|
|
|
11-18-2007, 09:28 PM
|
#1 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Tranny?
was driving home today , in my trusty ole 67 and my (3speed) trans starting making a weird noise ? while in 1st gear letting out on the clutch it makes a noise like something is hitting the bellhousing? and also does this in 2nd gear and i get a small vibration while in 2nd? when i shift to 3rd its as smooth as glass ..the noise goes away when the clutch is pushes in..i just put a clutch in it last year and i am pretty easy on it as far a burn outs or dumping it..goes...my step dad says its a throw out bearing...any help would be awsome.......tony
|
|
|
|
11-18-2007, 09:42 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Tranny?
I would look real hard at all the motor mounts
|
|
|
|
|
11-18-2007, 09:45 PM
|
#3 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Tranny?
will do Andy....<this would include the tranny mount also? would a throw out bearing make a noise? it may sound dumb but i swear it sounds like its coming from under the floor.....EDIT...may sound like im stupid but when i got my clutch kit from napa it didnt include a throw bearing ,and the truck only had 56,000 original so ,being it was my only D.D at the time i just put it all back together...it has 89,000 on it now...
Last edited by bad6772; 11-18-2007 at 09:47 PM. |
|
|
|
|
11-18-2007, 10:17 PM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Tranny?
shoulda got a pilot bearing too.
While it is probably the clutch or in the tranny its self.... a messed up mount (tranny mounts too) can make lotsa funny noises too. |
|
|
|
|
11-19-2007, 06:25 AM
|
#5 | |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Tranny?
Quote:
|
|
|
|
|
|
11-20-2007, 03:05 PM
|
#6 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Tranny?
well i checked the trans and engine mounts ? all look fine . so im back out to look at the fluid level and anything else i coulda missed...
|
|
|
|
|
11-20-2007, 04:27 PM
|
#7 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Tranny?
talkin to you on the phone now
 let us know what happens
|
|
|
|
|
11-21-2007, 07:53 AM
|
#8 |
|
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
Re: Tranny?
sounds to me like a problem in the bearings for the counter shaft. (it goes away when it is in 3rd)
|
|
|
|
|
11-21-2007, 02:43 PM
|
#9 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Tranny?
yeah its gone in third...so? talked to longhorn man last night and did his suggestions.. i cant find anything wrong outside.as far a mount or anything..so im thinking its internal.? i got some things working on a used one. a buddy of mine has a good 4spd that came out of an 82 1/2 ton..so im thinking i might go this route if i can...few questions... assuming they are the same length ? <i havent see it yet> can i used the same clutch and bellhouseing? also is the tranny crossmember the same? is this a common thing to change? 3sp to 4? i have heard that i will have to use the rear yoke from the 4 spd as the splines are differnt? andy help would be awsome......tony....
Edit: thanks Andy for letting me bug ya.......and calming me down a little the day before.... Last edited by bad6772; 11-21-2007 at 02:44 PM. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
