Small Block New Thumper Camshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 10-31-2007, 07:32 PM

I HAVE A BRAND NEW ENGLE HYDRAULIC HOT ROD CAMSHAFT. this has never been in a engine. its a maxed out hydraulic grind like for pro street performance etc. power band is from 2500-7000 rpm,s . its recomended for 10-1 compression and up. if you want a cam that racks off this is it. i paid almost 300.00 for this and i,ll sell it for 125.00 delivered.
bob
spec,s.
in. 520 - exh. 537 lift
in. 294 - exh.310 diration

BCOWANWHEELS · 10-31-2007, 10:43 PM

ttt

396muncie · 11-01-2007, 08:17 AM

So this is an Engle cam, not a Comp Cams Thumpr cam, right? I couldn't find it on the Engle Cams website. What's the duration at .050 and the Lobe Seperation Angle(LSA)? Is it flat tappet or roller? Any part #? Thanks

BCOWANWHEELS · 11-01-2007, 12:49 PM

grind number EP28/30-HYD, INTAKE OPEN @20 EX CLOSES @22, INT. CLOSES @48 EXH. OPENS @ 58, GROSS CAM LIFT INT. 347 & DUR.@.050 IS 248,
GROSS CAM LIFT EXH IS 358 WITH DURATION 260 @.050.
LOBE CENTERS 106
ITS A HYDRAULIC LIFTER CAM , BIG AS YOU CAN GET AND WHAT THE ANTI PUMPUP LIFTER IS CAPABLE OF.
ITS NOT IN THE ENGLE BOOKS ITS A SPECIAL HI-PERF SBC CAM FOR PRO-STREET USE.

396muncie · 11-01-2007, 06:01 PM

Do you have the cam card with this? Any lifters to go with it? Are you flexible on the price at all? Thanks

BCOWANWHEELS · 11-01-2007, 07:47 PM

MAN I,AM TAKING a big hit as it is. 125.00 delivered is about giving it away. it was over 300.00 after shipping. no theres no lifters just a brand new cam.... and yes the cam card is with it from engle.
bob

BCOWANWHEELS · 11-02-2007, 01:21 PM

Ttt

396muncie · 11-02-2007, 07:02 PM

Well, if you get to the point where you'll take $100 shipped, let me know. Not trying to offend and if you can't go that low, no problem. Thanks

BCOWANWHEELS · 11-02-2007, 07:03 PM

i wont go that low and you wouldnt also. but thanks

BCOWANWHEELS · 11-28-2007, 04:47 PM

ttt

10-31-2007, 07:32 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Small Block New Thumper Camshaft I HAVE A BRAND NEW ENGLE HYDRAULIC HOT ROD CAMSHAFT. this has never been in a engine. its a maxed out hydraulic grind like for pro street performance etc. power band is from 2500-7000 rpm,s . its recomended for 10-1 compression and up. if you want a cam that racks off this is it. i paid almost 300.00 for this and i,ll sell it for 125.00 delivered. bob spec,s. in. 520 - exh. 537 lift in. 294 - exh.310 diration __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 12:18 AM.

10-31-2007, 10:43 PM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft ttt __________________ I BELIEVE IN JOHN 3:16

11-01-2007, 08:17 AM	#3
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft So this is an Engle cam, not a Comp Cams Thumpr cam, right? I couldn't find it on the Engle Cams website. What's the duration at .050 and the Lobe Seperation Angle(LSA)? Is it flat tappet or roller? Any part #? Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-01-2007, 12:49 PM	#4
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft grind number EP28/30-HYD, INTAKE OPEN @20 EX CLOSES @22, INT. CLOSES @48 EXH. OPENS @ 58, GROSS CAM LIFT INT. 347 & DUR.@.050 IS 248, GROSS CAM LIFT EXH IS 358 WITH DURATION 260 @.050. LOBE CENTERS 106 ITS A HYDRAULIC LIFTER CAM , BIG AS YOU CAN GET AND WHAT THE ANTI PUMPUP LIFTER IS CAPABLE OF. ITS NOT IN THE ENGLE BOOKS ITS A SPECIAL HI-PERF SBC CAM FOR PRO-STREET USE. __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 12:50 PM.

11-01-2007, 06:01 PM	#5
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft Do you have the cam card with this? Any lifters to go with it? Are you flexible on the price at all? Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-01-2007, 07:47 PM	#6
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft MAN I,AM TAKING a big hit as it is. 125.00 delivered is about giving it away. it was over 300.00 after shipping. no theres no lifters just a brand new cam.... and yes the cam card is with it from engle. bob __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 11-01-2007 at 07:48 PM.

11-02-2007, 01:21 PM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft Ttt __________________ I BELIEVE IN JOHN 3:16

11-02-2007, 07:02 PM	#8
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Small Block New Thumper Camshaft Well, if you get to the point where you'll take $100 shipped, let me know. Not trying to offend and if you can't go that low, no problem. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

11-02-2007, 07:03 PM	#9
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft i wont go that low and you wouldnt also. but thanks __________________ I BELIEVE IN JOHN 3:16

11-28-2007, 04:47 PM	#10
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Small Block New Thumper Camshaft ttt __________________ I BELIEVE IN JOHN 3:16



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.