71 3/4 C20 chevy just in - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-23-2008, 05:00 AM

Its been parted some.
Drivers bedside is good, no rust but a few dents $100, no shipping,
doors are pretty good $100 for pair without chrome wing windows, $150 for pair with wings, no shipping.
Wing Windows are pretty good $70 plus shipping.
Cab is rusty.
Drivers fender is good, some small dents in lower front corner $50, no ship on it.
Has both ALT brackets $34 shipped for pair,
has PB booster brackets $25 plus shipping for them. Has a good sway bar $40 plus shipping.
seat belts are OK, need a real good cleaning, no plastic on female ends, and plastic is broke male ends
Column is junk
3/4 front disc brake setup $100, no shipping
14 bolt rearend $100
AT crossmember $30 plus shipping
V8 motor stands $29 shipped
AT linkage $25 plus shipping
PS box $25 plus shipping
Blue visors look OK, $15 plus shipping
I'll sell the running gear and frame for $150 without AT crossmember and motor stands, motor and tranny, and body
See anything else you want ask and I'll price
Thanks Randy

teeitup · 02-23-2008, 05:02 AM

more

otsenre · 02-23-2008, 07:17 AM

Quote:

Originally Posted by teeitup

more

Randy, how is cargo light, harness, mounting hardware

**special-K** · 02-23-2008, 09:27 AM

How much for the frame horns?j/k

teeitup · 02-23-2008, 06:22 PM

Ernest, I'll check it out tonight, I never crawled up in the bed and looked at it yet.
Tim, those are some nice ones aren't they, very RARE!!!

Thanks Randy

bomar · 02-24-2008, 02:11 PM

how much for passenger door latch and passenger air vent handle with rod

teeitup · 02-24-2008, 07:49 PM

Otsenre, Ernest, I'm going to keep it for my truck, sorry
Bomar, I'll look at them later today and see if they are good
Thanks Randy

David Johnson · 02-25-2008, 08:25 AM

Randy, How's the cab paint divider trim below the rear window?

teeitup · 02-25-2008, 09:48 AM

David, I'll look at it better Sunday afternoon
Bomar, I'll check on your stuff then too. I had to go to the circus this afternoon.
Thanks Randy

*1972Ryan* · 02-25-2008, 06:16 PM

how much shipping on the auto crossmember to 28787?

teeitup · 02-25-2008, 09:24 PM

Ryan, I'll try to get a quote this afternoon. Thanks Randy

teeitup · 02-26-2008, 04:43 AM

Bomar, the pass side door latch is worn badly. I took off both sides vents with handles. $20 shipped for pair
David Johnson, David, the ones on this truck were dinged up quite some. I got another set, that is pretty good shape, I only senn one very small ding $20 plus shipping. You'd have to get new plastic clips for the back, they are not very expensive.
Thanks let me know guys, Randy

David Johnson · 02-26-2008, 06:54 AM

randy, I'll take the better set. let me know a total and I'll send you some $$. Shipping to 74873

teeitup · 02-26-2008, 07:23 AM

David, I'm headed to go get my kids now. I'll get with you Mon evening. Thanks Randy

berencam · 03-21-2008, 09:50 AM

hope i didnt pull this up from too far back, hows the drivers side door handle, and ebrake assy, if its not already gone.

teeitup · 03-21-2008, 04:24 PM

Sorry its already gone to scrap, Thanks Randy

Longhorn Man · 03-30-2008, 01:53 PM

uhhh, guys...

Quote:

Originally Posted by teeitup

Sorry its already gone to scrap, Thanks Randy

woodridge · 03-21-2008, 08:38 PM

Did you keep the PB booster bracket?

teeitup · 03-21-2008, 08:45 PM

Already sold it David, sorry. Randy

woodridge · 03-22-2008, 06:27 AM

No problem, thanks anyway.

Fishwacker · 03-23-2008, 09:31 AM

How much for the QJet including S/H? Thanks.

teeitup · 03-23-2008, 05:57 PM

$20 plus shipping, I think it will fit in a USPS priority flat rate box, if it does it would be $9 shipping. Thanks let me know, Randy

Fishwacker · 03-26-2008, 04:02 AM

Quote:

Originally Posted by teeitup

$20 plus shipping, I think it will fit in a USPS priority flat rate box, if it does it would be $9 shipping. Thanks let me know, Randy

Hey Randy, if the carb is off the truck can you check the I.D. number on the drivers side and let me know. I just want to make sure it hasn't been changed out to something much later & smoggy/detuned. Plus or minus 1-2 years will work, but the mid to late 70's had some really weird stuff done to these carbs that can be worked around but I prefer the earlier ones. Thanks.

teeitup · 03-26-2008, 07:55 AM

I'll try to get it Tues, I just got a 71 in that has a 4 barrell on it, I hauled in another 71 tonight not sure what it has on it, and I just bought a 72 that I'll probably get in this week sometime, surely one of them has the right one on it. Thanks Randy

68C10HotRod · 03-23-2008, 11:32 PM

Did you happen to keep the lower control arms? If you still have them, I'd really like to buy them. Shipping to 68134.

Thanks,
Bryan

02-23-2008, 05:00 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	71 3/4 C20 chevy just in Its been parted some. Drivers bedside is good, no rust but a few dents $100, no shipping, doors are pretty good $100 for pair without chrome wing windows, $150 for pair with wings, no shipping. Wing Windows are pretty good $70 plus shipping. Cab is rusty. Drivers fender is good, some small dents in lower front corner $50, no ship on it. Has both ALT brackets $34 shipped for pair, has PB booster brackets $25 plus shipping for them. Has a good sway bar $40 plus shipping. seat belts are OK, need a real good cleaning, no plastic on female ends, and plastic is broke male ends Column is junk 3/4 front disc brake setup $100, no shipping 14 bolt rearend $100 AT crossmember $30 plus shipping V8 motor stands $29 shipped AT linkage $25 plus shipping PS box $25 plus shipping Blue visors look OK, $15 plus shipping I'll sell the running gear and frame for $150 without AT crossmember and motor stands, motor and tranny, and body See anything else you want ask and I'll price Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-24-2008 at 07:55 PM.

02-23-2008, 05:02 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2008, 09:27 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: 71 3/4 C20 chevy just in How much for the frame horns?j/k __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-23-2008, 06:22 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Ernest, I'll check it out tonight, I never crawled up in the bed and looked at it yet. Tim, those are some nice ones aren't they, very RARE!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2008, 02:11 PM	#6
bomar Registered User Join Date: Dec 2007 Location: Cottage Grove, Oregon Posts: 52	Re: 71 3/4 C20 chevy just in how much for passenger door latch and passenger air vent handle with rod

02-24-2008, 07:49 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Otsenre, Ernest, I'm going to keep it for my truck, sorry Bomar, I'll look at them later today and see if they are good Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2008, 08:25 AM	#8
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 71 3/4 C20 chevy just in Randy, How's the cab paint divider trim below the rear window?

02-25-2008, 09:48 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in David, I'll look at it better Sunday afternoon Bomar, I'll check on your stuff then too. I had to go to the circus this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2008, 06:16 PM	#10
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: 71 3/4 C20 chevy just in how much shipping on the auto crossmember to 28787?

02-25-2008, 09:24 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Ryan, I'll try to get a quote this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2008, 04:43 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Bomar, the pass side door latch is worn badly. I took off both sides vents with handles. $20 shipped for pair David Johnson, David, the ones on this truck were dinged up quite some. I got another set, that is pretty good shape, I only senn one very small ding $20 plus shipping. You'd have to get new plastic clips for the back, they are not very expensive. Thanks let me know guys, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2008, 06:54 AM	#13
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 71 3/4 C20 chevy just in randy, I'll take the better set. let me know a total and I'll send you some $$. Shipping to 74873

02-26-2008, 07:23 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in David, I'm headed to go get my kids now. I'll get with you Mon evening. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-21-2008, 09:50 AM	#15
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: 71 3/4 C20 chevy just in hope i didnt pull this up from too far back, hows the drivers side door handle, and ebrake assy, if its not already gone. __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

03-21-2008, 04:24 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Sorry its already gone to scrap, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-21-2008, 08:38 PM	#18
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: 71 3/4 C20 chevy just in Did you keep the PB booster bracket? __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

03-21-2008, 08:45 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in Already sold it David, sorry. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-22-2008, 06:27 AM	#20
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: 71 3/4 C20 chevy just in No problem, thanks anyway. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

03-23-2008, 09:31 AM	#21
Fishwacker Never Give Up Join Date: Nov 2003 Location: El Cajon, CA Posts: 67	Re: 71 3/4 C20 chevy just in How much for the QJet including S/H? Thanks.

03-23-2008, 05:57 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in $20 plus shipping, I think it will fit in a USPS priority flat rate box, if it does it would be $9 shipping. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2008, 07:55 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 3/4 C20 chevy just in I'll try to get it Tues, I just got a 71 in that has a 4 barrell on it, I hauled in another 71 tonight not sure what it has on it, and I just bought a 72 that I'll probably get in this week sometime, surely one of them has the right one on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-23-2008, 11:32 PM	#25
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: 71 3/4 C20 chevy just in Did you happen to keep the lower control arms? If you still have them, I'd really like to buy them. Shipping to 68134. Thanks, Bryan __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

Register or Log In To remove these advertisements.