![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2008
Location: Grande Prairie Alberta
Posts: 261
|
headlight troubles
k so last night i had 2 move the truck out of the garage last night and wen i turned on the headlights, only the passenger light came on. wen i turn on the high beams they both work properly. im guessing its just a loos connection but i didn't really look yet. if it is a loose connection would it be at the switch or the light socket. thanks
__________________
eh ![]() 1970 Chevy C20 daily driver ![]() 1975 GMC Jimmy 4x4 project ![]() 1966 GMC C10 Dad's project ![]() |
![]() |
![]() |
![]() |
#2 |
Size Matters
Join Date: Aug 2007
Location: Lyman, SC
Posts: 9,189
|
Re: headlight troubles
Well, it certainly could be a loose connection but aren't those dual element sealed beam lights? What if the low beam element is just burned out? Check for power at the low beam terminal.
__________________
"Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2006
Location: Georgia
Posts: 850
|
Re: headlight troubles
Yep, I was thinking the same thing, the low beam could just be burned out.
|
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: headlight troubles
burned out headlamp
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: headlight troubles
i always like to replace really old headlights in pairs to get better more evaen lighting//take the time to clean the contacts real good and put dielectric grease on them
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: May 2006
Location: North x Northwest BC
Posts: 62
|
Re: headlight troubles
Quote:
Had same thing happen to me yesterday...checking things over getting ready for spring (if the snow will ever leave...not) and turned the lights on and no head lights...Hummmm Flipped the high beams on and all 4 worked...back to low and left side is now on but no right. Wiggled the connections on/off at the lights and all is good now...just a bad connection there. So suspect you have the same deal going on |
|
![]() |
![]() |
![]() |
#7 |
Size Matters
Join Date: Aug 2007
Location: Lyman, SC
Posts: 9,189
|
Re: headlight troubles
Sometimes the element is wigglin around inside and when you bump it, it will start working...bump it again and it might stop working again.
__________________
"Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|