More 69 C-10 parts, fenders, motor mounts,wiring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*fbodywrench26* · 04-03-2008, 01:44 AM

Here is some more stuff

Solid front fenders, no holes just crappy primer $100.00 each or both for $175.00, I dont know about shipping though it might be expensive

Engine and light harness with some add on wires but pretty descent shape, will need some cleaning, was off a smallblock v8 $25.00 shipped

Gauge cluster, speedo, fuel, water temp, oil pressure, battery, descent shape and worked but silver paint is worn $40.00 plus shipping

Stepside taillights with brackets a pair $10.00 plus shipping

Big block motor mounts and stands brand new from Performance Online $120.00 shipped

Stepside foot steps- not pictured, descent shape, no holes, just surface rust, $40.00 +shipping for the pair

Solid drivers door, with trim holes along lower half of door, has been sandblasted, just has surface scale from sitting around $150.00 shipping??? not sure

Rolling chassis with 12 bolt rear axle, 5 lug disc brake conversion with all new parts, cab needing floors, stepside bed needing wood and fenders, rust free hood, boxes of misc. stuff, core support, non air heat set up, extra door glass, and regulators, auto non tilt column, wiper motor, factory auto crossmember.... $600.00 obo

Heater contol head, dirty and needs 1 knob, but works $25.00 +shipping

Power steering gearbox $100.00 +shipping

*fbodywrench26* · 04-03-2008, 01:46 AM

More pics

Cyclone44 · 04-03-2008, 01:51 AM

Stepside taillights with brackets a pair $10.00 plus shipping

Any cracks or chips? And total shipped to 37918 please..Thanks

*fbodywrench26* · 04-03-2008, 01:51 AM

more still

1971 K10 shortbox · 04-03-2008, 02:09 AM

Is that rolling chassis a short bed, and does it come with title?

1971 K10 shortbox · 04-03-2008, 02:20 AM

Is that rolling chassis a short bed, and does it come with title?

*fbodywrench26* · 04-03-2008, 02:39 AM

Yes the title is clear and comes with the chassis, yes it is a short bed 2wd

Cyclone44 · 04-03-2008, 05:44 PM

Have they been sold??

*fbodywrench26* · 04-03-2008, 06:43 PM

No I still have everything in this post Cyclone, are you still interested in the mounts?

Cyclone44 · 04-03-2008, 10:50 PM

At the top of this Thread in post #3 I ask about the tail lights...

Wootdog · 04-05-2008, 03:36 AM

Passenger side fender with shipping to 23462 In Virginia? Do you have a good right side door?

*fbodywrench26* · 04-05-2008, 04:27 AM

Wootdog, its expensive, $36.00 bucks round about guessing at weight on DHL website

*fbodywrench26* · 04-06-2008, 02:27 AM

bump

*fbodywrench26* · 04-06-2008, 05:17 PM

Wootdog, you still interested in the fender?

04-03-2008, 01:44 AM	#1
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	More 69 C-10 parts, fenders, motor mounts,wiring Here is some more stuff Solid front fenders, no holes just crappy primer $100.00 each or both for $175.00, I dont know about shipping though it might be expensive Engine and light harness with some add on wires but pretty descent shape, will need some cleaning, was off a smallblock v8 $25.00 shipped Gauge cluster, speedo, fuel, water temp, oil pressure, battery, descent shape and worked but silver paint is worn $40.00 plus shipping Stepside taillights with brackets a pair $10.00 plus shipping Big block motor mounts and stands brand new from Performance Online $120.00 shipped Stepside foot steps- not pictured, descent shape, no holes, just surface rust, $40.00 +shipping for the pair Solid drivers door, with trim holes along lower half of door, has been sandblasted, just has surface scale from sitting around $150.00 shipping??? not sure Rolling chassis with 12 bolt rear axle, 5 lug disc brake conversion with all new parts, cab needing floors, stepside bed needing wood and fenders, rust free hood, boxes of misc. stuff, core support, non air heat set up, extra door glass, and regulators, auto non tilt column, wiper motor, factory auto crossmember.... $600.00 obo Heater contol head, dirty and needs 1 knob, but works $25.00 +shipping Power steering gearbox $100.00 +shipping Attached Images

04-03-2008, 01:46 AM	#2
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring More pics Attached Images

04-03-2008, 01:51 AM	#4
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring more still Attached Images

04-03-2008, 02:09 AM	#5
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: More 69 C-10 parts, fenders, motor mounts,wiring Is that rolling chassis a short bed, and does it come with title? __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

04-03-2008, 02:20 AM	#6
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: More 69 C-10 parts, fenders, motor mounts,wiring Is that rolling chassis a short bed, and does it come with title? __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

04-03-2008, 01:51 AM	#3
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: More 69 C-10 parts, fenders, motor mounts,wiring Stepside taillights with brackets a pair $10.00 plus shipping Any cracks or chips? And total shipped to 37918 please..Thanks

04-03-2008, 02:39 AM	#7
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring Yes the title is clear and comes with the chassis, yes it is a short bed 2wd

04-03-2008, 05:44 PM	#8
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: More 69 C-10 parts, fenders, motor mounts,wiring Have they been sold??

04-03-2008, 06:43 PM	#9
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring No I still have everything in this post Cyclone, are you still interested in the mounts?

04-03-2008, 10:50 PM	#10
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: More 69 C-10 parts, fenders, motor mounts,wiring At the top of this Thread in post #3 I ask about the tail lights...

04-05-2008, 03:36 AM	#11
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Re: More 69 C-10 parts, fenders, motor mounts,wiring Passenger side fender with shipping to 23462 In Virginia? Do you have a good right side door? __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

04-05-2008, 04:27 AM	#12
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring Wootdog, its expensive, $36.00 bucks round about guessing at weight on DHL website

04-06-2008, 02:27 AM	#13
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring bump

04-06-2008, 05:17 PM	#14
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: More 69 C-10 parts, fenders, motor mounts,wiring Wootdog, you still interested in the fender?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.