I need a picture of the wiper motor installed

[jugernot]

I need a picture of the wiper motor with the harness connector attached. I'm trying to connect mine to my painless harness and need to know which led or terminal connects to the fuse block (power ) and which led terminals go to the switch.

Thanks

[TravisH]

Heres a couple threads that helped me recently:

http://67-72chevytrucks.com/vboard/s...t=wiper+wiring
http://67-72chevytrucks.com/vboard/s...d.php?t=260592

[jugernot]

Originally Posted by TravisH

Heres a couple threads that helped me recently:

http://67-72chevytrucks.com/vboard/s...t=wiper+wiring
http://67-72chevytrucks.com/vboard/s...d.php?t=260592

Thanks, that will work.

[jugernot]

Wow, Thanks to a thread written three years ago I was able to complete my wiper switch wiring in about 20 minutes and I even salvages the OEM connector plug housings (I used new connectors). Thanks to TravisH for providing me with a link to the thread and thanks to Putter, it was his response to the thread that helped the most.

Link to thread.

http://67-72chevytrucks.com/vboard/s...t=wiper+wiring

[VetteVet]

Here's a schematic that shows how to wire the switch and if you click on the sticky at the top of the electrical forum titled (Wiring diagram finished), and scroll down to post 19 it shows a nice wiring diagram with wire colors and where they go. The important thing to remember is that the motor is wired hot to the ignition switch and the controls are grounded through the wiper motor switch. IOW the wiper switch selects the wiper speed
by grounding the wires not by hot positive wiring. HTH
http://rmcavoy.freeshell.org/electrical.html