|
|
|
05-22-2008, 01:28 AM
|
#1 |
|
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
Gas filler patch
I was planning on moving the gas tank out of the cab. Anyone know if a vendor is making a patch for the filler neck hole? I've done some searches, but came up dead so far.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71  Long Fleet C/10 72  Jimmy 4x4 (Junkyard Jimmy)HG's Plow Truck '78  K35 DuallyBigass Farm Truck HG's thread of miscellaneous stuff |
|
|
|
05-22-2008, 01:55 AM
|
#2 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Gas filler patch
PM Infanti. There Board Members/Vendors here. Good Luck, Harry
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
|
|
05-22-2008, 03:32 AM
|
#3 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,766
|
Re: Gas filler patch
I have them made here localy. They are cut flat though and you have to do the contouring yourself. They are in my on-line catolog. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
05-22-2008, 05:22 AM
|
#4 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: Gas filler patch
Here's infanti's ebay link...check out his other items for other patch panels
http://cgi.ebay.com/ebaymotors/67-72...QQcmdZViewItem |
|
|
|
|
05-22-2008, 06:31 AM
|
#5 | |
|
Trucks N Tranzams
Join Date: Dec 2002
Location: North Las Vegas, Nevada
Posts: 816
|
Re: Gas filler patch
Quote:
__________________
 Don'68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately" Last edited by Arad68; 05-22-2008 at 06:33 AM. |
|
|
|
|
|
05-22-2008, 07:07 AM
|
#6 | |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: Gas filler patch
Quote:
|
|
|
|
|
|
05-22-2008, 07:30 AM
|
#7 |
|
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
Re: Gas filler patch
Thanks everyone. Much appreciated.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy)HG's Plow Truck '78 K35 DuallyBigass Farm Truck HG's thread of miscellaneous stuff |
|
|
|
|
05-22-2008, 02:13 PM
|
#8 |
|
Registered User
Join Date: Jan 2004
Location: Mid-Michigan
Posts: 178
|
Re: Gas filler patch
Can anybody guide me towards no-weld patch panels?
I have contacted Infanti - since there is no overlap, they must be welded. I was going to use epoxy - any suggestions? |
|
|
|
|
05-22-2008, 03:57 PM
|
#9 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: Gas filler patch
my suggestion would be to weld. even if you have to borrow a friends welder. if you were to overlap, even the gas filler, you're going to have to spread a lot of mud to make it even.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
