CLEAN 71/71? custom/20 Super Driver's Fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mater · 02-11-2008, 11:14 AM

NEW PRICE!!!

I have a super clean driver's fender that I believe to be a 71 or 72 by the super emblem, but someone will chime in with details I'm sure. I know nothing about this fender as it came with my truck.

All I know is that it's in amazing shape for anywhere near Illinois and I don't need it. As you see in the pictures there' no rot and the light tan spots are old wasps nests. I apologize for the dust, but I'm renovating the house and the cutting is done in the garage.

I suggest not shipping, but if you want to pay and risk damage, I'll pack it anyway you want. Asking $125 OBO.

Thanks for looking

67mater · 02-12-2008, 11:21 AM

Make an offer, trades considered

67mater · 02-13-2008, 10:19 AM

No one close or too much?

67mater · 02-14-2008, 10:35 AM

ttt

67mater · 02-16-2008, 07:42 AM

How about comments, those are free right? Somebody make an offer.

Or trade for a 67 small window, power steering setup, hole-less bed, bench seat, driver's door handle, any of these I need.

If it helps anyone I;\'ma los trying to put together a trip to AZ, so if yuo're on the Way I'll drop it off . . .

1969k10stepside · 02-16-2008, 08:02 AM

What shape you need a bench seat in? I've got one that needs a cover. What shape cab are you needing? Trucks around here need the usual rockers,cab corners,floors but I'm sure you know that.

67mater · 02-16-2008, 08:05 AM

Nothing fancy in the bench, just need one that's wide enough. My GMC has a a bench that's propbably 12 inches in from the door on boths kdes; sucks.

I found a super clean Cab in AZ and am trying to put together trip to get it, so in that regard unless it's dirt cheap I'll pass. I currently have a small window but it need the bottom 8" repalced; completely

67mater · 02-20-2008, 10:39 AM

Anybody with trades or an offer?

1969stepside · 02-20-2008, 12:12 PM

what would you want for the fendor

67mater · 02-20-2008, 09:34 PM

how about $100

67mater · 02-24-2008, 12:00 AM

$100!!!!

larry may · 02-24-2008, 12:29 AM

50.00 Dollars you can drop it here in Missouri on your way to Arizona?

67mater · 02-24-2008, 01:14 AM

The shape it's in is worth more than $50. Thanks.

**special-K** · 02-24-2008, 02:56 AM

It`s a 71/72 by the engine badge under the marker light.The fender badges are screwed up.It should be a CustomDeluxe/20 or a CheyenneSuper/20.Not that any of this has an effect on condition or value.I see the upper trim holes are filled and smoothed.Were they welded?Just trying to be helpful since you`re getting no response.

abbysam1 · 02-24-2008, 03:06 AM

I am interested. I am down near Scott AFB. Could you hold them until next weekend?

Randy

67mater · 02-24-2008, 03:05 AM

I do believe the trim holes were welded ad then shot with a spot of paint to protect the back. Done very nicely (but not by me).

67mater · 02-24-2008, 03:38 AM

Not sure what you mean by "them," it's just the Driver's side fender, no problem abou next weekend.

abbysam1 · 02-24-2008, 06:14 AM

I will PM you.

67mater · 03-04-2008, 09:35 PM

Sold!

02-11-2008, 11:14 AM	#1
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	CLEAN 71/71? custom/20 Super Driver's Fender NEW PRICE!!! I have a super clean driver's fender that I believe to be a 71 or 72 by the super emblem, but someone will chime in with details I'm sure. I know nothing about this fender as it came with my truck. All I know is that it's in amazing shape for anywhere near Illinois and I don't need it. As you see in the pictures there' no rot and the light tan spots are old wasps nests. I apologize for the dust, but I'm renovating the house and the cutting is done in the garage. I suggest not shipping, but if you want to pay and risk damage, I'll pack it anyway you want. Asking $125 OBO. Thanks for looking Attached Images __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro Last edited by 67mater; 02-14-2008 at 01:34 AM. Reason: price

02-12-2008, 11:21 AM	#2
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender Make an offer, trades considered __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-13-2008, 10:19 AM	#3
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender No one close or too much? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-14-2008, 10:35 AM	#4
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender ttt __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-16-2008, 07:42 AM	#5
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender How about comments, those are free right? Somebody make an offer. Or trade for a 67 small window, power steering setup, hole-less bed, bench seat, driver's door handle, any of these I need. If it helps anyone I;\'ma los trying to put together a trip to AZ, so if yuo're on the Way I'll drop it off . . . __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-16-2008, 08:02 AM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: CLEAN 71/71? custom/20 Super Driver's Fender What shape you need a bench seat in? I've got one that needs a cover. What shape cab are you needing? Trucks around here need the usual rockers,cab corners,floors but I'm sure you know that. Last edited by 1969k10stepside; 02-16-2008 at 08:03 AM.

02-16-2008, 08:05 AM	#7
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender Nothing fancy in the bench, just need one that's wide enough. My GMC has a a bench that's propbably 12 inches in from the door on boths kdes; sucks. I found a super clean Cab in AZ and am trying to put together trip to get it, so in that regard unless it's dirt cheap I'll pass. I currently have a small window but it need the bottom 8" repalced; completely __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-20-2008, 10:39 AM	#8
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender Anybody with trades or an offer? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-20-2008, 12:12 PM	#9
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: CLEAN 71/71? custom/20 Super Driver's Fender what would you want for the fendor __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

02-20-2008, 09:34 PM	#10
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender how about $100 __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2008, 12:00 AM	#11
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender $100!!!! __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2008, 12:29 AM	#12
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: CLEAN 71/71? custom/20 Super Driver's Fender 50.00 Dollars you can drop it here in Missouri on your way to Arizona? __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

02-24-2008, 01:14 AM	#13
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender The shape it's in is worth more than $50. Thanks. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2008, 02:56 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: CLEAN 71/71? custom/20 Super Driver's Fender It`s a 71/72 by the engine badge under the marker light.The fender badges are screwed up.It should be a CustomDeluxe/20 or a CheyenneSuper/20.Not that any of this has an effect on condition or value.I see the upper trim holes are filled and smoothed.Were they welded?Just trying to be helpful since you`re getting no response. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-24-2008, 03:06 AM	#15
abbysam1 Registered User Join Date: Dec 2006 Location: O'Fallon, IL Posts: 18	Re: CLEAN 71/71? custom/20 Super Driver's Fender I am interested. I am down near Scott AFB. Could you hold them until next weekend? Randy __________________ 1972 Cheyenne C-20 Currrently being painted 1972 Custom C-10 My daily driver



Register or Log In To remove these advertisements.

02-24-2008, 03:05 AM	#16
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender I do believe the trim holes were welded ad then shot with a spot of paint to protect the back. Done very nicely (but not by me). __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2008, 03:38 AM	#17
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender Not sure what you mean by "them," it's just the Driver's side fender, no problem abou next weekend. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2008, 06:14 AM	#18
abbysam1 Registered User Join Date: Dec 2006 Location: O'Fallon, IL Posts: 18	Re: CLEAN 71/71? custom/20 Super Driver's Fender I will PM you. __________________ 1972 Cheyenne C-20 Currrently being painted 1972 Custom C-10 My daily driver

03-04-2008, 09:35 PM	#19
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: CLEAN 71/71? custom/20 Super Driver's Fender Sold! __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

Register or Log In To remove these advertisements.