Electrical Junction block on Passenger fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968SWBBigBlock · 06-07-2008, 08:22 AM

I have a 68 and need to remember what wire(s) go into this block.
It would look like I have one wire that connects for the alternator and one that has a 10 amp glass fuse in it that may not be original.

Thoughts and photos would be awesome

1968SWBBigBlock · 06-07-2008, 08:07 PM

ttt

*72lb4x4* · 06-07-2008, 08:42 PM

Also, the fusible link from the battery connects to the junction.
The black wire with the fuse belongs there.

**VetteVet** · 06-07-2008, 11:50 PM

Found these

Riveted1 · 06-08-2008, 04:20 AM

If you're not going for original, you can put whatever you want there. Just my .02....

06-07-2008, 08:22 AM	#1
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Electrical Junction block on Passenger fender I have a 68 and need to remember what wire(s) go into this block. It would look like I have one wire that connects for the alternator and one that has a 10 amp glass fuse in it that may not be original. Thoughts and photos would be awesome __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-07-2008, 08:07 PM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Electrical Junction block on Passenger fender ttt __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-07-2008, 08:42 PM	#3
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: Electrical Junction block on Passenger fender Also, the fusible link from the battery connects to the junction. The black wire with the fuse belongs there.

06-07-2008, 11:50 PM	#4
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,718	Re: Electrical Junction block on Passenger fender Found these Attached Images __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

06-08-2008, 04:20 AM	#5
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Electrical Junction block on Passenger fender If you're not going for original, you can put whatever you want there. Just my .02.... __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.