Motorcycle valve stems? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alvin · 12-15-2007, 04:29 PM

I know it sounds crazy, but I just got my new wheels and I'm trying to find a valve stem that meets my "vision". The wheels have a light silver painted center and a machined lip. I don't want to run chrome valve stems or caps, but the automotive selection of aluminum valve stems is lacking.

Does anyone know if it's possible to run motorcycle valve stems on automotive wheels?

I found these, and they're freakin' expensive, but would look great (with an aluminum cap of course).

72cheyennesuper20 · 12-15-2007, 04:34 PM

Are those the TKO torque thrusts? They look sweet. The valve stems are cool. Which one were you thinking about getting the 90 degree or straight?

Alvin · 12-15-2007, 04:40 PM

Thanks! They are Torq-thrust Originals, 17x8, 4.5" backspacing. I really like them. Can't wait to get tires mounted.

I'd go with the straight valve stems.

cdowns · 12-15-2007, 05:19 PM

measure your valve stem hole and thickness of the rim have it written down then call(telephone required) the parts place and ask the specs on the valve stems

Alvin · 12-15-2007, 05:23 PM

Quote:

Originally Posted by cdowns

measure your valve stem hole and thickness of the rim have it written down then call(telephone required) the parts place and ask the specs on the valve stems

Yeah thanks. <smart-aleck comment removed due to holiday season> Since the parts place is most likely closed (third shift required), I figured I'd try the message board.

NOW, does anyone have an answer to my question? That's what I was going for when I asked it in the first place.

CG · 12-15-2007, 06:06 PM

Quote:

Originally Posted by Alvin

Thanks! They are Torq-thrust Originals, 17x8, 4.5" backspacing. I really like them. Can't wait to get tires mounted.

I'd go with the straight valve stems.

I cant wait to see em. So you are going the same size on all four corners? Going larger than 15 inch is sooo against my rules of building our trucks, but I think yours is finally going to be the one that changes my mind...hurry up and get those stems.

Alvin · 12-16-2007, 07:11 AM

Quote:

Originally Posted by CG

I cant wait to see em. So you are going the same size on all four corners? Going larger than 15 inch is sooo against my rules of building our trucks, but I think yours is finally going to be the one that changes my mind...hurry up and get those stems.

Yeah, I've got the same size wheels at each corner, but different tire sizes front and back. My rear tires are gonna rub on the outside, so I'm gonna have to modify that area a little bit.

I'm really happy with how they look, and I'm glad other people like them too.

BigDaddyDave · 12-15-2007, 05:41 PM

Lets remember,its almost Christmas!

corn · 12-15-2007, 05:47 PM

Yes, most aftermarket wheels use the same .453 stems...

Alvin · 12-15-2007, 05:52 PM

Quote:

Originally Posted by corn

Yes, most aftermarket wheels use the same .453 stems...

Thank you so very much! I knew with all the motorcycles I've seen posted around this board somebody would know the answer to this. Again thanks, I really appreciate your help.

68C15 · 12-20-2007, 02:50 AM

Quote:

Originally Posted by corn

Yes, most aftermarket wheels use the same .453 stems...

could you take the tires off that old Honda and measure to be sure? oh wait a minute, it's still in my neighbor's yard.

corn · 12-20-2007, 01:13 PM

Quote:

Originally Posted by 68C15

could you take the tires off that old Honda and measure to be sure? oh wait a minute, it's still in my neighbor's yard.

Tell him to bring that to me at once! That, or your kid will shoot him with a BB-gun...

**truckdude239** · 12-16-2007, 02:30 AM

advance auto part sells metal stems most car and truck wheels use a .453 vavle stem

c10addict · 12-16-2007, 02:48 AM

If you are not wanting the chrome look and all you can find is chrome, take a scuff pad and scuff them down... That gives chrome a nice brushed aluminum look... I have done it alot of times... You will like the results.

Alvin · 12-19-2007, 07:37 PM

Well after all that hoopla, I just ran plain 'ol rubber valve stems. I went through my collections of photos from GoodGuys and other local shows and looked at the valve stems other people had. The black rubber ones were the least noticeable to me. What do you think?

and with the money I saved I can get my first tank of gas :P

BigSky71 · 12-19-2007, 07:41 PM

Love the wheels, and the black valves stem look "period correct" imo..

How about some picts of the whole truck, do you have a build thread going?

GREASEMONKEY72 · 12-19-2007, 08:09 PM

i think it looks good just like that but then im old fanshioned

Alvin · 12-20-2007, 09:46 AM

Quote:

Originally Posted by BigSky71

Love the wheels, and the black valves stem look "period correct" imo..

How about some picts of the whole truck, do you have a build thread going?

Thanks! There's a link to my build thread in my signature.

12-15-2007, 04:29 PM	#1
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Motorcycle valve stems? I know it sounds crazy, but I just got my new wheels and I'm trying to find a valve stem that meets my "vision". The wheels have a light silver painted center and a machined lip. I don't want to run chrome valve stems or caps, but the automotive selection of aluminum valve stems is lacking. Does anyone know if it's possible to run motorcycle valve stems on automotive wheels? I found these, and they're freakin' expensive, but would look great (with an aluminum cap of course). __________________ Ethel - The Legend Continues... Ethel has been sold.

12-15-2007, 04:34 PM	#2
72cheyennesuper20 Registered User Join Date: May 2005 Location: Portland, OR. Posts: 414	Re: Motorcycle valve stems? Are those the TKO torque thrusts? They look sweet. The valve stems are cool. Which one were you thinking about getting the 90 degree or straight?

12-15-2007, 04:40 PM	#3
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Motorcycle valve stems? Thanks! They are Torq-thrust Originals, 17x8, 4.5" backspacing. I really like them. Can't wait to get tires mounted. I'd go with the straight valve stems. __________________ Ethel - The Legend Continues... Ethel has been sold.

12-15-2007, 05:19 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Motorcycle valve stems? measure your valve stem hole and thickness of the rim have it written down then call(telephone required) the parts place and ask the specs on the valve stems __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-15-2007, 05:41 PM	#8
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: Motorcycle valve stems? Lets remember,its almost Christmas! __________________ BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ \| See it in Action!

12-15-2007, 05:47 PM	#9
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Motorcycle valve stems? Yes, most aftermarket wheels use the same .453 stems...

12-16-2007, 02:30 AM	#13
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Motorcycle valve stems? advance auto part sells metal stems most car and truck wheels use a .453 vavle stem __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-16-2007, 02:48 AM	#14
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Motorcycle valve stems? If you are not wanting the chrome look and all you can find is chrome, take a scuff pad and scuff them down... That gives chrome a nice brushed aluminum look... I have done it alot of times... You will like the results. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

12-19-2007, 07:37 PM	#15
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Motorcycle valve stems? Well after all that hoopla, I just ran plain 'ol rubber valve stems. I went through my collections of photos from GoodGuys and other local shows and looked at the valve stems other people had. The black rubber ones were the least noticeable to me. What do you think? and with the money I saved I can get my first tank of gas :P __________________ Ethel - The Legend Continues... Ethel has been sold.

12-19-2007, 07:41 PM	#16
BigSky71 LAIDOUT Join Date: Jan 2005 Location: NW Montana Posts: 928	Re: Motorcycle valve stems? Love the wheels, and the black valves stem look "period correct" imo.. How about some picts of the whole truck, do you have a build thread going? __________________ 67 2wd Shorty Build Pictures

12-19-2007, 08:09 PM	#17
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Motorcycle valve stems? i think it looks good just like that but then im old fanshioned __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.