700r4 Up againist a 250 I6? Has anybody done this swap?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BarryB · 11-24-2007, 02:32 PM

Yeah has anybody on here done this swap in the trucks. I am probablly getting a 64 panel, straight 6 but three speed on column. I will be using this truck for hauling my tools around from job to job. And am needing it to get the best gas mileage possible. I have a 700 out in the garage so was thinking of putting it in there. What do you guys think????

**PICKMUP** · 11-24-2007, 02:42 PM

Yes. Cut the driveshaft, get the common changeover kits and hook up the carb/trans cables.
The hardest part may be working out the cables/linkage for the carb & trans. Lokar really helps.

PanelDeland · 11-24-2007, 03:47 PM

Keep me in the loop on what you learn.This is one of the mods I'm considering.

BarryB · 11-24-2007, 09:25 PM

For me it is going to be awhile before I tear into this swap. But if there is a link out there to help with this thread. Maybe somebody will post it.

**Boog** · 11-24-2007, 10:10 PM

I am not 100% sure but I think the 6 cylinders use a different torque converter than the V8s. In case your 700R was behind a V8.

BarryB · 11-28-2007, 09:35 PM

Quote:

Originally Posted by Boog

I am not 100% sure but I think the 6 cylinders use a different torque converter than the V8s. In case your 700R was behind a V8.

Yes mine was behind a V8 now this has me thinking, any other concerns I wonder?? And bump hoping to get some more/good info before i do this swap.

RJGeister · 11-28-2007, 10:37 PM

Barry,
www.inliners.org has some info on that swap. Look under drivetrain. I have been researching that swap myself. I also have an I6 with a 3 speed. Lots of info to digest before making the leap. It's a toss up for me. 200r4 goes in the a TH350 with minimal mods. 700r4 has more mods to do but is suppose to be the stronger of the two. I guess it all goes to preference and $$$$. My .02.

Rich

11-24-2007, 02:32 PM	#1
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	700r4 Up againist a 250 I6? Has anybody done this swap?? Yeah has anybody on here done this swap in the trucks. I am probablly getting a 64 panel, straight 6 but three speed on column. I will be using this truck for hauling my tools around from job to job. And am needing it to get the best gas mileage possible. I have a 700 out in the garage so was thinking of putting it in there. What do you guys think???? __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

11-24-2007, 02:42 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: 700r4 Up againist a 250 I6? Has anybody done this swap?? Yes. Cut the driveshaft, get the common changeover kits and hook up the carb/trans cables. The hardest part may be working out the cables/linkage for the carb & trans. Lokar really helps.

11-24-2007, 03:47 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: 700r4 Up againist a 250 I6? Has anybody done this swap?? Keep me in the loop on what you learn.This is one of the mods I'm considering. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 11-24-2007 at 03:48 PM.

11-24-2007, 09:25 PM	#4
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 700r4 Up againist a 250 I6? Has anybody done this swap?? For me it is going to be awhile before I tear into this swap. But if there is a link out there to help with this thread. Maybe somebody will post it. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

11-24-2007, 10:10 PM	#5
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: 700r4 Up againist a 250 I6? Has anybody done this swap?? I am not 100% sure but I think the 6 cylinders use a different torque converter than the V8s. In case your 700R was behind a V8. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-28-2007, 10:37 PM	#7
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 700r4 Up againist a 250 I6? Has anybody done this swap?? Barry, www.inliners.org has some info on that swap. Look under drivetrain. I have been researching that swap myself. I also have an I6 with a 3 speed. Lots of info to digest before making the leap. It's a toss up for me. 200r4 goes in the a TH350 with minimal mods. 700r4 has more mods to do but is suppose to be the stronger of the two. I guess it all goes to preference and $$$$. My .02. Rich



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.