? about GMCPaul - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jay_shy · 12-15-2007, 02:09 PM

I had emailed Paul about some parts on 11-20-07 and he replied 11-24-07 and mentioned about getting back to me. Since then I have not heard from him. I tried to contact him through email several times since then and have had not luck getting a reply.

Does anybody know the best way to contact him?

Thanks
Jason

shifty · 12-15-2007, 02:18 PM

I've never had a lot of issues, but I remember someone mentioning something going on (either personal or business-wise) that may lead to slowdowns. Was it an ice storm or something? I forget.

Personally, when I need to talk to anyone I'm shopping with online, I will call the place directly. I would use the phone numbers listed at the site, myself. I rarely communicate and do business via email.

**truckdude239** · 12-15-2007, 03:49 PM

paul is a great guy call him at the number listed on his site i've bought parts from he a few times good guy to deal with

WHYBYNU · 12-15-2007, 05:26 PM

I have bought from him for years. Always A+ service Call his number 765-569-2906. He is 2nd to none when it comes to these trucks and the parts he sells.

JOHN

jay_shy · 12-15-2007, 05:32 PM

I have never heard anything negative about GMCPaul. I will try to give him a call tomorrow as I am not sure how often he checks his email. I also heard about some flooding in the area he is located in.

Jason

bad6772 · 12-15-2007, 05:44 PM

lately you dont deal with paul....

jay_shy · 12-15-2007, 05:49 PM

Bad6772 - what do you mean by that.

Jason

geoman · 12-15-2007, 05:51 PM

I read on here he became a grandpa recently. Give him a call in the a.m. Good luck!

bad6772 · 12-15-2007, 06:03 PM

id rather not bash anyone here...plus i dont think its permitted here...

TotalChevy1 · 12-16-2007, 05:47 AM

I think do to their size, you may run into some delays, but i just ordered a ton of stuff and most of it came within two weeks. I still have a few back orders but that's expects on some stuff. I think they are one of the better venders

Olden Days · 12-16-2007, 06:47 AM

I dont know why your even asking. all that time without a response? move on to the the next vendor. There are plenty of them that want your business.
That is not meant as a slam, or anything personal... just business

**fine69** · 12-16-2007, 07:56 AM

Yea, what OldenDays said......

90\87Formula · 12-16-2007, 08:24 AM

Here's a little more info in this post:
http://67-72chevytrucks.com/vboard/s...d.php?t=263843

jb4short · 12-16-2007, 08:56 AM

I've heard nothing but good things about GMC Paul. Occasionally there are circumstances beyond anyone's control (IE; I got a PC virus and had to reformat a drive that had my stored e-mail on it....I lost record of mail that I had to respond to). Give him the benefit of the doubt and try again by phone.

**Classic Heartbeat** · 12-16-2007, 09:37 AM

Paul is strait up!! I have known him for 8 years and he treats his clientell like family. You will have no worries with him. WES

bad6772 · 12-16-2007, 02:02 PM

lately you do not deal with paul..period...trust me...i know i have always dealt with him.. for the last 10 years and i dont want to bash....but i placed an order and was told 600 dollars worth of parts were waiting on me...so i took the 3.5 hour drive to pick up the parts that were waiting on me....well None of the parts were there.. NONE this is after 5 confirmed emails and personal numbers given to me.....i then decided to order again and have the parts shipped to me...even though i could have just done that from my house...well it came time to pay and i did not have any small bills....and they did not either....so for 8 dollars they lost a 600 sale......i even agreed to pay for shipping.....?

moderators i am not trying to break any rules.....nor bash......

edit....this dealing was not with paul himself....but its still his company

1971ChevyTruck · 12-16-2007, 06:35 PM

I don't want to bash on the guy but he never called me back and messed my order up. I ordered a complete firewall insulation kit from him and he shipped part of the order out and two weeks later I got parts from a different vendor. The insulation panels from the differnt vendors did not match at all..

bad6772 · 12-17-2007, 03:02 AM

Like a said........your not dealing with Paul personally.......his business but its not him.....
And he probably has no idea of any of this...........

BLACK AND BLUE 67-72 · 12-17-2007, 07:12 AM

I've dealt with him before, and was short on a couple of items, told them about it and the problem was fixed in a couple of days.

**70cst** · 12-17-2007, 07:34 AM

I have dealt with three Vendors...Wess, Tim Christian...and Paul.[ I would order from them in a "Heartbeat" . Maybe with Christmas around the corner, Grandchildren, and maybe with GMCPaul the help is the issue. Either way the three mentioned are honest, trusworthy, and they know their trucks. No one is perfect and as we go through life and business we will have an occasionsl glitch. I say call and email Paul and give him time to call back. Remember...it's the season to be patient and understanding. I wish you all the best of luck. Things will work out.

68gmsee · 12-17-2007, 07:33 AM

Quote:

Originally Posted by bad6772

Like a said........your not dealing with Paul personally.......his business but its not him.....
And he probably has no idea of any of this...........

I think some of the guys, me included, misunderstood what you were saying when you said "lately you don't deal with Paul." Thanks for explaining it.

I've heard nothing but good things about him personally. Maybe someone that know him needs to let him know about what's happening...

bad6772 · 12-17-2007, 07:47 AM

Quote:

Originally Posted by 68gmsee

I think some of the guys, me included, misunderstood what you were saying when you said "lately you don't deal with Paul." Thanks for explaining it.

I've heard nothing but good things about him personally. Maybe someone that know him needs to let him know about what's happening...

im shure this will get addressed soon....i loved dealing with paul and he hasnt lost all by business .....i would and will buy from him again,once all this clears up but there are lots of vendors who will gladly take my money

FRENCHBLUE72 · 12-17-2007, 11:43 AM

I always order all my parts from wes and wes only hes right up the road and always treats me right....

bad6772 · 12-17-2007, 01:40 PM

as the same reason i did with paul.......not exactly up the road but none the less....here in my state and paul USE to be at every swap meet.........tony

12-15-2007, 02:09 PM	#1
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	? about GMCPaul I had emailed Paul about some parts on 11-20-07 and he replied 11-24-07 and mentioned about getting back to me. Since then I have not heard from him. I tried to contact him through email several times since then and have had not luck getting a reply. Does anybody know the best way to contact him? Thanks Jason

12-15-2007, 02:18 PM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: ? about GMCPaul I've never had a lot of issues, but I remember someone mentioning something going on (either personal or business-wise) that may lead to slowdowns. Was it an ice storm or something? I forget. Personally, when I need to talk to anyone I'm shopping with online, I will call the place directly. I would use the phone numbers listed at the site, myself. I rarely communicate and do business via email. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

12-15-2007, 03:49 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: ? about GMCPaul paul is a great guy call him at the number listed on his site i've bought parts from he a few times good guy to deal with __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-15-2007, 05:26 PM	#4
WHYBYNU WHYBYNU when old will do Join Date: Feb 2002 Location: Hot Springs, AR. Posts: 643	Re: ? about GMCPaul I have bought from him for years. Always A+ service Call his number 765-569-2906. He is 2nd to none when it comes to these trucks and the parts he sells. JOHN __________________ 71 Cheyenne super 2 tone green and white ZZ6 - Th350 4/6 drop 20x8.5 / 20x10 Billet Specialties

12-15-2007, 05:32 PM	#5
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: ? about GMCPaul I have never heard anything negative about GMCPaul. I will try to give him a call tomorrow as I am not sure how often he checks his email. I also heard about some flooding in the area he is located in. Jason

12-15-2007, 05:44 PM	#6
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: ? about GMCPaul lately you dont deal with paul.... Last edited by bad6772; 12-15-2007 at 05:45 PM.

12-15-2007, 05:49 PM	#7
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: ? about GMCPaul Bad6772 - what do you mean by that. Jason

12-15-2007, 05:51 PM	#8
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: ? about GMCPaul I read on here he became a grandpa recently. Give him a call in the a.m. Good luck! __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

12-15-2007, 06:03 PM	#9
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: ? about GMCPaul id rather not bash anyone here...plus i dont think its permitted here... Last edited by bad6772; 12-15-2007 at 06:04 PM.

12-16-2007, 05:47 AM	#10
TotalChevy1 Registered User Join Date: Mar 2007 Location: Phoenix, Arizona Posts: 175	Re: ? about GMCPaul I think do to their size, you may run into some delays, but i just ordered a ton of stuff and most of it came within two weeks. I still have a few back orders but that's expects on some stuff. I think they are one of the better venders __________________ 1972 c-20, 350/350, dana 60 w/456 gears(no Posi)

12-16-2007, 06:47 AM	#11
Olden Days Living In The Past Join Date: Nov 2003 Location: Rockies Posts: 709	Re: ? about GMCPaul I dont know why your even asking. all that time without a response? move on to the the next vendor. There are plenty of them that want your business. That is not meant as a slam, or anything personal... just business Last edited by Olden Days; 12-16-2007 at 06:48 AM.

12-16-2007, 07:56 AM	#12
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: ? about GMCPaul Yea, what OldenDays said...... __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-16-2007, 08:24 AM	#13
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	Re: ? about GMCPaul Here's a little more info in this post: http://67-72chevytrucks.com/vboard/s...d.php?t=263843 __________________ Robert Member 1532
$90\87Formula is offline$

12-16-2007, 08:56 AM	#14
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: ? about GMCPaul I've heard nothing but good things about GMC Paul. Occasionally there are circumstances beyond anyone's control (IE; I got a PC virus and had to reformat a drive that had my stored e-mail on it....I lost record of mail that I had to respond to). Give him the benefit of the doubt and try again by phone.

12-16-2007, 09:37 AM	#15
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: ? about GMCPaul Paul is strait up!! I have known him for 8 years and he treats his clientell like family. You will have no worries with him. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys



Register or Log In To remove these advertisements.

12-16-2007, 02:02 PM	#16
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: ? about GMCPaul lately you do not deal with paul..period...trust me...i know i have always dealt with him.. for the last 10 years and i dont want to bash....but i placed an order and was told 600 dollars worth of parts were waiting on me...so i took the 3.5 hour drive to pick up the parts that were waiting on me....well None of the parts were there.. NONE this is after 5 confirmed emails and personal numbers given to me.....i then decided to order again and have the parts shipped to me...even though i could have just done that from my house...well it came time to pay and i did not have any small bills....and they did not either....so for 8 dollars they lost a 600 sale......i even agreed to pay for shipping.....? moderators i am not trying to break any rules.....nor bash...... edit....this dealing was not with paul himself....but its still his company Last edited by bad6772; 12-16-2007 at 02:03 PM.

12-16-2007, 06:35 PM	#17
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: ? about GMCPaul I don't want to bash on the guy but he never called me back and messed my order up. I ordered a complete firewall insulation kit from him and he shipped part of the order out and two weeks later I got parts from a different vendor. The insulation panels from the differnt vendors did not match at all..

12-17-2007, 03:02 AM	#18
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: ? about GMCPaul Like a said........your not dealing with Paul personally.......his business but its not him..... And he probably has no idea of any of this...........

12-17-2007, 07:12 AM	#19
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: ? about GMCPaul I've dealt with him before, and was short on a couple of items, told them about it and the problem was fixed in a couple of days. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

12-17-2007, 07:34 AM	#20
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: ? about GMCPaul I have dealt with three Vendors...Wess, Tim Christian...and Paul.[ I would order from them in a "Heartbeat" . Maybe with Christmas around the corner, Grandchildren, and maybe with GMCPaul the help is the issue. Either way the three mentioned are honest, trusworthy, and they know their trucks. No one is perfect and as we go through life and business we will have an occasionsl glitch. I say call and email Paul and give him time to call back. Remember...it's the season to be patient and understanding. I wish you all the best of luck. Things will work out. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 12-17-2007 at 07:41 AM.

12-17-2007, 11:43 AM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: ? about GMCPaul I always order all my parts from wes and wes only hes right up the road and always treats me right.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-17-2007, 01:40 PM	#24
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: ? about GMCPaul as the same reason i did with paul.......not exactly up the road but none the less....here in my state and paul USE to be at every swap meet.........tony Last edited by bad6772; 12-17-2007 at 07:49 PM.

Register or Log In To remove these advertisements.