what is your thanksgiving day project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sodak69c10 · 11-24-2007, 03:55 PM

mine was pulling the old M-21 Muncie from little blue and got ready to tear it apart and rebuild it. it was nice i just laid on the ground and unbolted it and lifted it out by hand

by the way any body know what speedo gear to use with 3.73 rear, and a 0-100 speedometer

sodak69c10 · 11-24-2007, 04:14 PM

oh and i wanted to add that i fired it up for a while,after sitting for 3 months it fired right up, even in its half disassembled state it looked cool running like that,

clemson71guy · 11-24-2007, 04:21 PM

mine was to put the weather stripping on my truck!

Rokcrln · 11-24-2007, 04:35 PM

Mine is to spend time with the family. I am out at the inlaws with my wife and son (and dog). I might pull my 67 SS396 chevelle out for a run (I keep it here so it stays nice and I put less miles on it this way). I just got back from a walk with my son around the block at my inlaws and saw a great car sitting in a garage. An original 67 SHELBY GT fast back! I talked with the wife and she said it was her husbands 16th Birthday present.

I will be back home Friday and finish getting the shop cleaned up for the return of "Trazer" on Saturday from the blasters. Then after that I need to run down to the bay area to pick a new toy for me, a 63 SWB GMC that was offered to me just yesterday for a steal. Then Sunday I have not yet figured that out. Might start back on the Trazer.
Kevin
LFD Inc.

dastuck · 11-24-2007, 04:26 PM

I got up this morning and headed into the woods to do a little bow hunting in the 18 degree F. weather. Had a shot at a really nice 9 point, but i didnt see the small twig between me and him but my arrow found it. 20 yards broadside and my arrow hit the branch and went flying into the ground behind the deer. Luckily it didnt spook him to bad and he just walked off. Im getting ready to head back out to give it another try. I did gourge myself today until i could barely walk, and get a few pics of my 72 c10 frame i just finished spraying yesterday and post those pics on my thread.

49m · 11-24-2007, 04:33 PM

To paint a farmall cub tractor I have. Im fixing it to sell.

cruiserman · 11-24-2007, 04:58 PM

Replace the primary rods in my Qjet. To gorge myself on turkey.

tcb-1 · 11-24-2007, 05:17 PM

eat, nap, repeat

72BLUZ · 11-24-2007, 05:56 PM

Mine Was Eating Ham, Cajun Deep Fried Turkey, Regular Deep Fried Turkey, Green Beans, Sweet Tea W/splenda. And Feeding The Same To My 1 Year Old Grandson. But Not In That Exact Order. Because Caden "the Grandson" Wanted His Bites First!!!

19673ontree · 11-24-2007, 06:20 PM

trying to build some extra table muscle for christmas .

mothertrucker424 · 11-24-2007, 06:21 PM

ordered parts and i finished my shop and gonna get ready for turkey rod run

**Palf70Step** · 11-24-2007, 07:42 PM

Drive to mother-inlaws, Eat, drive home...Surf the board.

Not sure about the rest of the weekend. Probably not a whole lot of truck stuff as I am still getting over a lung infection. Saturday will be yank th tree and decorations down from attic ans get things ready for mom and kids to work on.

hdflstf · 11-24-2007, 07:53 PM

Replaced the second broken motor mount. Both are now in and torqued. Fluid in the front diff. Power steering hose in and tight. Fluid in the power steering now. Scraped most of the muck off the transfer case so it can go on the workbench tomorrow for new seals, bearings, and a general inspection.

Time for dinner.. Lobster salad with a citrus tarragon dressing and grilled chilean sea bass with a lobster stock white wine cream sauce. Also, areally good chardonnay to wash it down.

**70cst** · 11-24-2007, 07:57 PM

Drill new belt holes in my belt. If I keep eating like this I'm going to have extend my seat belt in the Green Machine.

**Boog** · 11-24-2007, 07:56 PM

Eat, sleep, surf the boards. Enjoy being here with my wife. Sunshine and in the mid 50's.

lowrollin70gmc · 11-24-2007, 08:23 PM

Go to Grandma's and eat food, get sent home with food, and work the rest of the weekend.

Plans got modified when a Subaru pulled in front of my Cobalt and I hit him with my front corner. Didn't look bad until you pop the hood and the headlight, headlight bracket, grill, bumper support and many other parts are crushed. I now have a custom bungi cord holding my headlight on. And that headlight's only 3 weeks old! (Warranty replacement). So now I get to research what I'm going to do.

But I have a fridge full of food.

**FRENCHBLUE72** · 11-24-2007, 08:25 PM

Eat AT THE INLAWS and get my build thread posted and I managed to get both of those done so I may head out to the shop to work on my junk...Looks like its gonna get down to 22 tonight so I better get the coffee ready..

PanelDeland · 11-24-2007, 10:35 PM

Eat,surf the net and eat some more.Now Fri.Mrs.P has to work and I'm off,so if the weather stays like it was today I will do some stuff in the garage and sand the inner fenderwells.If not I am also doing a redecorating project in my home office and may do some in here.Sat and Sun will be replays of Fri,though I may make a run to HF,NT,or B&N.

11-24-2007, 03:55 PM	#1
sodak69c10 Registered User Join Date: Mar 2007 Location: Rapid City, South Dakota Posts: 285	what is your thanksgiving day project mine was pulling the old M-21 Muncie from little blue and got ready to tear it apart and rebuild it. it was nice i just laid on the ground and unbolted it and lifted it out by hand by the way any body know what speedo gear to use with 3.73 rear, and a 0-100 speedometer __________________ ,Clint LOUD PIPES SAVE LIVES 69 C-10 short stepside 406 sbc, 02 YAMAHA WR250F, 07 SUZUKI SV650S, 81 Grand Prix 355 sbc, 81 XT 500 YAMAHA Last edited by sodak69c10; 11-24-2007 at 03:56 PM.

11-24-2007, 04:14 PM	#2
sodak69c10 Registered User Join Date: Mar 2007 Location: Rapid City, South Dakota Posts: 285	Re: what is your thanksgiving day project oh and i wanted to add that i fired it up for a while,after sitting for 3 months it fired right up, even in its half disassembled state it looked cool running like that, __________________ ,Clint LOUD PIPES SAVE LIVES 69 C-10 short stepside 406 sbc, 02 YAMAHA WR250F, 07 SUZUKI SV650S, 81 Grand Prix 355 sbc, 81 XT 500 YAMAHA Last edited by sodak69c10; 11-24-2007 at 04:15 PM.

11-24-2007, 04:21 PM	#3
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: what is your thanksgiving day project mine was to put the weather stripping on my truck!

11-24-2007, 04:35 PM	#4
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: what is your thanksgiving day project Mine is to spend time with the family. I am out at the inlaws with my wife and son (and dog). I might pull my 67 SS396 chevelle out for a run (I keep it here so it stays nice and I put less miles on it this way). I just got back from a walk with my son around the block at my inlaws and saw a great car sitting in a garage. An original 67 SHELBY GT fast back! I talked with the wife and she said it was her husbands 16th Birthday present. I will be back home Friday and finish getting the shop cleaned up for the return of "Trazer" on Saturday from the blasters. Then after that I need to run down to the bay area to pick a new toy for me, a 63 SWB GMC that was offered to me just yesterday for a steal. Then Sunday I have not yet figured that out. Might start back on the Trazer. Kevin LFD Inc.

11-24-2007, 04:26 PM	#5
dastuck Registered User Join Date: Sep 2007 Location: melvern, ks Posts: 71	Re: what is your thanksgiving day project I got up this morning and headed into the woods to do a little bow hunting in the 18 degree F. weather. Had a shot at a really nice 9 point, but i didnt see the small twig between me and him but my arrow found it. 20 yards broadside and my arrow hit the branch and went flying into the ground behind the deer. Luckily it didnt spook him to bad and he just walked off. Im getting ready to head back out to give it another try. I did gourge myself today until i could barely walk, and get a few pics of my 72 c10 frame i just finished spraying yesterday and post those pics on my thread.

11-24-2007, 04:33 PM	#6
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: what is your thanksgiving day project To paint a farmall cub tractor I have. Im fixing it to sell. __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

11-24-2007, 04:58 PM	#7
cruiserman Registered User Join Date: Dec 2006 Location: Idaho Posts: 210	Re: what is your thanksgiving day project Replace the primary rods in my Qjet. To gorge myself on turkey. __________________ 72 C2500 LWB 402 Sierra Grande 05 Odyssey 08 Tundra

11-24-2007, 05:17 PM	#8
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: what is your thanksgiving day project eat, nap, repeat

11-24-2007, 05:56 PM	#9
72BLUZ Registered User Join Date: Nov 2006 Location: lafayette, ga. Posts: 832	Re: what is your thanksgiving day project Mine Was Eating Ham, Cajun Deep Fried Turkey, Regular Deep Fried Turkey, Green Beans, Sweet Tea W/splenda. And Feeding The Same To My 1 Year Old Grandson. But Not In That Exact Order. Because Caden "the Grandson" Wanted His Bites First!!! __________________ Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.... Ronald Reagan

11-24-2007, 06:20 PM	#10
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: what is your thanksgiving day project trying to build some extra table muscle for christmas . __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

11-24-2007, 06:21 PM	#11
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	Re: what is your thanksgiving day project ordered parts and i finished my shop and gonna get ready for turkey rod run

11-24-2007, 07:42 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,820	Re: what is your thanksgiving day project Drive to mother-inlaws, Eat, drive home...Surf the board. Not sure about the rest of the weekend. Probably not a whole lot of truck stuff as I am still getting over a lung infection. Saturday will be yank th tree and decorations down from attic ans get things ready for mom and kids to work on. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-24-2007, 07:53 PM	#13
hdflstf Registered User Join Date: Oct 2007 Location: Desert Southwest Posts: 540	Re: what is your thanksgiving day project Replaced the second broken motor mount. Both are now in and torqued. Fluid in the front diff. Power steering hose in and tight. Fluid in the power steering now. Scraped most of the muck off the transfer case so it can go on the workbench tomorrow for new seals, bearings, and a general inspection. Time for dinner.. Lobster salad with a citrus tarragon dressing and grilled chilean sea bass with a lobster stock white wine cream sauce. Also, areally good chardonnay to wash it down.

11-24-2007, 07:57 PM	#14
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: what is your thanksgiving day project Drill new belt holes in my belt. If I keep eating like this I'm going to have extend my seat belt in the Green Machine. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 11-24-2007 at 07:58 PM.

11-24-2007, 07:56 PM	#15
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,141	Re: what is your thanksgiving day project Eat, sleep, surf the boards. Enjoy being here with my wife. Sunshine and in the mid 50's. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

11-24-2007, 08:23 PM	#16
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: what is your thanksgiving day project Go to Grandma's and eat food, get sent home with food, and work the rest of the weekend. Plans got modified when a Subaru pulled in front of my Cobalt and I hit him with my front corner. Didn't look bad until you pop the hood and the headlight, headlight bracket, grill, bumper support and many other parts are crushed. I now have a custom bungi cord holding my headlight on. And that headlight's only 3 weeks old! (Warranty replacement). So now I get to research what I'm going to do. But I have a fridge full of food. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

11-24-2007, 08:25 PM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: what is your thanksgiving day project Eat AT THE INLAWS and get my build thread posted and I managed to get both of those done so I may head out to the shop to work on my junk...Looks like its gonna get down to 22 tonight so I better get the coffee ready.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 10:35 PM	#18
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: what is your thanksgiving day project Eat,surf the net and eat some more.Now Fri.Mrs.P has to work and I'm off,so if the weather stays like it was today I will do some stuff in the garage and sand the inner fenderwells.If not I am also doing a redecorating project in my home office and may do some in here.Sat and Sun will be replays of Fri,though I may make a run to HF,NT,or B&N. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

Register or Log In To remove these advertisements.