![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Friday's Toy
![]() Join Date: Nov 2006
Location: Ovilla, TX
Posts: 574
|
Motor mounts and towers?
I have a 1987 TBI motor going into a 72 LWB C10. The problem I am having right now is I have normal small block towers and new rubber mount, but the stock exhaust manifolds are hitting the frame when it still lacks about a 1.2 inch to bolt up. My 68 has a big block in it and the mounts are different. What kinds of towers do I need to run in order to get my clearances with the stock manifolds for the 87 350? Should I just run the ram horns and forget it or is there another solution. Right now if they were to bolt up as is the motor is leaning back like the trans crossmember is to low when it isn't.
__________________
68 C10, SWB Fleetside with a 454, Turbo 400 and 4.11 posi....Exxon/Mobil loves me. 2009 Jeep Rubicon 2011 Powerstroke FX4 (totaled) 71 C10, SWB Fleet with factory tilt 72 LWB C10, 350 700R4 with factory tilt |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Motor mounts and towers?
just slap the ram horn manifolds on there. They flow better anyways.
that or headers |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2007
Location: Fairview, ks
Posts: 203
|
Re: Motor mounts and towers?
I agree with Longhorn Man. I just dropped an '89 block in mine with headers, they cleared fine.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|