Piant & body work has begun. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 12-05-2007, 12:34 PM

While customer projects are out of the shop last week, I decided to make some progress on the Blazer. Filled minor pitting in floor and other areas will ALL-METAL. That will outlast the truck. Got the firewall, kick panels, and the bedsides pretty straight. Already applied 2 coats of high build 2K urethane and ready to block with 220. Waiting on the doors to be hung to finish blocking the bedsides with the doors. Pictures just don't show the man hours required to get one straight during the stage of the build, but here are a few.

MiniD · 12-05-2007, 01:57 PM

Has begun? It looks pretty well under way! What are you planning to do for the fuel filler and heater?

Musclerodz · 12-05-2007, 04:48 PM

Quote:

Originally Posted by MiniD

Has begun? It looks pretty well under way! What are you planning to do for the fuel filler and heater?

Fuel fill i am either going to install a door out of a 88-98 truck or a flip down tail light. That is still up in the air. Truck is getting a Vintage Air unit, so all that is needed there is the firewall bulkhead for the lines.

Mike

Rokcrln · 12-05-2007, 07:02 PM

Yep I know what you mean about the amount hours not showing. I do this stuff as well so I know you have atleast 15-20hrs so far into this build

No really it is looking great, mine is still in the side yard getting pee'd on by my guard dog

As for the bulk head fitting check out what I did on Lemon Drop. It pops out thru the side kick panel vent then will run up the inner fender behind the fender it self for a real clean hidden look.

Keep them pics comming.

Kevin
LFD Inc.

Musclerodz · 12-07-2007, 07:41 PM

Quote:

Originally Posted by Rokcrln

Yep I know what you mean about the amount hours not showing. I do this stuff as well so I know you have atleast 15-20hrs so far into this build

No really it is looking great, mine is still in the side yard getting pee'd on by my guard dog

As for the bulk head fitting check out what I did on Lemon Drop. It pops out thru the side kick panel vent then will run up the inner fender behind the fender it self for a real clean hidden look.

Keep them pics comming.

Kevin
LFD Inc.

That will be an SOB to hook up those lines on the inside the first time. Haven't decided yet where I am going to put it yet, That will be decided once I mount the body to the frame.

I looked at the time sheet the other day on the tub. Unfortunatley i did not keep track of the chassis, but I have about 80 hours in the tub (including metal repair) and probably another 100 before it is ready for paint.

Mike

Rokcrln · 12-07-2007, 08:37 PM

Quote:

Originally Posted by Musclerodz

I looked at the time sheet the other day on the tub. Unfortunatley i did not keep track of the chassis, but I have about 80 hours in the tub (including metal repair) and probably another 100 before it is ready for paint.

Mike

That sounds good to me! I am figuring about 150-250 in body repair and body mods then another 80-140 for paint prep. I dont even want to think about cut and color right now because it will be all surfaces

Well I might cheap out on the cut/color for the bottom, my new Sata guns should lay that down good enough to drop 5" off the ground for ride height

So what are you plans for color's?

Kevin
LFD inc.

72BlckButy · 12-05-2007, 02:09 PM

Looks great so far!

lyrikz · 12-05-2007, 06:56 PM

Quote:

Originally Posted by Musclerodz

While customer projects are out of the shop last week, I decided to make some progress on the Blazer. Filled minor pitting in floor and other areas will ALL-METAL. That will outlast the truck. Got the firewall, kick panels, and the bedsides pretty straight. Already applied 2 coats of high build 2K urethane and ready to block with 220. Waiting on the doors to be hung to finish blocking the bedsides with the doors. Pictures just don't show the man hours required to get one straight during the stage of the build, but here are a few.

What is this ALL METAL that you speak off. Links?

Musclerodz · 12-07-2007, 07:36 PM

Quote:

Originally Posted by lyrikz

What is this ALL METAL that you speak off. Links?

All-Metal is a aluminum based filler that will not shrink and is as stable as the metal. It can be machined, and threaded, seen it done. I used it to fill any pitting I had left and any spots deeper than 1/16th inch that needed filled.

Mike

vtblazer · 12-08-2007, 06:59 AM

Quote:

Originally Posted by Musclerodz

Pictures just don't show the man hours required to get one straight during the stage of the build, but here are a few.

Great progress and yes, the hours do show.

We have a K5 tub in the shop right now also, pretty good all considered but the customer wanted all the holes filled (carpet strip/trim etc) that won't be needed for his intended build.
All good but it turned out there where 116 of em in total!

That's not counting the pass. side aux fuel filler hole that needed patching.

LUV2XCLR8 · 12-08-2007, 05:08 PM

Nice

**FRENCHBLUE72** · 12-09-2007, 06:34 PM

Very nice looking and hell ya the hours show...

Big J · 03-25-2008, 11:56 PM

Whats the word on this one???

Musclerodz · 03-27-2008, 06:44 AM

Winter and a customers '57 Chevy put it on the back burner the last couple months. Been waiting on the doors and tailgate to get repaired. Those got repaired last week and picking them up tommorrow. Tub has been near ready for color for a month or so. Have new Tri-Plus fenders and hood here waiting for mock up. Got another couple weeks to go on the '57, so watch for updates coming next month.

12-05-2007, 12:34 PM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Piant & body work has begun. While customer projects are out of the shop last week, I decided to make some progress on the Blazer. Filled minor pitting in floor and other areas will ALL-METAL. That will outlast the truck. Got the firewall, kick panels, and the bedsides pretty straight. Already applied 2 coats of high build 2K urethane and ready to block with 220. Waiting on the doors to be hung to finish blocking the bedsides with the doors. Pictures just don't show the man hours required to get one straight during the stage of the build, but here are a few. Attached Images __________________ Mike Redpath

12-05-2007, 01:57 PM	#2
MiniD Registered User Join Date: Mar 2007 Location: Portland, OR Posts: 108	Re: Piant & body work has begun. Has begun? It looks pretty well under way! What are you planning to do for the fuel filler and heater?

12-05-2007, 07:02 PM	#4
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Piant & body work has begun. Yep I know what you mean about the amount hours not showing. I do this stuff as well so I know you have atleast 15-20hrs so far into this build No really it is looking great, mine is still in the side yard getting pee'd on by my guard dog As for the bulk head fitting check out what I did on Lemon Drop. It pops out thru the side kick panel vent then will run up the inner fender behind the fender it self for a real clean hidden look. Keep them pics comming. Kevin LFD Inc. Attached Images

12-05-2007, 02:09 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Piant & body work has begun. Looks great so far! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-08-2007, 05:08 PM	#11
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	Re: Piant & body work has begun. Nice __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-09-2007, 06:34 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: Piant & body work has begun. Very nice looking and hell ya the hours show... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-25-2008, 11:56 PM	#13
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Piant & body work has begun. Whats the word on this one??? __________________ BAZINGA! My Build

03-27-2008, 06:44 AM	#14
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Piant & body work has begun. Winter and a customers '57 Chevy put it on the back burner the last couple months. Been waiting on the doors and tailgate to get repaired. Those got repaired last week and picking them up tommorrow. Tub has been near ready for color for a month or so. Have new Tri-Plus fenders and hood here waiting for mock up. Got another couple weeks to go on the '57, so watch for updates coming next month. __________________ Mike Redpath



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.