Did a lil work on the 71 today.......pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sicmaro · 03-24-2008, 10:54 AM

Decided i better do this swap, had all the parts here just been putting it off. 5.3L and 4L60E out of an 04 Tahoe. motor has 20k on it. Going to run LS1 electric fans and i modded my own wiring harness.

Bishops Trucks · 03-24-2008, 12:47 PM

Nice swap.

Trent_McAllister · 03-24-2008, 01:37 PM

I'm sure that took a little time but it looks good. I only wish you had of had time to hit the frame rail with some black rustoleum, would really make that new motor look good

72freak · 03-24-2008, 01:57 PM

Great looking truck

Sicmaro · 03-24-2008, 02:34 PM

Quote:

Originally Posted by Trent_McAllister

I'm sure that took a little time but it looks good. I only wish you had of had time to hit the frame rail with some black rustoleum, would really make that new motor look good

It crossed my mind, but this is going to just be my daily driver. I have my camaro to be pretty haha. Doing this truck on a budget!!

Trent_McAllister · 03-24-2008, 03:08 PM

well you can always throw a plastic sheet or tarp over the motor and go to town so no big loss. But it just makes me a little jealous considering I have considered pulling the WHOLE motor just to sand blast and paint the frame and replace the mounts.

Still, it looks very good and I don't suppose rust will be too much a problem. No one is going to be looking under your hood most likely and you've got the performance where it counts with the new motor. I like it.

see ten · 03-24-2008, 04:20 PM

Looks good! Now show us the full size pic you're using for your avatar with the big rims.

72BlckButy · 03-25-2008, 03:35 AM

Nice addition to the '71!

**Hart_Rod** · 03-25-2008, 04:19 AM

Welcome to the LS Club!

Sicmaro · 03-25-2008, 03:00 PM

Quote:

Originally Posted by Hart_Rod

Welcome to the LS Club!

Thanks!! been a member for awhile in my camaro.......

see ten · 03-25-2008, 03:51 PM

Yea.....

That's SWEET!

chevy72blu · 03-25-2008, 09:10 PM

Beautiful F body... any plans to make it a split bumper? The really set it off IMO

Just out of curiosity, what did you pay for the 5.3 and the 4l80e?

Sicmaro · 03-26-2008, 12:48 AM

Quote:

Originally Posted by chevy72blu

Beautiful F body... any plans to make it a split bumper? The really set it off IMO

Just out of curiosity, what did you pay for the 5.3 and the 4l80e?

I stole it!!! haha a friend of a friend had it in his garage. Its out of a 2004 tahoe. it has 20k on it. paid $800 for it came with trans, pcm, wiring, everything......

1LoC10 · 03-26-2008, 12:51 AM

looks nice

**Hart_Rod** · 03-26-2008, 01:17 AM

If you decide to go with stock manifolds, I've got an extra set off of an 98-00 Fbody that will work with out any clearance issues.

R/

Sicmaro · 03-26-2008, 01:52 AM

Quote:

Originally Posted by Hart_Rod

If you decide to go with stock manifolds, I've got an extra set off of an 98-00 Fbody that will work with out any clearance issues.

R/

good thing to bring up...... do those fit the best??? i have a set of 00 f-body ls1, 02 c5, and the 04 truck manifolds.

Sicmaro · 04-23-2008, 09:53 PM

got a few more things done, hoses, fans, wiring, aux. battery, intake pipe.........

Sicmaro · 05-23-2008, 06:41 PM

everything is down minus some wiring and the driveline.....

Premium72 · 03-26-2008, 01:30 AM

ya better bolt that engine in er its gana fly outa there..NICE!!

jayharrell · 05-23-2008, 07:19 PM

WOW.. looks easy when you see your pics.

I'm glad to see what you did with the frame and motor mounts with the manifolds. I've been wrestling with and issue with mine. I've been holding off on doing exactly what you did. At least now i can say i've seen it done. LOL.

Good looking build.

**WestButteTruck** · 05-23-2008, 07:25 PM

Are there ANY stock manifolds that will work without modifications? Car or truck?

Sicmaro · 05-23-2008, 07:28 PM

Quote:

Originally Posted by WestButteTruck

Are there ANY stock manifolds that will work without modifications? Car or truck?

if you change the motor mount stands i think you would be better off. I tried the truck, 99-02 f body, and vette. no luck, so i cut and welded haha

**Hart_Rod** · 05-24-2008, 04:14 AM

Quote:

Originally Posted by WestButteTruck

Are there ANY stock manifolds that will work without modifications? Car or truck?

98 Fbody manifolds will work. They are the top ones.

sierragrande71 · 05-24-2008, 04:23 AM

Damn Sicmaro, you made that look like a simple weekend swap! Maybe someday you can help me on mine

Just kidding. Whereabouts in Sac are you? I live West Sac.

Sicmaro · 05-24-2008, 05:31 AM

Quote:

Originally Posted by sierragrande71

Damn Sicmaro, you made that look like a simple weekend swap! Maybe someday you can help me on mine

Just kidding. Whereabouts in Sac are you? I live West Sac.

honestly its not a real hard swap. I used alot of the stock parts. i had 80% of it done in a week end haha. Im actually in the orangevale, folsom area.

03-24-2008, 10:54 AM	#1
Sicmaro Always wrenching!! Join Date: Apr 2007 Location: Sacramento, CA Posts: 301	Did a lil work on the 71 today.......pics Decided i better do this swap, had all the parts here just been putting it off. 5.3L and 4L60E out of an 04 Tahoe. motor has 20k on it. Going to run LS1 electric fans and i modded my own wiring harness. __________________ 71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress

03-24-2008, 12:47 PM	#2
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: Did a lil work on the 71 today.......pics Nice swap. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-24-2008, 01:37 PM	#3
Trent_McAllister Registered User Join Date: Jan 2002 Location: Elizabethtown, KY, USA Posts: 136	Re: Did a lil work on the 71 today.......pics I'm sure that took a little time but it looks good. I only wish you had of had time to hit the frame rail with some black rustoleum, would really make that new motor look good __________________ My Truck: 1968 C-20 Custom Camper

03-24-2008, 01:57 PM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Did a lil work on the 71 today.......pics Great looking truck __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-24-2008, 03:08 PM	#6
Trent_McAllister Registered User Join Date: Jan 2002 Location: Elizabethtown, KY, USA Posts: 136	Re: Did a lil work on the 71 today.......pics well you can always throw a plastic sheet or tarp over the motor and go to town so no big loss. But it just makes me a little jealous considering I have considered pulling the WHOLE motor just to sand blast and paint the frame and replace the mounts. Still, it looks very good and I don't suppose rust will be too much a problem. No one is going to be looking under your hood most likely and you've got the performance where it counts with the new motor. I like it. __________________ My Truck: 1968 C-20 Custom Camper

03-24-2008, 04:20 PM	#7
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Did a lil work on the 71 today.......pics Looks good! Now show us the full size pic you're using for your avatar with the big rims.

03-25-2008, 03:35 AM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Did a lil work on the 71 today.......pics Nice addition to the '71! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-25-2008, 04:19 AM	#9
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Did a lil work on the 71 today.......pics Welcome to the LS Club! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-25-2008, 03:51 PM	#11
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Did a lil work on the 71 today.......pics Yea..... That's SWEET!

03-25-2008, 09:10 PM	#12
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: Did a lil work on the 71 today.......pics Beautiful F body... any plans to make it a split bumper? The really set it off IMO Just out of curiosity, what did you pay for the 5.3 and the 4l80e? __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e Last edited by chevy72blu; 03-25-2008 at 09:11 PM.

03-26-2008, 12:51 AM	#14
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Did a lil work on the 71 today.......pics looks nice __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-26-2008, 01:17 AM	#15
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Did a lil work on the 71 today.......pics If you decide to go with stock manifolds, I've got an extra set off of an 98-00 Fbody that will work with out any clearance issues. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 03-26-2008 at 01:18 AM.

04-23-2008, 09:53 PM	#17
Sicmaro Always wrenching!! Join Date: Apr 2007 Location: Sacramento, CA Posts: 301	Re: Did a lil work on the 71 today.......pics got a few more things done, hoses, fans, wiring, aux. battery, intake pipe......... __________________ 71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress

05-23-2008, 06:41 PM	#18
Sicmaro Always wrenching!! Join Date: Apr 2007 Location: Sacramento, CA Posts: 301	Re: Did a lil work on the 71 today.......pics everything is down minus some wiring and the driveline..... __________________ 71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress

03-26-2008, 01:30 AM	#19
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: Did a lil work on the 71 today.......pics ya better bolt that engine in er its gana fly outa there..NICE!! __________________ WombatFire, Art-Design-MADNESS Follow My Build and Adventures on Instagram



Register or Log In To remove these advertisements.

05-23-2008, 07:19 PM	#20
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Did a lil work on the 71 today.......pics WOW.. looks easy when you see your pics. I'm glad to see what you did with the frame and motor mounts with the manifolds. I've been wrestling with and issue with mine. I've been holding off on doing exactly what you did. At least now i can say i've seen it done. LOL. Good looking build. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

05-23-2008, 07:25 PM	#21
WestButteTruck Kung Fu Master Join Date: Oct 2005 Location: Montana Posts: 547	Re: Did a lil work on the 71 today.......pics Are there ANY stock manifolds that will work without modifications? Car or truck? __________________ 72 GMC SuperCustom 4x4 1972 Chevrolet Cheyenne Super 4x4

05-24-2008, 04:23 AM	#24
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: Did a lil work on the 71 today.......pics Damn Sicmaro, you made that look like a simple weekend swap! Maybe someday you can help me on mine Just kidding. Whereabouts in Sac are you? I live West Sac.

Register or Log In To remove these advertisements.