|
04-28-2008, 09:00 PM | #1 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Hiddin Hitch
Got the hitch all set up and ready to go this weekend. Well the truth is I installed the hitch last summer. But just got all the wiring done the way I wanted it. Took off the old rusty 7 pin and installed this 7 pin 4 pin combo. Worked out just as I wanted it. Did a little polishing on the bumper while I was there and got a picture of the new exhaust while I was at it. Going to tow my boat about 2 and a half hours to a boat meet this weekend. Wife will drive it. I'll have to drive the Dually towing the 5er.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-28-2008, 09:01 PM | #2 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Hiddin Hitch
Couple more set up ready to go!
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-28-2008, 09:03 PM | #3 |
Skinned knuckles
Join Date: Oct 2006
Location: Longview, Washington
Posts: 1,126
|
Re: Hiddin Hitch
I don't see no hitch.. I guess that's the idea... Looks great! I want to do the same thing someday. Did you build it, or find it this way?
__________________
'72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904 |
04-28-2008, 09:07 PM | #4 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Hiddin Hitch
Got the hitch from early classics. The wiring stuff came from advanced auto.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-28-2008, 10:19 PM | #5 |
Moderator
Join Date: May 2007
Location: Southern Cal
Posts: 20,031
|
Re: Hiddin Hitch
That is nice! Do you know if the hidden hitch will work if you have relocated a Blazer tank underneath your truck?
|
04-28-2008, 11:32 PM | #6 |
Registered User
Join Date: Nov 2002
Location: Charleston, South Carolina
Posts: 1,370
|
Re: Hiddin Hitch
Great job! I like how the plug still hides under the plate. I might have to steal your idea for my hidden hitch wiring.
__________________
2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina |
04-28-2008, 11:53 PM | #7 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: Hiddin Hitch
That looks great. Leddzepp, ECE has a picture of the hitch installed on a 2wd Blazer.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
04-28-2008, 11:54 PM | #8 |
Registered User
Join Date: Aug 2007
Location: FOREST MS
Posts: 67
|
Re: Hiddin Hitch
looks good i need one of those
|
04-29-2008, 12:01 AM | #9 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Hiddin Hitch
Looks like a blazer tank should fit. The 4 pin connector and the insert came with the hitch. I thought it was a pretty good deal as the kit. There was just enough room between the plate cradle and the hich for the wires. I was concerned about getting to the hitch pin, but works really well. I added the 7 pin because I have a 5 pin on my boat and I have a 7 to 5 adapter. Liked having the 4 pin there also for a small trailer I have. I'm getting excited, after 7 years owning the truck I'm finnally making some headway.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-29-2008, 12:45 AM | #10 |
Moderator
Join Date: May 2007
Location: Southern Cal
Posts: 20,031
|
Re: Hiddin Hitch
71SWB...Where is that pic? I cannot find it on their website....
|
04-29-2008, 01:18 AM | #11 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: Hiddin Hitch
leddzepp, it's on their catalog. I will try to find it and scan it in for you. It's a pretty cool picture actually.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
04-29-2008, 01:24 AM | #12 |
Moderator
Join Date: May 2007
Location: Southern Cal
Posts: 20,031
|
Re: Hiddin Hitch
Thanks 71SWB, if you cannot find it, don't worry. I am going to keep looking for the pic too
|
04-29-2008, 01:29 AM | #13 |
Registered User
Join Date: Jun 2007
Location: Boca Raton, FL
Posts: 476
|
Re: Hiddin Hitch
I want one!
__________________
Joe |
04-29-2008, 01:44 AM | #14 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: Hiddin Hitch
Here is the ECE picture. Click on it for a bigger image.
wnc mountain, it looks like you have quite the boat too. We need a picture of the rig all hooked up and ready to go.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
04-29-2008, 01:56 AM | #15 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Hiddin Hitch
There is a different part for the Blazer and truck but I would think the tank will still fit. Call ECE and I'm sure they can tell you for sure.
I will get a pic of the rig all hooked up I ment to take one yesterday on the test run. The old memory banks don't work like they used to.
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-29-2008, 06:14 AM | #16 |
Always wrenching!!
Join Date: Apr 2007
Location: Sacramento, CA
Posts: 301
|
Re: Hiddin Hitch
I did the same thing with mine........
__________________
71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress |
04-29-2008, 06:16 AM | #17 |
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Re: Hiddin Hitch
Yes the tank will fit. as a matter of fact that is what I just came in from working on. i need to drill 4 holes real quick and I will be done. i will take some pics in the morning.
WNC where did you get that combination plug at? I like it! Shawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE Last edited by jorgensensc; 04-29-2008 at 06:19 AM. |
04-29-2008, 06:59 AM | #18 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: Hiddin Hitch
ECE has different hitches for the blazer/burbs & trucks. The rear mount gas tank requires the 'arms' of the blazer/burb hitch to be slightly shorter vs. the truck to avoid interference w/the gas tank mounting straps.
I also learned that on the trucks, they use the same P/N regardless if it's a leaf or coil frame. And w/slight modification, it can be installed in a later model GM truck as well.....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 04-29-2008 at 07:03 AM. |
04-29-2008, 02:33 PM | #19 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Hiddin Hitch
I still have mine setting on the garage floor. I might install it one day.
__________________
1997 GMC Sierra Ext 1965 Mustang |
04-30-2008, 03:34 AM | #20 |
Registered User
Join Date: Aug 2005
Location: Texas
Posts: 239
|
Re: Hiddin Hitch
Where did you buy the hidden hitch? and how much total was it?
|
04-30-2008, 04:42 PM | #21 |
More hobbies than money!
Join Date: Jan 2002
Location: Raleigh, nc, usa
Posts: 655
|
Re: Hiddin Hitch
Here is the info straight from Early Classic:
Hidden Receiver Hitch Kits Want to tow with your Classic without that ugly hitch hanging below your bumper? Our new Class 4 Hidden Receiver Hitch is just the answer. Designed for use with the stock '67-’72 factory rear bumper, simply flip up the rear license plate and insert the coupler. It’s that easy. We now offer the hitch components in a package deal: Hidden Receiver Hitch, Extended Ball Mount, License Plate Flip Frame and Flat Four Trailer Wiring. Our new Blazer and Suburban hitches are also finished and in stock, and feature the same quality design and powder-coated finish as our Pickup version. Drilling is required for installation, and every hitch comes with all needed hardware. -------------------------------------------------------------------------------- Options: #906-6772BHPU - '67-'72 Pickup -- $209.00 #906-6772BHSUB - '67-'72 Suburban w/o Wiring Harness -- $209.00 #906-6772BHBLZ - '69-'72 Blazer -- $209.00 Quantity:
__________________
'70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project |
04-30-2008, 07:41 PM | #22 |
Gettin By on Gettin By
Join Date: Jan 2008
Location: Cedar Creek, Tx
Posts: 1,033
|
Re: Hiddin Hitch
Have to subscribe to this so i don't loose it. Very cool idea. Looks great.
__________________
69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" |
04-30-2008, 08:00 PM | #23 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: Hiddin Hitch
I've had this set-up on my 68 since 2000. It works great w/o even knowing it's there.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
04-30-2008, 08:17 PM | #24 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Hiddin Hitch
I went with a normal receiver hitch that just sticks out below my license plate (only cost $35 vs. $200) but really like the idea for the plug. I might have to get a flip license plate bracket and go that route...
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 04-30-2008 at 08:18 PM. |
04-30-2008, 08:30 PM | #25 |
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,038
|
Re: Hiddin Hitch
I made one out of tube steel for my 70 and added a steel trailer plug from NAPA. MY truck has a blazer tank and there was plenty room for the hitch.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. Last edited by lts70; 04-30-2008 at 08:42 PM. |
Bookmarks |
|
|