![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
![]()
Is it ok to use copper tubing as a replacement or does it have to be steel? I have some copper tub laying around and thought i better ask the pros about this one. Is it to soft to handle the pressure?
![]()
__________________
![]() |
![]() |
![]() |
![]() |
#2 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,288
|
Re: Brake line question
i was told it wasnt any good for pressure and is too soft and will get damaged easy . steel is available cheap i just bought two pieces and a union for my kids truck and it only cost me $10 to go behind the cab to almost by the rear wheels
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2004
Location: ashland oh
Posts: 660
|
Re: Brake line question
yes it will split fairly easy.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2006
Location: Central Maine
Posts: 210
|
Re: Brake line question
Agreed. Copper is a big no-no.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2006
Location: iowa
Posts: 722
|
Re: Brake line question
__________________
"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you." '84 chevy half ton short box 2wd, 67,000 actual miles ![]() '03 chevy 1500 HD crew cab 4x4 standard box, 6.0L ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
Not a good plan then
__________________
![]() |
![]() |
![]() |
![]() |
#7 |
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: Brake line question
Black: As stated by others copper is an accident waiting to happen, so don't use it. It has been my expirence that once one line goes, others will follow until you have replaced them all. This is especially true if you use "bulk" replacement line, because (A) it's a wee bit softer and (B) it's not as well coated as factory lines.
After replaceing mine several times I got a set of stainless steel ones and re-did the whole truck and switched to DOT 5 silicone fluid because it isn't water soluable, lubricates better and stands up to lots more heat. Go to "Classictube.com" and take a look around. A little pricey, but these lines are good, real good. You can't tell the difference between them and factory and they fit like a glove. Only downside is price (mine were about $250.00 American) and turn around time (about 6 weeks). I thought about it and figure if I have to spend 3 or 4 hours replaceing lines that have blown out at a most inopportune time, I've made my money back. ![]()
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
Great information Jim! Ive replaced every brake line other then the front to rear line, i was more curious whether or not copper was ok to use in this application but everyone has stated its not the smartest idea, i had to ask.
Ive seen people use Aluminum tubing on there brakes before and Aluminum is soft thats more of the reasoning to my copper tub question.
__________________
![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
I found this page where the guy is using a compression fitting to union the old and new line together, i thought this was also a no no ??
http://volksweb.relitech.com/brakeln.htm
__________________
![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
I picked up all my new lines and fittings today, my only issue is connecting the old line to the new because of the double flaring i have to do to my old line, i have a flaring tool but im not sure on the technique any tips or pics would be of great help.
Thanks
__________________
![]() |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,224
|
Re: Brake line question
Try this website.
__________________
- Greg |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
Great info on that site.
Thankyou
__________________
![]() |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Mar 2008
Location: BC Canada
Posts: 25
|
Re: Brake line question
The brake job went well! thanks for the tips everyone!
__________________
![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|