|
02-28-2008, 07:41 AM | #1 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Truck wont start.
Ok, so I took the truck to get smogged today, and on the way home I was driving on the freeway, when the gas pedal stopped working. I would press it down, but nothing would happen. So I pulled off the road, and stopped. I tried the gas again, nothing. So I turned the truck of, and checked it out. What I found was a hose that goes from the canister to the top of the front of the carb had a large hole burnt in it, fresh burn.
So I figured that must be the problem, so I kink the hose, try and start the truck, and it wont go. It will crank but not fire up. So I get it towed home, replace the hose, and the truck still, will not fire up. It cranks, gets gas, but will just not fire up. I even tried a little carb start spray, but got nothing. What do you guys think the problem is? |
02-28-2008, 08:16 AM | #2 |
Registered User
Join Date: Feb 2008
Location: Verona, NJ
Posts: 45
|
Re: Truck wont start.
check for spark?
__________________
1986 Chevy K10 4x4 305 Auto |
02-28-2008, 08:48 AM | #3 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
It got dark but thats first on the list tomorrow.
|
02-28-2008, 08:59 AM | #4 |
Registered User
Join Date: Mar 2006
Location: Kansas
Posts: 865
|
Re: Truck wont start.
Where it is getting fuel, it has to be spark. either none, or timing. If you didn't hear valves hitting pistons, I doubt if it jumped time. so that leaves it as a distributer problem. bad module, lost input power to coil, fried coil.
|
02-28-2008, 04:53 PM | #5 |
Registered User
Join Date: Feb 2008
Location: Verona, NJ
Posts: 45
|
Re: Truck wont start.
89crew, I'm pretty sure that even if you lose a timing chain in a 350, the pistons shouldn't hit the valves. I just don't think that particular engine is designed that way. So Rc 415, you might want to check the timing too.
__________________
1986 Chevy K10 4x4 305 Auto |
02-29-2008, 01:54 AM | #6 | |
Registered User
Join Date: Oct 2005
Location: Branchville SC
Posts: 1,647
|
Re: Truck wont start.
Quote:
Yes they will hit.... learned the hard way on the cooper river bridge in a 86 firebird...
__________________
2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks.. |
|
02-28-2008, 05:06 PM | #7 |
Registered User
Join Date: Mar 2005
Location: North Coast
Posts: 1,012
|
Re: Truck wont start.
If you don't have spark, and the coil ckecks out, then look for a broken wire to the pick-up coil in the base of the distributor.
|
02-28-2008, 07:57 PM | #8 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
Its not getting any spark. great now I gotta tear into the distributer.
|
02-28-2008, 08:03 PM | #9 |
Registered User
Join Date: Mar 2006
Location: Kansas
Posts: 865
|
Re: Truck wont start.
you want to verify that the distributer is turning. I would still expect it to be a module.
|
02-28-2008, 08:23 PM | #10 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
how do I check the coil and module?
|
02-28-2008, 10:35 PM | #11 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
the module was bad, i replaced it, i am getting spark, but i think the engine is flooded, because it wont start
Last edited by Rc 415; 02-28-2008 at 11:36 PM. |
02-28-2008, 11:41 PM | #12 |
Cruzzzn' Vet
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
|
Re: Truck wont start.
Yeah I was gonna say replace the module also, dang I thought I was looking under my hood, looks just like my snake pit
how's it going you get her fired up?? |
02-29-2008, 12:49 AM | #13 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
Yup, just fired up, runs great once again!
|
02-29-2008, 04:53 AM | #14 |
Registered User
Join Date: Dec 2004
Location: New Lenox, IL
Posts: 442
|
Re: Truck wont start.
I really thoght small blocks were non interferance. I have never had a chain let go or jump on one though.
__________________
79 Jimmy slammed AKA James Down |
02-29-2008, 06:04 AM | #15 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
I just sold it, 4100 cash.
Last edited by Rc 415; 02-29-2008 at 06:05 AM. |
02-29-2008, 07:52 AM | #16 |
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: Truck wont start.
you sold your truck? Did i miss something?
__________________
1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out Last edited by 84 400; 02-29-2008 at 07:55 AM. |
02-29-2008, 08:12 AM | #17 |
Dirteh Kitteh
Join Date: Nov 2006
Location: Mormon country
Posts: 2,484
|
Re: Truck wont start.
No, I think he's saying he sold the Firebird...
__________________
Darrin 1955 Willys CJ-5 all original and the oldest CJ-5 on the road. 2001 Dodge Neon (wife's car) 1995 Jeep Grand Cherokee Limited Edition SOLD 1981 K15 Custom Deluxe 4X4, rusty but trusty wood hauler. SOLD 1993 S-10 4X4 Tahoe SOLD Sign up with the Contact List RIP ESLL |
02-29-2008, 08:43 AM | #18 |
Flat Black, & Chrome!
Join Date: Jan 2007
Location: San Francisco
Posts: 852
|
Re: Truck wont start.
Nope, dont have a Firebird, Sold the ol' truck, A real nice guy from Ventura Ca. came up and bought it, He has a sweet collection of old cars, and he is going to finish it right. All you So Cal guys look out for it!
|
Bookmarks |
|
|