Camaro corvette guys, ID this steering wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joesjunk** · 02-25-2008, 11:43 PM

I believe this is a rosewood wheel but would like to know for sure. I have one just like it on my 69 Camaro, but it is a darker wood. I want to sell it, but would like to know what it is for sure and what it is worth.
Thanks, Joe

70GMCer · 02-26-2008, 12:43 AM

Looks like my old 67 Chevelle wood wheel......

**BAD4X4** · 02-26-2008, 01:44 AM

I agree on the chevelle wheel. New they are I think $200.00 is what I paid for my last one, for the whole setup.

ChevLoRay · 02-26-2008, 02:22 AM

GM offered a wooden rim steering wheel in several different vehicles, with different horn buttons. Sweaty palms didn't do the finish on the rim a whole lot of favors. The right one brings a tidy sum of $$ to the right man.

slammed1 · 02-26-2008, 04:41 AM

I have a wheel like that except not wood..........no center cap either thta I had always wondered where it came from/what it came on.

meathead95 · 02-26-2008, 05:07 AM

if its nice when you figure a price pm me im interested.

Down south truckin · 02-26-2008, 06:49 AM

Joe It looks like a rosewood wheel to me also is the hub the same as your 69? I might be interested as well when you figure out what you want for it ...Mike

**Joesjunk** · 03-18-2008, 07:06 AM

Ok, I put it on ebay, Check out what it sold for!! I knew it was valuable, but look.

http://cgi.ebay.com/ebaymotors/ws/eB...m=280207421171

Bob 68327 · 03-18-2008, 07:19 AM

Wow I wish I had one of those to sell !!! Big Money

ed2552 · 03-18-2008, 07:30 AM

AYK? Jeez, i wish i had a shed full of stuff like that, i would be rich

67_C-30 · 03-18-2008, 08:14 AM

Everybody bashes ebay, but I have had good luck rare items like that myself. I got $1977.52 for the '68 Corvette sidepipes below about 2 years ago. The PO took them off because they were too loud when the car just a year or so old, and they had been in his garage for about 35 years. I gave him $150 for them. I thought I did OK

. Funny thing was, I listed them for $300 with no reserve!

BurnoutNova · 03-18-2008, 08:20 AM

it seems like anything from a corvette or camaro these days is woth a buttload. a friend of mine sold an aluminum 67-8 camaro 302 intake at a swapmeet last weekend for 300$ it was within 20 minutes of setting it out to...

67_C-30 · 03-18-2008, 08:30 AM

I wish I had 5 or 6 of these. Don't you?

http://cgi.ebay.com/ebaymotors/ws/eB...225567408&rd=1

chevy_632 · 03-18-2008, 08:49 AM

that one looks to be out of a 67 chevelle 138 car...my dad had one similar out of a 67 427 4 speed vette tho new from 67 still in the box sold it for $1600..about $1400 to much if ya ask me but hey..haha

BurnoutNova · 03-18-2008, 09:04 AM

Quote:

Originally Posted by 67_C-30

I wish I had 5 or 6 of these. Don't you?

http://cgi.ebay.com/ebaymotors/ws/eB...225567408&rd=1

yeah that would be nice... the one i was talking about wasnt the cross-ram, it was just a single holley 4bbl intake, identicle to a 70- up LT-1 intake, but it had the oil filler tube on it.

67_C-30 · 03-18-2008, 09:10 AM

Quote:

Originally Posted by BurnoutNova

yeah that would be nice... the one i was talking about wasnt the cross-ram, it was just a single holley 4bbl intake, identicle to a 70- up LT-1 intake, but it had the oil filler tube on it.

Yeah, I figured that was the one you talking about. They are pretty much same as the L79 350HP 327 intake.

EAST SIDE LOW LIFE · 03-18-2008, 09:29 AM

Corvette wheels were made from teak wood. Rare [very rare] & big $$$$$.

esll.

BurnoutNova · 03-18-2008, 09:55 AM

Quote:

Originally Posted by 67_C-30

Yeah, I figured that was the one you talking about. They are pretty much same as the L79 350HP 327 intake.

there actully quite a bit diffrent, the L79 intake has 3 hole where the baseplate of the carb bolt to it, and they use a cast aluminum waterneck.

i'll see if i can find some pics

meathead95 · 03-18-2008, 03:58 PM

i have a dz302 steel crank and a 59-61 corvette 4 speed i bought in a package deal maybe i should put them on ebay

**special-K** · 03-18-2008, 04:30 PM

I wonder how much a black rimmed wheel like this is worth.

**jerry moss** · 03-18-2008, 05:34 PM

Tim,
i was thinking the exact same thing, i have 2 of them i was using on my trucks but if the price was right, i'd have no problem using something else.

**special-K** · 03-18-2008, 05:37 PM

I`m thinking a couple hundred +/-?

02-25-2008, 11:43 PM	#1
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Camaro corvette guys, ID this steering wheel I believe this is a rosewood wheel but would like to know for sure. I have one just like it on my 69 Camaro, but it is a darker wood. I want to sell it, but would like to know what it is for sure and what it is worth. Thanks, Joe Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

02-26-2008, 12:43 AM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Camaro corvette guys, ID this steering wheel Looks like my old 67 Chevelle wood wheel...... __________________ 1997 GMC Sierra Ext 1965 Mustang

02-26-2008, 01:44 AM	#3
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: Camaro corvette guys, ID this steering wheel I agree on the chevelle wheel. New they are I think $200.00 is what I paid for my last one, for the whole setup. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

02-26-2008, 02:22 AM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Camaro corvette guys, ID this steering wheel GM offered a wooden rim steering wheel in several different vehicles, with different horn buttons. Sweaty palms didn't do the finish on the rim a whole lot of favors. The right one brings a tidy sum of $$ to the right man. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-26-2008, 04:41 AM	#5
slammed1 1972 Chevrolet SWB Join Date: Jan 2008 Location: FT Smith AR Posts: 512	Re: Camaro corvette guys, ID this steering wheel I have a wheel like that except not wood..........no center cap either thta I had always wondered where it came from/what it came on. __________________ My New thread with pics (not my build thread yet.) http://67-72chevytrucks.com/vboard/s...46#post2573646 1972 Chevrolet 1/2 ton short wide bed,68 frt clip Project. 1980 Camaro Inherited when father passed,68K Miles 2003 Ford Mach1 FUN as Hell!! 2002 Dodge Ram 5-8 slam Rolling BillBoard (Gone not forgot) 2004 Dodge Ram HEMI 10" lifted on 37's and 2wd.

02-26-2008, 05:07 AM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Camaro corvette guys, ID this steering wheel if its nice when you figure a price pm me im interested. __________________ 72 2wd blazer 72 swb 4x4

02-26-2008, 06:49 AM	#7
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Camaro corvette guys, ID this steering wheel Joe It looks like a rosewood wheel to me also is the hub the same as your 69? I might be interested as well when you figure out what you want for it ...Mike

03-18-2008, 07:06 AM	#8
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Re: Camaro corvette guys, ID this steering wheel Ok, I put it on ebay, Check out what it sold for!! I knew it was valuable, but look. http://cgi.ebay.com/ebaymotors/ws/eB...m=280207421171 __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

03-18-2008, 07:19 AM	#9
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Camaro corvette guys, ID this steering wheel Wow I wish I had one of those to sell !!! Big Money __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

03-18-2008, 07:30 AM	#10
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Camaro corvette guys, ID this steering wheel AYK? Jeez, i wish i had a shed full of stuff like that, i would be rich __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

03-18-2008, 08:14 AM	#11
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Camaro corvette guys, ID this steering wheel Everybody bashes ebay, but I have had good luck rare items like that myself. I got $1977.52 for the '68 Corvette sidepipes below about 2 years ago. The PO took them off because they were too loud when the car just a year or so old, and they had been in his garage for about 35 years. I gave him $150 for them. I thought I did OK. Funny thing was, I listed them for $300 with no reserve! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

03-18-2008, 08:20 AM	#12
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Camaro corvette guys, ID this steering wheel it seems like anything from a corvette or camaro these days is woth a buttload. a friend of mine sold an aluminum 67-8 camaro 302 intake at a swapmeet last weekend for 300$ it was within 20 minutes of setting it out to...

03-18-2008, 08:30 AM	#13
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Camaro corvette guys, ID this steering wheel I wish I had 5 or 6 of these. Don't you? http://cgi.ebay.com/ebaymotors/ws/eB...225567408&rd=1 __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

03-18-2008, 08:49 AM	#14
chevy_632 chevy_632 Join Date: Jul 2004 Location: kelowna BC Posts: 104	Re: Camaro corvette guys, ID this steering wheel that one looks to be out of a 67 chevelle 138 car...my dad had one similar out of a 67 427 4 speed vette tho new from 67 still in the box sold it for $1600..about $1400 to much if ya ask me but hey..haha

03-18-2008, 09:29 AM	#17
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Camaro corvette guys, ID this steering wheel Corvette wheels were made from teak wood. Rare [very rare] & big $$$$$. esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)



Register or Log In To remove these advertisements.

03-18-2008, 03:58 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Camaro corvette guys, ID this steering wheel i have a dz302 steel crank and a 59-61 corvette 4 speed i bought in a package deal maybe i should put them on ebay __________________ 72 2wd blazer 72 swb 4x4

03-18-2008, 04:30 PM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Camaro corvette guys, ID this steering wheel I wonder how much a black rimmed wheel like this is worth. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-18-2008, 05:34 PM	#21
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Camaro corvette guys, ID this steering wheel Tim, i was thinking the exact same thing, i have 2 of them i was using on my trucks but if the price was right, i'd have no problem using something else. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-18-2008, 05:37 PM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Camaro corvette guys, ID this steering wheel I`m thinking a couple hundred +/-? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.