door shell interior - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ace in the hole · 03-16-2008, 05:49 AM

I have taken apart my doors to do a little work on them. On the inside of the outer skin the factory sprayed or brushed on a thick substance. Is this to stiffen up the skin and keep it from flexing or for sound or both? A lot of it is peeling up, any good ways to remove it?

**LockDoc** · 03-16-2008, 07:07 AM

-
That's the factory sound deadner. No easy way to get it off where it is stuck good. The loose stuff should just break off or scrape off.

LockDoc

Ace in the hole · 03-16-2008, 07:21 AM

thanks, that's what I suspected

TravisH · 03-16-2008, 09:57 PM

I used laquer thinner to soften it and then scraped it off. I didn't take my doors apart though so I had to try and get it all through the access hole... did one door completely like that. The other I still dumped some thinner in and scraped off the loose stuff but left the areas where it held on good. Its lasted 35 years already

Ace in the hole · 03-17-2008, 01:16 AM

thanks for the info. I have to do a little work to the bottoms of my doors so I may have an easier time getting to it.

03-16-2008, 05:49 AM	#1
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	door shell interior I have taken apart my doors to do a little work on them. On the inside of the outer skin the factory sprayed or brushed on a thick substance. Is this to stiffen up the skin and keep it from flexing or for sound or both? A lot of it is peeling up, any good ways to remove it? __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

03-16-2008, 07:07 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Re: door shell interior - That's the factory sound deadner. No easy way to get it off where it is stuck good. The loose stuff should just break off or scrape off. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-16-2008, 07:21 AM	#3
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: door shell interior thanks, that's what I suspected __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

03-16-2008, 09:57 PM	#4
TravisH Registered User Join Date: Mar 2005 Location: Alberta Posts: 316	Re: door shell interior I used laquer thinner to soften it and then scraped it off. I didn't take my doors apart though so I had to try and get it all through the access hole... did one door completely like that. The other I still dumped some thinner in and scraped off the loose stuff but left the areas where it held on good. Its lasted 35 years already

03-17-2008, 01:16 AM	#5
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: door shell interior thanks for the info. I have to do a little work to the bottoms of my doors so I may have an easier time getting to it. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.