Pics plus electric fan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Figment412 · 04-05-2008, 04:17 PM

I got my electrica fan setup done based on this post another cheap electric fan build! . The fan will be controlled by a SPAL programmable controller. Here are a few more progress pics. I started this truck in 2000 and I just started working on it again. It is a little bit of a 68 and 72 GMC along with a 74 Chevy.

Putter · 04-05-2008, 04:37 PM

Nice.
Oh, by the way, you have a headlight out.

Shyguy · 04-05-2008, 04:53 PM

Looks real good so far.

Danny

BACKYARD88 · 04-05-2008, 05:50 PM

Clean install, I like it

TonyJohnson · 04-05-2008, 05:54 PM

Sweet.

RJGeister · 04-06-2008, 05:50 AM

Nice and clean. Did you think of writing this up for the Faq section? Wold be a nice mod for anyone to do.

Rich

70GMCer · 04-06-2008, 02:41 PM

Quote:

Originally Posted by RJGeister

Nice and clean. Did you think of writing this up for the Faq section? Wold be a nice mod for anyone to do.

Rich

already in the FAQ. Write up was done. Installed mine a while back. Works great.

**Boog** · 04-06-2008, 02:55 PM

In a recent thread concerning using that Jeep fan and towing the poster noted his temps were up using this fan only. A Jeep mechanic said the Jeeps use that fan only for normal applications and that fan plus an engine driven fan are used together on Jeeps with a towing package. Worth keeping in mind for anyone who might be doing some extended towing and depending on this fan to keep it all cool.

Real nice installation here though. Your attention to the mounts is great.

RJGeister · 04-07-2008, 07:44 PM

Quote:

Originally Posted by 70GMCer

already in the FAQ. Write up was done. Installed mine a while back. Works great.

The origional posting has the fan mounting from the inside of the shroud. This one is mounted from the outside and looks much cleaner. The mounting difference could be added to the original post to give folks a choice of mounting options.

420am · 04-06-2008, 06:12 AM

I'd so be doing this if I had a fan shroud. lol.

ed2552 · 04-06-2008, 06:21 AM

Is that your shop? I like it, we have a similar lift in our shop, but ours is Asymmetric

TonyJohnson · 04-07-2008, 11:35 PM

I agree this is a cleaner mounting. Very nice.

xmitsu10 · 04-08-2008, 03:07 AM

I have the fan and plan to do this in the next few months as well. I like the mounting setup you have too. Looks like you slotted the shroud and used some rubber spacers for the two upper mounts. Correct? Did you make or buy the rubber block spacers? And that bracket on the bottom, did you fab that up as well?

Mark

420am · 04-13-2009, 05:35 PM

A bump since I'm ordering this right now.
Here's where I'm getting it from, I called and confirmed that they have it.

http://www.trademotion.com/partlocat...&siteid=214583

Just enter the part number and select jeep in the drop down menu.

67ChevyRedneck · 04-13-2009, 06:26 PM

Quote:

Originally Posted by 420am

A bump since I'm ordering this right now.
Here's where I'm getting it from, I called and confirmed that they have it.

http://www.trademotion.com/partlocat...&siteid=214583

Just enter the part number and select jeep in the drop down menu.

Thanks for that! I was having trouble with the "moparparts.com" website everyone else was using. I would create a user account with all my info, but it would never let me log in to check out. I tried a couple different times and nada. Never had that problem before, so I gave up. Their price plus shipping is almost exactly the same.

420am · 04-13-2009, 06:36 PM

Quote:

Originally Posted by 67ChevyRedneck

Thanks for that! I was having trouble with the "moparparts.com" website everyone else was using. I would create a user account with all my info, but it would never let me log in to check out. I tried a couple different times and nada. Never had that problem before, so I gave up. Their price plus shipping is almost exactly the same.

I had the exact same issue. Then I ordered it from another place and got an email back telling me they don't sell recall parts and that my order was canceled. So, that's why I called this last place to confirm.

Happy to help out a fellow Jesse James.. how odd is that?

67ChevyRedneck · 04-13-2009, 08:08 PM

Quote:

Originally Posted by 420am

I had the exact same issue. Then I ordered it from another place and got an email back telling me they don't sell recall parts and that my order was canceled. So, that's why I called this last place to confirm.

Happy to help out a fellow Jesse James.. how odd is that?

I'm glad I wasn't the only one. I got pretty miffed I couldn't buy the stupid fan and gave up

Jesse James is my first and middle name. My pops named me.

420am · 04-13-2009, 08:12 PM

Quote:

Originally Posted by 67ChevyRedneck

Jesse James is my first and middle name. My pops named me.

ditto.

420am · 04-13-2009, 05:47 PM

Part number is: CBG4F250

Since I can't seem to edit my posts.

bigguy69 · 04-13-2009, 06:17 PM

I am wanting the do the same thing. the only problem i seem to have is i cant seem to get my fan shroud to fit my truck. it has a v8 in the v8 location(sbc 350). it has long water pump and sepertine pulleys off of a newer truck.it hits the bottom pulley. do i need to trim the shroud to have enough room or do ihave the wrong shroud? where there different ones? sorry about the long post. this shroud came off a 68 chevy truck.

420am · 04-13-2009, 06:37 PM

Quote:

Originally Posted by bigguy69

I am wanting the do the same thing. the only problem i seem to have is i cant seem to get my fan shroud to fit my truck. it has a v8 in the v8 location(sbc 350). it has long water pump and sepertine pulleys off of a newer truck.it hits the bottom pulley. do i need to trim the shroud to have enough room or do ihave the wrong shroud? where there different ones? sorry about the long post. this shroud came off a 68 chevy truck.

Sounds like the wrong shroud. Do you have a photo of it?

420am · 04-24-2009, 06:34 PM

Quote:

Originally Posted by bigguy69

I am wanting the do the same thing. the only problem i seem to have is i cant seem to get my fan shroud to fit my truck. it has a v8 in the v8 location(sbc 350). it has long water pump and sepertine pulleys off of a newer truck.it hits the bottom pulley. do i need to trim the shroud to have enough room or do ihave the wrong shroud? where there different ones? sorry about the long post. this shroud came off a 68 chevy truck.

Just fit mine up. I can tell you the truck in the photos above does NOT have a short waterpump in it. lol. It's incredibly tight on a truck with a long waterpump. Like 1/16" kind of tight. Mine will fit but I think I'm going to do some cutting on the fan mounting tabs or the shroud to get a little more clearance. It looks like I can get another 1/4" or so. This is without serpentine belts. So, I'd say it will not work for your application.

bigguy69 · 04-13-2009, 06:40 PM

i will see if i can get one

bigguy69 · 04-24-2009, 07:00 PM

thanks for the heads up! im not sure if i can trim mine that much and get the fan to work.

Figment412 · 06-16-2009, 02:49 PM

Sorry I forgot about this thread. This does have a short water pump on it, but this truck used to have a v-6 so it is not stock at all. I will have to keep an eye on the engine temps once I get this running but it is pretty impressive so far. You can drop a piece of paper a few inches away and it will suck it to the radiator.

04-05-2008, 04:17 PM	#1
Figment412 Registered User Join Date: Dec 2002 Location: Fort Wayne, IN Posts: 108	Pics plus electric fan I got my electrica fan setup done based on this post another cheap electric fan build! . The fan will be controlled by a SPAL programmable controller. Here are a few more progress pics. I started this truck in 2000 and I just started working on it again. It is a little bit of a 68 and 72 GMC along with a 74 Chevy. __________________ Save your money and do it right the first time. 1968 GMC short bed 1972 Cab 74 SB Chevy running gear

04-05-2008, 04:37 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Pics plus electric fan Nice. Oh, by the way, you have a headlight out. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-05-2008, 04:53 PM	#3
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Pics plus electric fan Looks real good so far. Danny

04-05-2008, 05:50 PM	#4
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Pics plus electric fan Clean install, I like it __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

04-05-2008, 05:54 PM	#5
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: Pics plus electric fan Sweet. __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --

04-06-2008, 05:50 AM	#6
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Pics plus electric fan Nice and clean. Did you think of writing this up for the Faq section? Wold be a nice mod for anyone to do. Rich

04-06-2008, 02:55 PM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: Pics plus electric fan In a recent thread concerning using that Jeep fan and towing the poster noted his temps were up using this fan only. A Jeep mechanic said the Jeeps use that fan only for normal applications and that fan plus an engine driven fan are used together on Jeeps with a towing package. Worth keeping in mind for anyone who might be doing some extended towing and depending on this fan to keep it all cool. Real nice installation here though. Your attention to the mounts is great. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

04-06-2008, 06:12 AM	#10
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Pics plus electric fan I'd so be doing this if I had a fan shroud. lol. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

04-06-2008, 06:21 AM	#11
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Pics plus electric fan Is that your shop? I like it, we have a similar lift in our shop, but ours is Asymmetric __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

04-07-2008, 11:35 PM	#12
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: Pics plus electric fan I agree this is a cleaner mounting. Very nice. __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --

04-08-2008, 03:07 AM	#13
xmitsu10 Registered User Join Date: Aug 2006 Location: Alton, New Hampshire Posts: 274	Re: Pics plus electric fan I have the fan and plan to do this in the next few months as well. I like the mounting setup you have too. Looks like you slotted the shroud and used some rubber spacers for the two upper mounts. Correct? Did you make or buy the rubber block spacers? And that bracket on the bottom, did you fab that up as well? Mark __________________ 71 Cheyenne SWB

04-13-2009, 05:35 PM	#14
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Pics plus electric fan A bump since I'm ordering this right now. Here's where I'm getting it from, I called and confirmed that they have it. http://www.trademotion.com/partlocat...&siteid=214583 Just enter the part number and select jeep in the drop down menu. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

04-13-2009, 05:47 PM	#19
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Pics plus electric fan Part number is: CBG4F250 Since I can't seem to edit my posts. __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

04-13-2009, 06:17 PM	#20
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pics plus electric fan I am wanting the do the same thing. the only problem i seem to have is i cant seem to get my fan shroud to fit my truck. it has a v8 in the v8 location(sbc 350). it has long water pump and sepertine pulleys off of a newer truck.it hits the bottom pulley. do i need to trim the shroud to have enough room or do ihave the wrong shroud? where there different ones? sorry about the long post. this shroud came off a 68 chevy truck. __________________ members met: redbaron69, billsbowtie,nc67

04-13-2009, 06:40 PM	#23
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pics plus electric fan i will see if i can get one __________________ members met: redbaron69, billsbowtie,nc67



Register or Log In To remove these advertisements.

04-24-2009, 07:00 PM	#24
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pics plus electric fan thanks for the heads up! im not sure if i can trim mine that much and get the fan to work. __________________ members met: redbaron69, billsbowtie,nc67

06-16-2009, 02:49 PM	#25
Figment412 Registered User Join Date: Dec 2002 Location: Fort Wayne, IN Posts: 108	Re: Pics plus electric fan Sorry I forgot about this thread. This does have a short water pump on it, but this truck used to have a v-6 so it is not stock at all. I will have to keep an eye on the engine temps once I get this running but it is pretty impressive so far. You can drop a piece of paper a few inches away and it will suck it to the radiator. __________________ Save your money and do it right the first time. 1968 GMC short bed 1972 Cab 74 SB Chevy running gear

Register or Log In To remove these advertisements.