new" stepside bed. The title says 2006...

I think those seats with the integrated seat belts come out of all 99 and ups.

I'm glad to FINALLY see the seats I covet so much recently put into one of our trucks. I'll get some one day when I can find them REASONABLY priced!

I think your right. When I was looking for seats, I seen the same style from a 1999 silverado.

SkylineNXS · 10-28-2007, 10:14 PM

If i remember correctly, in early threads here, members recommended that the floor should really be reinforced under the seats, because if ur in an accident, the seats will pull through the floor. You might wanna search for other threads on this issue...

BRAD

04Xrider · 10-28-2007, 11:55 PM

Quote:

Originally Posted by SkylineNXS

If i remember correctly, in early threads here, members recommended that the floor should really be reinforced under the seats, because if ur in an accident, the seats will pull through the floor. You might wanna search for other threads on this issue...

BRAD

I did see that thread. And I am not to worried about it for several reasons. I have used pretty good size flat washers on the under side, that alone would take a hugh force to pull them through. Second, the stock seat belts had two attachment points, and if you had three people in the truck, the center person shared one of those. The seats have four attachments each for a total of 12 bolts. That is considerably more then the 1,1/2 or two (depending on passengers)That the stock belts used. Third, I am only 140 lbs, a wet noodle could just about secure me

SkylineNXS · 10-28-2007, 11:58 PM

lol, good poitn, thats cool. Ive also wanted these seats, but have not yet gone out to find any, look really nice in there, is the "ride height" about the same as with the bench?

BRAD

04Xrider · 10-29-2007, 12:41 AM

Quote:

Originally Posted by SkylineNXS

lol, good poitn, thats cool. Ive also wanted these seats, but have not yet gone out to find any, look really nice in there, is the "ride height" about the same as with the bench?

BRAD

Yes they seem to be the same height, but a little more comfy.

littlee_domn8r · 10-29-2007, 03:58 PM

Nice seats! If you don't mind my asking, How much did they set you back?

04Xrider · 10-29-2007, 09:40 PM

Quote:

Originally Posted by littlee_domn8r

Nice seats! If you don't mind my asking, How much did they set you back?

They were a little steep! $520.00 plus shipping. The sad thing was, I just missed another set by 10 minutes, from the same seller, same year, color, and they were electric. They went for $250.00. I would have bought them, but the ones I got are in keeping with my plan to have nice upgrades, but keeping it simple.

Real_McCoy · 10-30-2007, 12:28 AM

These are the seats I am going to install someday. I found a set at a local salvage yard for $150. I was told that the driver's side had a small tear in it. They had several sets for under $500. Run a search on http://www.car-parts.com. This seat style is in all Chevy/GMC trucks since '99.

What kind of leg room is left (at 140 lbs I bet plenty)? Is the tank still in the cab or is it relocated?

Thanks for sharing.

pat66 · 10-30-2007, 05:03 AM

They look great.have a aset of electric's yet to be installed.Still trying to figure out the wireing

Iron-Butt · 10-30-2007, 05:56 PM

looks good

kris's66lwb · 10-30-2007, 07:35 PM

any one know where i can pick out a set of thease for cheep in san deigo

orange66fleet · 11-07-2007, 11:20 AM

I just found a set of seats out of a wrecked 2001 2500 silverado, the only difference is the center seat does not fold down, but it does have the much needed cup holders. The also have the seat belt problem fixed at the same time. $75 and I pulled them out myself in 15 minutes. I found the post in the parts section 99 and up chevy trucks. I threw them in and they fit like a glove and they feel good too. I will get some pictures soon. The real good thing was I looked at the prices of seat belts and they were expensive and this is a great alternitive.

04Xrider · 11-07-2007, 11:43 AM

Quote:

Originally Posted by orange66fleet

I just found a set of seats out of a wrecked 2001 2500 silverado, the only difference is the center seat does not fold down, but it does have the much needed cup holders. The also have the seat belt problem fixed at the same time. $75 and I pulled them out myself in 15 minutes. I found the post in the parts section 99 and up chevy trucks. I threw them in and they fit like a glove and they feel good too. I will get some pictures soon. The real good thing was I looked at the prices of seat belts and they were expensive and this is a great alternitive.

Congrtats on your new seat. You got a steal. These seats are really nice considering the seatbelt laws and all. Just pull the shoulder harness down and click, you are snug as a bug in a rug

Lane · 11-07-2007, 12:00 PM

I like the old school bench look, but those seats look really good in there - and having seatbelts is a nice bonus... hhmmmm.

jchav62 · 11-07-2007, 12:55 PM

I like em! Looks real nice. Now I'm gonna have to keep an eye out for a set for the '65.

65GMChevy · 01-08-2024, 09:01 PM

Do you have a picture of the base of the seat, just want to see how they look when you open the door.

forestb · 01-19-2024, 03:57 PM

Do you have a photo of the brackets and sliders.

10-28-2007, 07:35 PM	#1
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	2006 chevy seats, integrated seat belts, pics I landed these seats off ebay, Man I love these seats. All I have left now is to finish up my power steering, and I am ready for body work and paint. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift Last edited by 04Xrider; 10-28-2007 at 07:37 PM.

10-28-2007, 08:01 PM	#2
Chevysdominate Registered User Join Date: Jul 2006 Location: Springtucky, Oregon Posts: 265	Re: 2006 chevy seats, integrated seat belts, pics Looks nice! How much work was it to fit the seats?

10-28-2007, 08:17 PM	#3
1966gmc Why does it taste purple? Join Date: Sep 2007 Location: Cambridge Md Posts: 621	Re: 2006 chevy seats, integrated seat belts, pics Thats pretty badass looking man.Good job.Im also wondering how hard the install was

10-28-2007, 08:27 PM	#4
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: 2006 chevy seats, integrated seat belts, pics They were a piece of cake to install. The center seat fit perfect over the hump. And the outer seats just sat nice and flush beside it. I will say if the bottom rails were any wider, they would go past the down curve of the floorboard, but they went right to the edge for a flush fit. I used 3/8 bolts and under the floorboards, I used flat washers with lock washers. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift

10-28-2007, 09:00 PM	#5
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: 2006 chevy seats, integrated seat belts, pics Me like. What year did those come out of? Edit: Nevermind. I am an idiot that didn't pay enough attention __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor Last edited by Stepside65; 10-28-2007 at 09:32 PM.

10-28-2007, 10:14 PM	#8
SkylineNXS Registered User Join Date: Oct 2006 Location: Elgin, IL Posts: 658	Re: 2006 chevy seats, integrated seat belts, pics If i remember correctly, in early threads here, members recommended that the floor should really be reinforced under the seats, because if ur in an accident, the seats will pull through the floor. You might wanna search for other threads on this issue... BRAD __________________ 2000 GMC Sierra EXT Cab Short 4x4, finally mine... 1966 C10 SWB Fleet, 250 I6, three on the tree.... Previously Owned.... 1987 Chevy R10 "Silverado" (at least the badges were) Short Step 350 700r4.... 1972 Chevy LWB Fleet 350/350 EXTENDED CAB ALL THE WAY! .._..~...-...._...____ .._..-...______\|_\|__\____ ..-..~.\|_(O)__\|_\|__\|_(O)]

10-28-2007, 11:58 PM	#10
SkylineNXS Registered User Join Date: Oct 2006 Location: Elgin, IL Posts: 658	Re: 2006 chevy seats, integrated seat belts, pics lol, good poitn, thats cool. Ive also wanted these seats, but have not yet gone out to find any, look really nice in there, is the "ride height" about the same as with the bench? BRAD __________________ 2000 GMC Sierra EXT Cab Short 4x4, finally mine... 1966 C10 SWB Fleet, 250 I6, three on the tree.... Previously Owned.... 1987 Chevy R10 "Silverado" (at least the badges were) Short Step 350 700r4.... 1972 Chevy LWB Fleet 350/350 EXTENDED CAB ALL THE WAY! .._..~...-...._...____ .._..-...______\|_\|__\____ ..-..~.\|_(O)__\|_\|__\|_(O)]

10-29-2007, 03:58 PM	#12
littlee_domn8r AKA "Hurricane Hank" Join Date: Sep 2003 Location: Elk Point, South Dakota Posts: 316	Re: 2006 chevy seats, integrated seat belts, pics Nice seats! If you don't mind my asking, How much did they set you back? __________________ "looking back, knowing that you gave it your all.... win or lose, you finish a Champion" Dale Earnhardt "They say hard work never killed anyone, But why take a chance? 63 GMC C10 Custom LWB 355/350 AT 00 Chevy Silverado 1500 base V6/AT 07 Chevy Monte Carlo SS 5.3 V8

10-30-2007, 12:28 AM	#14
Real_McCoy Registered User Join Date: Oct 2007 Location: El Dorado, Kansas Posts: 198	Re: 2006 chevy seats, integrated seat belts, pics These are the seats I am going to install someday. I found a set at a local salvage yard for $150. I was told that the driver's side had a small tear in it. They had several sets for under $500. Run a search on http://www.car-parts.com. This seat style is in all Chevy/GMC trucks since '99. What kind of leg room is left (at 140 lbs I bet plenty)? Is the tank still in the cab or is it relocated? Thanks for sharing. __________________ Daniel 66 Chevy C10 LWB Support our troops!

10-30-2007, 05:03 AM	#15
pat66 Registered User Join Date: Apr 2007 Location: antioch tn Posts: 71	Re: 2006 chevy seats, integrated seat belts, pics They look great.have a aset of electric's yet to be installed.Still trying to figure out the wireing __________________ 02 Blazer 66 lwb step 66 lwb feet :flagw Working to live not living to work RIP RS

10-30-2007, 05:56 PM	#16
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: 2006 chevy seats, integrated seat belts, pics looks good __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-30-2007, 07:35 PM	#17
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: 2006 chevy seats, integrated seat belts, pics any one know where i can pick out a set of thease for cheep in san deigo

11-07-2007, 11:20 AM	#18
orange66fleet Lowered in Cleveland Join Date: Feb 2006 Location: Cleveland Posts: 120	Re: 2006 chevy seats, integrated seat belts, pics I just found a set of seats out of a wrecked 2001 2500 silverado, the only difference is the center seat does not fold down, but it does have the much needed cup holders. The also have the seat belt problem fixed at the same time. $75 and I pulled them out myself in 15 minutes. I found the post in the parts section 99 and up chevy trucks. I threw them in and they fit like a glove and they feel good too. I will get some pictures soon. The real good thing was I looked at the prices of seat belts and they were expensive and this is a great alternitive.

11-07-2007, 12:00 PM	#20
Lane Registered User Join Date: May 2007 Location: Fort Worth, TX Posts: 172	Re: 2006 chevy seats, integrated seat belts, pics I like the old school bench look, but those seats look really good in there - and having seatbelts is a nice bonus... hhmmmm. __________________ My junk - http://s117.photobucket.com/albums/o60/Lane40/ www.wheelpros.com

11-07-2007, 12:55 PM	#21
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 2006 chevy seats, integrated seat belts, pics I like em! Looks real nice. Now I'm gonna have to keep an eye out for a set for the '65. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

01-08-2024, 09:01 PM	#22
65GMChevy Registered User Join Date: Mar 2012 Location: Vacaville ca Posts: 10	Re: 2006 chevy seats, integrated seat belts, pics Do you have a picture of the base of the seat, just want to see how they look when you open the door.

01-19-2024, 03:57 PM	#23
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 2006 chevy seats, integrated seat belts, pics Do you have a photo of the brackets and sliders.

Register or Log In To remove these advertisements.