|
|
|
03-31-2008, 10:45 PM
|
#1 |
|
Registered User
Join Date: Nov 2007
Location: Las Vegas, NV
Posts: 103
|
lift after lower ?
Is there away i can lift my truck aboout 2inches after i put a flip kit on ?
|
|
|
|
03-31-2008, 10:54 PM
|
#2 |
|
Registered User
Join Date: Oct 2007
Location: Alberta
Posts: 117
|
Re: lift after lower ?
I dont think so. The only way I can think of is to use lift leaf springs.
__________________
Wes 1980 GMC Sierra SCSB-2WD 1986 Chevrolet C10 SCSB-2WD |
|
|
|
|
04-01-2008, 03:07 AM
|
#3 |
|
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: lift after lower ?
why put in a flip kit if you want it raised up 2 inches afterwards?
Maybe do a shackle and hanger kit for a total of 4 inches drop instead of 5-6 with a flip kit, and most shackles have multiple holes which would raise or lower it more, or if you want you could leave the stocker hangers on the front and only get a 2 inch drop? Just some idea you might want to consider, instead of lowering with a flip kit then raising it back up.
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 |
|
|
|
|
04-01-2008, 05:57 PM
|
#4 | |
|
Registered User
Join Date: Nov 2007
Location: Las Vegas, NV
Posts: 103
|
Re: lift after lower ?
Quote:
Prerunner1982 thanks ill check the site |
|
|
|
|
|
04-01-2008, 03:51 AM
|
#5 |
|
Registered User
Join Date: Jul 2007
Location: minnesota
Posts: 191
|
Re: lift after lower ?
they do make lift shackles. not very much lift but they do have em out there.
__________________
1981 - C-10 SCSB Planning on putting this thing on it's rocker! 
|
|
|
|
|
04-01-2008, 05:46 AM
|
#6 | |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
Re: lift after lower ?
Quote:
This does seem counter productive to me. But may provide the ride height you want with the ride quality as well. Retaining the stock springs but keeping the axle far enough from the frame to still have some travel. With the axle above the springs this should also lessen axle wrap.
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 04-01-2008 at 05:49 AM. |
|
|
|
|
|
04-01-2008, 06:07 PM
|
#7 |
|
Registered User
 
Join Date: Apr 2004
Location: Sacramento
Posts: 3,737
|
Re: lift after lower ?
Four link and bag it.
__________________
'72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht |
|
|
|
|
04-01-2008, 06:11 PM
|
#8 |
|
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Re: lift after lower ?
I used 2" shackles to bring the rear of my blazer up a bit.
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 04-01-2008 at 06:12 PM. |
|
|
|
|
04-01-2008, 07:24 PM
|
#9 |
|
Magnificent bastard
Join Date: Oct 2004
Location: Glendale, AZ
Posts: 196
|
Re: lift after lower ?
You can put a 2" add-a-leaf on it, but it will stiffen up the ride, which may be good or bad for you. I did this on my Suburban, because the flip put the axle on the frame, the extra leaf lifted back up a little and gave it a great ride.
__________________
1977 Big Block Burb |
|
|
|
|
04-02-2008, 06:18 AM
|
#10 |
|
Slugish
Join Date: Jan 2005
Location: Earlysville, Va.
Posts: 1,024
|
Re: lift after lower ?
Air shocks/ but would be pretty dang stiff.
|
|
|
|
|
04-02-2008, 06:43 AM
|
#11 |
|
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: lift after lower ?
i have seen it done. you take the rear shackle and you cut it right in the middle and take about 1 1/2 inch out and weld it back togather. i din't do it. but have seen a member do it and it looks good
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
