Opinions on this tailgate treatment... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 02-07-2008, 02:29 PM

Good, bad, indifferent- whadaya think?

Frizzle Fry · 02-07-2008, 02:58 PM

Lose the indentation? I kinda like the look of the indentation on the truck gates, but it might work well on you Blazer with the top on.

Tough call. There's a fine line between custom/clean/smooth and plain.

Maybe post some with and without for comparison.

BigSky71 · 02-08-2008, 02:47 AM

Quote:

Originally Posted by Frizzle Fry

Lose the indentation? Tough call. There's a fine line between custom/clean/smooth and plain.

I gotta agree with FF on this one, I think the indentation sets our trucks/blazers apart from new trucks with flat tailgates.

hotrodhomi · 02-07-2008, 03:07 PM

I really like it. My gate is smooth with out the "CHEVROLET" and I wish it wasn't.

Brad · 02-07-2008, 04:09 PM

I like it!

Super-Dave · 02-07-2008, 05:51 PM

How did ya do it ? Did ya just remove the molding and fill in holes or mold in the moldings?

68C15 · 02-07-2008, 09:33 PM

my opinion;
it doesnt look right unless it is a two tone paint job (the bottom right). maybe best done with the tail light treatment like the one on the bottom left.

olblue60@aol.com · 02-07-2008, 10:01 PM

It also removes the handle from the outside.

Luvlegs · 02-07-2008, 10:04 PM

Personally, I think it's pretty slick!

Bishops Trucks · 02-07-2008, 10:08 PM

I like the original look myself.

jlaird · 02-07-2008, 10:21 PM

love it! Without the chevrolet too.

greasy68 · 02-07-2008, 11:08 PM

I think it only looks good with the contrasting lettering. Just indents looks like it is not finished.

nvrsatisfied · 02-07-2008, 11:36 PM

i like all off them...i am wanting to do the look in the bottom left, but also add a roll pan....wonder what that would look like???

67ChevyRedneck · 02-07-2008, 11:40 PM

I really like it! Since there's 4 trucks like that... is this a "new" after market style gate or is it just a coincidence that they all had the same custom work done?

**John Fabris** · 02-08-2008, 12:40 AM

All photoshopped.... as that is my truck in the upper right, and my tailgate still has the indentation...

Looks good though!!!

67ChevyRedneck · 02-08-2008, 12:47 AM

Quote:

Originally Posted by John Fabris

All photoshopped.... as that is my truck in the upper right, and my tailgate still has the indentation...

Looks good though!!!

Whoops, you're right

This silver truck doesn't even have a panel gap on the left side

nvrsatisfied · 02-08-2008, 01:15 AM

took it back to the body shop and they fixed it...

1LoC10 · 02-08-2008, 02:55 AM

I like the indent too... but it has to still have the Chevrolet too

1LoC10 · 02-08-2008, 03:02 AM

heres one like you posted

1LoC10 · 02-08-2008, 03:10 AM

some more

nvrsatisfied · 02-08-2008, 03:28 AM

you could mate a Sir Micheals smooth tailgate (which looses the big indention) and the original so that you get chevrolet across the back to get this look...right????? that is what i was going to attempt???

or do they sell it smooth with a "chevy" logo already in them??

1LoC10 · 02-08-2008, 03:41 AM

they sell a skin that just covers the indent so you know

1LoC10 · 02-08-2008, 04:00 AM

These are the skins Mar-K sells for just the indent, no need for a full skin if your just going to cut it to keep the letters

weasel29gm · 02-08-2008, 04:04 AM

Gates are overrated, as far as stock goes. Smooth,w/o the indention looks ok. I can go with or w/o the emboss letters. Go for it!!!!

ChevLoRay · 02-08-2008, 04:31 AM

I like the truck from Kentucky. The one-piece appearing tail light lenses are nice, but not what I'd do. To lose the indentation that locates the handle is okay, but leaving the CHEVROLET has to be done. The character line that is in line with the top of the tail lights is important to the overall appearance of the body.

If you like it, go for it.

02-07-2008, 02:29 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Opinions on this tailgate treatment... Good, bad, indifferent- whadaya think? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 02-07-2008 at 02:33 PM.

02-07-2008, 02:58 PM	#2
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Opinions on this tailgate treatment... Lose the indentation? I kinda like the look of the indentation on the truck gates, but it might work well on you Blazer with the top on. Tough call. There's a fine line between custom/clean/smooth and plain. Maybe post some with and without for comparison.

02-07-2008, 03:07 PM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Opinions on this tailgate treatment... I really like it. My gate is smooth with out the "CHEVROLET" and I wish it wasn't. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-07-2008, 04:09 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: Opinions on this tailgate treatment... I like it! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

02-07-2008, 05:51 PM	#6
Super-Dave Registered User Join Date: Sep 2006 Location: Lompoc, Ca Posts: 128	Re: Opinions on this tailgate treatment... How did ya do it ? Did ya just remove the molding and fill in holes or mold in the moldings?

02-07-2008, 09:33 PM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Opinions on this tailgate treatment... my opinion; it doesnt look right unless it is a two tone paint job (the bottom right). maybe best done with the tail light treatment like the one on the bottom left.

02-07-2008, 10:01 PM	#8
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Opinions on this tailgate treatment... It also removes the handle from the outside. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

02-07-2008, 10:04 PM	#9
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Opinions on this tailgate treatment... Personally, I think it's pretty slick! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

02-07-2008, 10:08 PM	#10
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Opinions on this tailgate treatment... I like the original look myself. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-07-2008, 10:21 PM	#11
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Opinions on this tailgate treatment... love it! Without the chevrolet too.

02-07-2008, 11:08 PM	#12
greasy68 Registered User Join Date: Jan 2008 Location: austin texas Posts: 202	Re: Opinions on this tailgate treatment... I think it only looks good with the contrasting lettering. Just indents looks like it is not finished. __________________ Mike 68 C10 LWB midnight blue metallic 307ci, 700R4, HEI front discs, leaf spring rear tilt steering wheel, stock ride height, rally wheels, 2007 Dodge Charger(Hemi)

02-07-2008, 11:36 PM	#13
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: Opinions on this tailgate treatment... i like all off them...i am wanting to do the look in the bottom left, but also add a roll pan....wonder what that would look like??? __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

02-07-2008, 11:40 PM	#14
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Opinions on this tailgate treatment... I really like it! Since there's 4 trucks like that... is this a "new" after market style gate or is it just a coincidence that they all had the same custom work done? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-08-2008, 12:40 AM	#15
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Opinions on this tailgate treatment... All photoshopped.... as that is my truck in the upper right, and my tailgate still has the indentation... Looks good though!!! __________________ John Fabris 67 C10 SWB

02-08-2008, 01:15 AM	#17
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: Opinions on this tailgate treatment... took it back to the body shop and they fixed it... Attached Images __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174



Register or Log In To remove these advertisements.

02-08-2008, 02:55 AM	#18
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Opinions on this tailgate treatment... I like the indent too... but it has to still have the Chevrolet too __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 02-08-2008 at 03:02 AM.

02-08-2008, 03:02 AM	#19
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Opinions on this tailgate treatment... heres one like you posted __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

02-08-2008, 03:10 AM	#20
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Opinions on this tailgate treatment... some more __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 02-08-2008 at 03:11 AM.

02-08-2008, 03:28 AM	#21
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: Opinions on this tailgate treatment... you could mate a Sir Micheals smooth tailgate (which looses the big indention) and the original so that you get chevrolet across the back to get this look...right????? that is what i was going to attempt??? or do they sell it smooth with a "chevy" logo already in them?? __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

02-08-2008, 03:41 AM	#22
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Opinions on this tailgate treatment... they sell a skin that just covers the indent so you know __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

02-08-2008, 04:00 AM	#23
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Opinions on this tailgate treatment... These are the skins Mar-K sells for just the indent, no need for a full skin if your just going to cut it to keep the letters __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

02-08-2008, 04:04 AM	#24
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Re: Opinions on this tailgate treatment... Gates are overrated, as far as stock goes. Smooth,w/o the indention looks ok. I can go with or w/o the emboss letters. Go for it!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

02-08-2008, 04:31 AM	#25
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Opinions on this tailgate treatment... I like the truck from Kentucky. The one-piece appearing tail light lenses are nice, but not what I'd do. To lose the indentation that locates the handle is okay, but leaving the CHEVROLET has to be done. The character line that is in line with the top of the tail lights is important to the overall appearance of the body. If you like it, go for it. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

Register or Log In To remove these advertisements.