Loaded Up & Ready for Blasting and Powder Coating - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72ChevyCheyenne · 10-13-2002, 07:25 PM

Man, I'm getting excited!

chevy2racr · 10-13-2002, 10:00 PM

just doin the frame? what kinda quote you get to blast and powder coat?

Chevyc10! · 10-13-2002, 10:11 PM

Where are you having it done? and how much? I'm in GA and don't know anyone with a large enough facility...

72ChevyCheyenne · 10-14-2002, 07:08 AM

I'm taking it to Performance Coatings in Jonesboro.
http://www.headercoatings.com/
They quoted me $500 to do the frame, cross members, upper and lower control arms.

guitarman · 10-14-2002, 07:48 AM

Conyers Speed World has an oven large enough. I work there part time and we do frames all the time. You can call them for a quote at (770) 761-3363 and ask for Ted and say Bert sent you.

10-13-2002, 07:25 PM	#1
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	Loaded Up & Ready for Blasting and Powder Coating Man, I'm getting excited! Attached Images __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

10-13-2002, 10:00 PM	#2
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	just doin the frame? what kinda quote you get to blast and powder coat? __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

10-13-2002, 10:11 PM	#3
Chevyc10! Registered User Join Date: Dec 2000 Location: Centerville Ga. USA Posts: 804	Where are you having it done? and how much? I'm in GA and don't know anyone with a large enough facility... __________________ 68 SWB The Surgeon General doesn't say anything about smoking a Ford!!! Would rather be ran over repeatedly by a Chevy than drive a Ford!!! Paralyzed from the neck up and confined to a hat! Kathleen, Georgia USA

10-14-2002, 07:08 AM	#4
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	I'm taking it to Performance Coatings in Jonesboro. http://www.headercoatings.com/ They quoted me $500 to do the frame, cross members, upper and lower control arms. __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

10-14-2002, 07:48 AM	#5
guitarman Do it well or don't do it Join Date: Apr 2002 Location: Georgia Posts: 457	Conyers Speed World has an oven large enough. I work there part time and we do frames all the time. You can call them for a quote at (770) 761-3363 and ask for Ted and say Bert sent you. __________________ Try to be the person your dog thinks you are. Excellent paint and body site: http://www.autobody101.com/ Visit my Web Site http://home.attbi.com/~agfosteriii



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.