Stepside rear bumper brackets, C-10 & K-10 the same?

[63 & 64 Bowties]

Anyone know if the rear bumper brackets made for a C-10 stepside are the same as the K-10 stepside?
Since the K-10 (4x4) has the leafs in the rear, it doesn't look like they'll interchange.

[62 short step]

The 60-62 brackets are different from the 63-66's. On the 4x4's the frames are the same width from 60-66. So you will need to get some from 63-66, but I had to cut a 1" or so off the lenght to make them work on my 4x4 when I had the stepside bed on it. I still have my brackets from the stepside bumper if you need them. I am not using them since I changed my bed to a fleetside. 62 short step.

[63 & 64 Bowties]

Originally Posted by 62 short step

The 60-62 brackets are different from the 63-66's. On the 4x4's the frames are the same width from 60-66. So you will need to get some from 63-66, but I had to cut a 1" or so off the lenght to make them work on my 4x4 when I had the stepside bed on it. I still have my brackets from the stepside bumper if you need them. I am not using them since I changed my bed to a fleetside. 62 short step.

I bought new brackets a while back, and since the weather's turning nice again, I decided I'd put them on today. They just looked too long. I haven't tried to put them on yet. Just didn't want to scratch them up in case I had to return them. One goes on one side of the frame rail and the other on the other side of the frame rail, right? They just looked like they stuck out too far away from the tailgate, but guess not.

[62 short step]

[QUOTE=63 & 64 Bowties;2642445] One goes on one side of the frame rail and the other on the other side of the frame rail, right?


Yep that is correct!