Help, Need a 67-68 Buddy Bucket Material Sample - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huskerboy2 · 12-06-2007, 04:40 PM

Guys:

Does anybody have a set of trashed buddy buckets that they would be willing to cut me a small sample of the insert material. The buckets I'm talking about are like the picture below. The kind with the insert in them. I need the sample from the insert portion. I'm looking at having the material reproduced for my truck seat and I need to know what the spacing is on the pleats, etc. Color doesn't matter. Thanks guys.

**john** · 12-06-2007, 06:50 PM

You might try this place. They have most of the old stuff, and they send samples.

http://www.smsautofabrics.com/?gclid...FRfOggodXwhGaQ

Huskerboy2 · 12-06-2007, 10:22 PM

Thanks John. They are actually the ones making the material for me and they are requesting the sample. T

stllookn · 12-06-2007, 11:40 PM

What are they going to charge you? They do awesome work! I've got a section I can send them. I will be out of town for the rest of the week and can send it to them on Monday. I have their address but it should be sent to someone's attention.

Husker · 12-06-2007, 11:42 PM

So is this what a set of buddy buckets look like? The regular buckets would have a console and not the back pad shown in the middle?
Thanks
Ron

**67 cst swb** · 12-06-2007, 11:52 PM

I have a set of 67 buddy buckets. they are very trashed. I will see them Sat afternoon. I will get you a sample. how many different styles did they have in '67... Mine are blue... I don't remember an insert, unless I don't remember due to the insert is the same color as the rest of the seat.
I'll look Saturday...

Huskerboy2 · 12-07-2007, 12:09 PM

stllookn, here's what they quoted me for material. $79 per yard for the correct fawn colored material with the heat pressed lines in it. $49 per yard for the correct fawn material with no lines, for the sides and back of the seats. They said that I would need about 1 1/2 yards of the heat pressed material and about 2 1/2 yards of the plain material. That's just for the seats, console, etc.

Basically, I'm having them make three fabrics. First, the plain material in the fawn color. Second, the heat pressed material, wide, like what came on the door panels. Third, the heat pressed material, narrow, that would have come on the inserts in the pics above.

I need someone to send the sample to me so I can package it up with the other samples and submit it with my request to the contact person I spoke with.

Huskerboy2 · 12-07-2007, 12:27 PM

Basically, there were two types of seat patterns for 67 and 68 buddy buckets. There is the wide heat pressed and the narrow heat pressed, which was in an insert in the seats. I believe the wide heat pressed were for '67 and the narrow were for '68. I can't ever keep that straight, so somebody correct me if I'm wrong. See the pics below for the two types. I need the sample from the narrow lined insert.

**special-K** · 12-07-2007, 12:25 PM

I`d be real interested to see how these turn out.NICE!!

Huskerboy2 · 12-07-2007, 12:29 PM

67 cst swb, if your seats are out of a '67, they are probably the wide heat pressed pattern. If they are the narrow, however, I would really appreciate it if you could send me a sample. I've already got the sample for the wide pattern from the set that I am going to have recovered.

**67 cst swb** · 12-07-2007, 11:04 PM

Quote:

Originally Posted by Huskerboy2

67 cst swb, if your seats are out of a '67, they are probably the wide heat pressed pattern. If they are the narrow, however, I would really appreciate it if you could send me a sample. I've already got the sample for the wide pattern from the set that I am going to have recovered.

Mine are the original 67 seats in my 67 CST. So they are probably the wide.

leadfoot067 · 12-08-2007, 12:42 AM

i have 2 sets of 67 seats both had the wide pattern...

Huskerboy2 · 12-07-2007, 12:31 PM

When I get the fabric made and receive it, I'll post the part number or whatever info anyone would need to order the three styles of material in fawn from SMS.

Huskerboy2 · 12-07-2007, 10:43 PM

ttt

Huskerboy2 · 12-08-2007, 02:21 PM

Anybody with a trashed set of '68's that can send me a small piece of the material. I'll buy it, pay the shipping, whatever...

68caliRat · 12-09-2007, 09:42 PM

Quote:

Originally Posted by Huskerboy2

Anybody with a trashed set of '68's that can send me a small piece of the material. I'll buy it, pay the shipping, whatever...

I have a 68 GMC with trashed buddy buckets. I'll send you a sample. send me a PM with your Address. Mine look just like your first pic. Just a different color so should be the same, no? BTW my seats have the inserts in the seat as well as the back, and yes it's the original upholstery.

Huskerboy2 · 12-09-2007, 09:18 PM

ttt

Huskerboy2 · 12-10-2007, 09:01 AM

Much appreciated 68caliRat. PM Sent.

**67 cst swb** · 12-11-2007, 08:42 PM

Well, mine were like the first picture in post #9...
Sorry...

Huskerboy2 · 12-12-2007, 02:32 PM

Thanks 67 cst swb. Hopefully 68CaliRat has me covered.

Huskerboy2 · 01-04-2008, 12:00 PM

Well, I just placed an order with SMS Auto Fabrics for my fawn material.

A HUGE thanks to 68CaliRat for providing me with the sample of the seat insert material. Let me know if I can ever return the favor.

Now, for the bad part....the prices. There were three types of material. The plain vinyl and the narrow heat pressed vinyl for the seats, plus, the wider heat pressed vinyl for the door panels and a headliner (even though it isn't stock, I'm putting a headliner in this truck).

The total bill is going to be just under $500 for the material. That's for enough material to do the buddy bucket seats, door panels and the headliner. They are going to actually stamp the headliner, so it will have that border around it, like factory.

I guess when you add up a new aftermarket seat cover, door panel covers and a headliner, that would run you $450 or so. Really, the only additional cost is going to be having the covers sewn. I've got a good guy for that who is doing it at a really reasonable price for me.

I'll let you guys know when I receive the material. They are going to start on it next week, so I will have this stuff in a couple of weeks. I'll post part numbers, etc. in case anyone wants to order. Some of you fawn interior guys may especially want that headliner.

Thanks again to everybody.

noahdallas · 01-04-2008, 12:27 PM

Hi everyone ... I dont want to hijack this thread but.... can anyone please show me a pic of how the middle seat attaches to the frame? thanks in advance....

**Hart_Rod** · 01-04-2008, 05:26 PM

Quote:

Originally Posted by noahdallas

Hi everyone ... I dont want to hijack this thread but.... can anyone please show me a pic of how the middle seat attaches to the frame? thanks in advance....

Here ya go.....

noahdallas · 02-29-2008, 07:23 AM

Quote:

Originally Posted by Hart_Rod

Here ya go.....

Can anyone tell me where to get these 4 clips for the middle seat? thanks...

Huskerboy2 · 01-04-2008, 05:12 PM

There are four c-shaped brackets that bolt through the bottom of the console. The brackets curl around the frame and hold the middle seat in place.

12-06-2007, 04:40 PM	#1
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Help, Need a 67-68 Buddy Bucket Material Sample Guys: Does anybody have a set of trashed buddy buckets that they would be willing to cut me a small sample of the insert material. The buckets I'm talking about are like the picture below. The kind with the insert in them. I need the sample from the insert portion. I'm looking at having the material reproduced for my truck seat and I need to know what the spacing is on the pleats, etc. Color doesn't matter. Thanks guys. Attached Images __________________ '72 Chevy Blazer

12-06-2007, 06:50 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Help, Need a 67-68 Buddy Bucket Material Sample You might try this place. They have most of the old stuff, and they send samples. http://www.smsautofabrics.com/?gclid...FRfOggodXwhGaQ __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

12-06-2007, 10:22 PM	#3
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Thanks John. They are actually the ones making the material for me and they are requesting the sample. T __________________ '72 Chevy Blazer

12-06-2007, 11:40 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Help, Need a 67-68 Buddy Bucket Material Sample What are they going to charge you? They do awesome work! I've got a section I can send them. I will be out of town for the rest of the week and can send it to them on Monday. I have their address but it should be sent to someone's attention. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 12-06-2007 at 11:40 PM.

12-06-2007, 11:42 PM	#5
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Help, Need a 67-68 Buddy Bucket Material Sample So is this what a set of buddy buckets look like? The regular buckets would have a console and not the back pad shown in the middle? Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

12-06-2007, 11:52 PM	#6
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Help, Need a 67-68 Buddy Bucket Material Sample I have a set of 67 buddy buckets. they are very trashed. I will see them Sat afternoon. I will get you a sample. how many different styles did they have in '67... Mine are blue... I don't remember an insert, unless I don't remember due to the insert is the same color as the rest of the seat. I'll look Saturday... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

12-07-2007, 12:09 PM	#7
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample stllookn, here's what they quoted me for material. $79 per yard for the correct fawn colored material with the heat pressed lines in it. $49 per yard for the correct fawn material with no lines, for the sides and back of the seats. They said that I would need about 1 1/2 yards of the heat pressed material and about 2 1/2 yards of the plain material. That's just for the seats, console, etc. Basically, I'm having them make three fabrics. First, the plain material in the fawn color. Second, the heat pressed material, wide, like what came on the door panels. Third, the heat pressed material, narrow, that would have come on the inserts in the pics above. I need someone to send the sample to me so I can package it up with the other samples and submit it with my request to the contact person I spoke with. __________________ '72 Chevy Blazer

12-07-2007, 12:27 PM	#8
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Basically, there were two types of seat patterns for 67 and 68 buddy buckets. There is the wide heat pressed and the narrow heat pressed, which was in an insert in the seats. I believe the wide heat pressed were for '67 and the narrow were for '68. I can't ever keep that straight, so somebody correct me if I'm wrong. See the pics below for the two types. I need the sample from the narrow lined insert. Attached Images __________________ '72 Chevy Blazer

12-07-2007, 12:25 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Help, Need a 67-68 Buddy Bucket Material Sample I`d be real interested to see how these turn out.NICE!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-07-2007, 12:29 PM	#10
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample 67 cst swb, if your seats are out of a '67, they are probably the wide heat pressed pattern. If they are the narrow, however, I would really appreciate it if you could send me a sample. I've already got the sample for the wide pattern from the set that I am going to have recovered. __________________ '72 Chevy Blazer

12-08-2007, 12:42 AM	#12
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	Re: Help, Need a 67-68 Buddy Bucket Material Sample i have 2 sets of 67 seats both had the wide pattern... __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

12-07-2007, 12:31 PM	#13
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample When I get the fabric made and receive it, I'll post the part number or whatever info anyone would need to order the three styles of material in fawn from SMS. __________________ '72 Chevy Blazer

12-07-2007, 10:43 PM	#14
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample ttt __________________ '72 Chevy Blazer

12-08-2007, 02:21 PM	#15
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Anybody with a trashed set of '68's that can send me a small piece of the material. I'll buy it, pay the shipping, whatever... __________________ '72 Chevy Blazer

12-09-2007, 09:18 PM	#17
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample ttt __________________ '72 Chevy Blazer



Register or Log In To remove these advertisements.

12-10-2007, 09:01 AM	#18
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Much appreciated 68caliRat. PM Sent. __________________ '72 Chevy Blazer

12-11-2007, 08:42 PM	#19
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Help, Need a 67-68 Buddy Bucket Material Sample Well, mine were like the first picture in post #9... Sorry... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

12-12-2007, 02:32 PM	#20
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Thanks 67 cst swb. Hopefully 68CaliRat has me covered. __________________ '72 Chevy Blazer

01-04-2008, 12:00 PM	#21
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample Well, I just placed an order with SMS Auto Fabrics for my fawn material. A HUGE thanks to 68CaliRat for providing me with the sample of the seat insert material. Let me know if I can ever return the favor. Now, for the bad part....the prices. There were three types of material. The plain vinyl and the narrow heat pressed vinyl for the seats, plus, the wider heat pressed vinyl for the door panels and a headliner (even though it isn't stock, I'm putting a headliner in this truck). The total bill is going to be just under $500 for the material. That's for enough material to do the buddy bucket seats, door panels and the headliner. They are going to actually stamp the headliner, so it will have that border around it, like factory. I guess when you add up a new aftermarket seat cover, door panel covers and a headliner, that would run you $450 or so. Really, the only additional cost is going to be having the covers sewn. I've got a good guy for that who is doing it at a really reasonable price for me. I'll let you guys know when I receive the material. They are going to start on it next week, so I will have this stuff in a couple of weeks. I'll post part numbers, etc. in case anyone wants to order. Some of you fawn interior guys may especially want that headliner. Thanks again to everybody. __________________ '72 Chevy Blazer

01-04-2008, 12:27 PM	#22
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Help, Need a 67-68 Buddy Bucket Material Sample Hi everyone ... I dont want to hijack this thread but.... can anyone please show me a pic of how the middle seat attaches to the frame? thanks in advance....

01-04-2008, 05:12 PM	#25
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Help, Need a 67-68 Buddy Bucket Material Sample There are four c-shaped brackets that bolt through the bottom of the console. The brackets curl around the frame and hold the middle seat in place. __________________ '72 Chevy Blazer

Register or Log In To remove these advertisements.