WTB - Hubcaps for clip wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 10-29-2007, 12:18 AM

I am looking for some 3/4t. hubcaps from '62-'67 that will fit these 8-lug wheels. The inside of the cap ring will measure about 9.0 inches.

stllookn · 10-29-2007, 12:19 AM

The back of the cap will look like these but the one on the right is a 1/2 t. cap and measures about 8-inches.

*LILRED66* · 10-29-2007, 08:55 AM

stllookn:

Good morning. I have the factory caps you are looking for. I will double-check my inventory. I believe they are for the eight lug 3/4 ton factory wheels with clips. They are the painted variety. I will check and let you know.

Tony Smith

stllookn · 10-29-2007, 09:49 PM

Tony, Thanks...any year will do. Hub caps are like ties...one for each day of the week...LOL!

**too much stuff** · 10-30-2007, 12:41 PM

I have a set of driver quality painted ones that come off of a set of 8 1/2 inch wide wheels. I think the truck was a 68. Let me know if you want more info, Eric

*LILRED66* · 10-30-2007, 09:56 PM

Here is a set of three bowtie caps and one GMC cap. I would consider them daily driver quality. They are 9", so they fit the factory eight lug wheels with clips. Take a look and let me know your thoughts.

Tony Smith

**bigdon-70blazer** · 02-28-2009, 09:35 AM

Quote:

Originally Posted by LILRED66

Here is a set of three bowtie caps and one GMC cap. I would consider them daily driver quality. They are 9", so they fit the factory eight lug wheels with clips. Take a look and let me know your thoughts.

Tony Smith

I know this is an ancient thread but did you sell these to stllookin or do you have more like this?
Please and sorry to hijack!

*LILRED66* · 02-28-2009, 10:21 AM

Good morning and thanks for digging this one up. I still have a complete set of four, so let me know if these fit your application and taste.

*LILRED66* · 03-02-2009, 09:41 PM

Don:

The only two sets I have are for the eight lug wheels, so I am not going to be able to help you with the six lug caps.

Sorry for the mishap.

Redline · 03-11-2009, 06:25 PM

Do you have a picture of these caps? I do have the eight lug wheels. Shouldn't matter but mine is a dually... let me know how much.

Quote:

Originally Posted by LILRED66

Don:

The only two sets I have are for the eight lug wheels, so I am not going to be able to help you with the six lug caps.

Sorry for the mishap.

10-29-2007, 12:18 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	WTB - Hubcaps for clip wheels I am looking for some 3/4t. hubcaps from '62-'67 that will fit these 8-lug wheels. The inside of the cap ring will measure about 9.0 inches. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-29-2007, 12:19 AM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: WTB - Hubcaps for clip wheels The back of the cap will look like these but the one on the right is a 1/2 t. cap and measures about 8-inches. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-29-2007, 08:55 AM	#3
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB - Hubcaps for clip wheels stllookn: Good morning. I have the factory caps you are looking for. I will double-check my inventory. I believe they are for the eight lug 3/4 ton factory wheels with clips. They are the painted variety. I will check and let you know. Tony Smith

10-29-2007, 09:49 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: WTB - Hubcaps for clip wheels Tony, Thanks...any year will do. Hub caps are like ties...one for each day of the week...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-30-2007, 12:41 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: WTB - Hubcaps for clip wheels I have a set of driver quality painted ones that come off of a set of 8 1/2 inch wide wheels. I think the truck was a 68. Let me know if you want more info, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-30-2007, 09:56 PM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB - Hubcaps for clip wheels Here is a set of three bowtie caps and one GMC cap. I would consider them daily driver quality. They are 9", so they fit the factory eight lug wheels with clips. Take a look and let me know your thoughts. Tony Smith Attached Images

02-28-2009, 10:21 AM	#8
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB - Hubcaps for clip wheels Good morning and thanks for digging this one up. I still have a complete set of four, so let me know if these fit your application and taste.

03-02-2009, 09:41 PM	#9
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB - Hubcaps for clip wheels Don: The only two sets I have are for the eight lug wheels, so I am not going to be able to help you with the six lug caps. Sorry for the mishap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.