thinking about a blazer now!price ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-04-2002, 12:27 AM

Well I found a 72 Blazer CST 4x4, AT, 305 with HEI, AC, Cruise, neither work, buckets and console, rear seat, ralleys with caps and rings, new floor pans and rockers, top is good, hatch is bad and rust in tailgate, body has some rust on it and has been fixed before. Different doors on it with rust in very corners. Grill, bumper and hood are real good. It sounded pretty good, I didn't get to drive it yet but he said it drove fine and the 4x4 is in good shape. I think I can get it for $2200 is this to much? I've never had a blazer it might look good with the burb and 67 swb. THANKS any help is appreciated. Randy

Dan69 step · 11-04-2002, 08:36 AM

For another $6K you could buy my 72 2wd Blazer that is already done . Has a nice 350 (instead of that crappy 305), no a/c or cruise, but at least all of the work has been done, alot of new sheetmetal and no rust. But if it's a 4x4 you're looking for, rule of thumb is " $1K for the 4x4, another $500 if it at least runs".

neonlarry · 11-04-2002, 02:49 PM

Well, a blazer in almost any condiiton is worth at least 1k, for a drivable one $2200 doesn't sound bad at all.

Slick71 · 11-04-2002, 04:22 PM

I just sold a 72 Blazer with 4" Suspension and 3" body lift for $1500. Mine was pretty rusty(floors, rockers, windshield frame) but ran very well with a built 350 and 3/4 ton axles. Just something for you to compare with. $2200 sounds like going rate for an average blazer but definitely not a bad price.

**'68OrangeSunshine** · 11-04-2002, 04:24 PM

That's not a bad price for an entry level 1st Gen K/5. You may want to R&R the 305 for a 350, when the time comes. Be sure to check for bad rust at the windshield frame upper corners. This is an expensive fix as a whole other K/5 body has to be sacrificed to get good A pillar/ windshield header joints. [I learned about that the hard way, letting my enthusiasm for a bright blue '71 Jimmy carry me away.LOL]
I have a '68 C/10 stepsde and a '67 K/10 Sub -- the K/5 is the most fun to drive.
Good Luck

teeitup · 11-05-2002, 09:12 PM

Well I passed on it he's had it advertised for 2 weeks and I'm the only one that has looked at it. I'm going to let him set on it a day or two. I think I can get it for $1800 but it needs alot of stuff. Needs a whole steering column (I have one already) Body wasn't in the best shape but I've seen worse, windshield frame was good. Hood, grill and bumper were good so If I were to fix it I would need a whole outer body. I can't make up my mind, the wife says buy it if I want it but I don't know how bad I want it, bad feeling. The rear driveshaft was on backwards but he said its always been that way. Its been sitting for 4 years and I can't figure out why he wasn't driving it. It drove Ok and the 4x4 worked fine. You can't open rear hatch or it will fall apart. Oh well I'm debating! Thanks for the input!!! Randy

11-04-2002, 12:27 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	thinking about a blazer now!price ??? Well I found a 72 Blazer CST 4x4, AT, 305 with HEI, AC, Cruise, neither work, buckets and console, rear seat, ralleys with caps and rings, new floor pans and rockers, top is good, hatch is bad and rust in tailgate, body has some rust on it and has been fixed before. Different doors on it with rust in very corners. Grill, bumper and hood are real good. It sounded pretty good, I didn't get to drive it yet but he said it drove fine and the 4x4 is in good shape. I think I can get it for $2200 is this to much? I've never had a blazer it might look good with the burb and 67 swb. THANKS any help is appreciated. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-04-2002, 08:36 AM	#2
Dan69 step Registered User Join Date: Nov 2000 Location: Fullerton,NE Posts: 380	For another $6K you could buy my 72 2wd Blazer that is already done . Has a nice 350 (instead of that crappy 305), no a/c or cruise, but at least all of the work has been done, alot of new sheetmetal and no rust. But if it's a 4x4 you're looking for, rule of thumb is " $1K for the 4x4, another $500 if it at least runs". __________________ 69 short step 68 50th Anniversary Gold/ White lwb 72 2wd Blazer 63 Studebaker Avanti 85 Avanti 66 Studebaker Cruiser 49 Studebaker pickup 3-49 Studebaker 1 1/2 truck 94 White/ GMC coe (cabin hauler) 95 chev 2015 chev Duramax 2500

11-04-2002, 02:49 PM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Well, a blazer in almost any condiiton is worth at least 1k, for a drivable one $2200 doesn't sound bad at all. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

11-04-2002, 04:22 PM	#4
Slick71 Registered User Join Date: Feb 2001 Location: Savannah, MO. Posts: 513	I just sold a 72 Blazer with 4" Suspension and 3" body lift for $1500. Mine was pretty rusty(floors, rockers, windshield frame) but ran very well with a built 350 and 3/4 ton axles. Just something for you to compare with. $2200 sounds like going rate for an average blazer but definitely not a bad price. __________________ 1972 Chevy Blazer 4X4 Savannah, MO. www.thefarmatadair.com

11-05-2002, 09:12 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Well I passed on it he's had it advertised for 2 weeks and I'm the only one that has looked at it. I'm going to let him set on it a day or two. I think I can get it for $1800 but it needs alot of stuff. Needs a whole steering column (I have one already) Body wasn't in the best shape but I've seen worse, windshield frame was good. Hood, grill and bumper were good so If I were to fix it I would need a whole outer body. I can't make up my mind, the wife says buy it if I want it but I don't know how bad I want it, bad feeling. The rear driveshaft was on backwards but he said its always been that way. Its been sitting for 4 years and I can't figure out why he wasn't driving it. It drove Ok and the 4x4 worked fine. You can't open rear hatch or it will fall apart. Oh well I'm debating! Thanks for the input!!! Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-04-2002, 04:24 PM	#5
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,517	That's not a bad price for an entry level 1st Gen K/5. You may want to R&R the 305 for a 350, when the time comes. Be sure to check for bad rust at the windshield frame upper corners. This is an expensive fix as a whole other K/5 body has to be sacrificed to get good A pillar/ windshield header joints. [I learned about that the hard way, letting my enthusiasm for a bright blue '71 Jimmy carry me away.LOL] I have a '68 C/10 stepsde and a '67 K/10 Sub -- the K/5 is the most fun to drive. Good Luck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.