|
06-14-2008, 03:48 PM | #1 |
Registered User
Join Date: Feb 2008
Location: Langley, BC
Posts: 29
|
Wheel hop
I just replaced my 308 posi with a set of 411's, and now have a bad case of wheel hop. My truck is a long box with leaf springs. Does any one know how to STOP the HOP
__________________
71 GMC LWB GMPP Fast Burn 385 crate engine, T-350, Factory A/C, tilt, gauges, buckets and console changed to houndstooth bench, 411 posi. Click Here for pictures |
06-14-2008, 05:01 PM | #2 | |
Registered User
Join Date: Oct 2006
Location: Arizona
Posts: 835
|
Re: Wheel hop
Quote:
BTW, it's becuase your leaf springs are "wrapping up" when you get on it. Coil spring trucks don't have this problem.
__________________
67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094 |
|
06-14-2008, 05:34 PM | #3 |
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Wheel hop
An old school method was to install a set of Air Lift air springs....drag racers would preload them, to offset the side that would hop. The old ads showed them burning rubber with both tires with nothing more than the Air Lifts installed.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
06-14-2008, 11:40 PM | #4 |
Registered User
Join Date: Dec 2005
Location: White Rock Canada
Posts: 865
|
Re: Wheel hop
I had the same problem, believe it or not, when I put my Gaylord's tonneau cover on (100 lbs.) it completely stopped.
__________________
1972 GMC Sierra 1972 GMC Super Custom Suburban |
06-15-2008, 01:57 AM | #5 |
Registered User
Join Date: May 2007
Location: Winnipeg Manitoba
Posts: 59
|
Re: Wheel hop
i got it also blew up 1 yoke and 2 ddrive shafts. i'm geting tration bars built that wil lride on the frame and i'm gonna lock up the front springs
|
06-15-2008, 03:37 AM | #6 |
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 57
|
Re: Wheel hop
If both of your shocks are mounted in front of the rear end, then you can remove one from the front and place it behind the rear end. You will have to make new brackets. Alot of people do it to 4x4's so you don't get wheel hop on rough roads. Your case probably needs traction bars, but every little bit helps.
|
06-15-2008, 09:39 AM | #7 |
Registered User
Join Date: Feb 2008
Location: Langley, BC
Posts: 29
|
Re: Wheel hop
Thanks guys, I was hoping for something a little more discreet than old school traction bars.
I have a soft tonneau right now. I will look at the shock set up today. Has anyone heard of a "hotchkis setup"?
__________________
71 GMC LWB GMPP Fast Burn 385 crate engine, T-350, Factory A/C, tilt, gauges, buckets and console changed to houndstooth bench, 411 posi. Click Here for pictures |
Bookmarks |
|
|