anybody know where this gauge cluster is from? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

allen123 · 06-19-2008, 12:19 AM

sdkid · 06-19-2008, 12:45 AM

I think the panel is from covans. The gauges are from any summit, jegs type place.

Shak · 06-19-2008, 12:52 AM

That's correct - Covan Classics

chevy72blu · 06-19-2008, 12:52 AM

Covan's classic. A buddy of mine bought a whole cluster from them for his 73' camaro and it looked like crap for the price, IMO. Cheaply made plastic and poor quality control.

**special-K** · 06-19-2008, 05:34 AM

Star Wars movie set?

bad6772 · 06-19-2008, 06:14 AM

correct me if i am wrong,but that dash looks like a NO LIMIT engineering piece.....almost certain of it.........

jkade · 06-19-2008, 08:13 AM

covans and it is junk!!!

fatboys69 · 06-19-2008, 09:27 AM

I have one in mine, the first one didn't fit ( the mount holes were off ), they shipped me another one ( told me to keep the first one ), and it fit perfect.
Got my gauges from Summitt. Autometer Ultralite II's and made my own wire harness.

**LockDoc** · 06-19-2008, 11:17 AM

-
There is a thread on here somewhere about a guy that was machining them from billett (two actually) one is so-so and one is awesome.... Maybe someone will post up a link, I didn't save it.

LockDoc

*Shane* · 06-19-2008, 12:29 PM

I've been looking at the Covan's but have wondered if they are truly worth the selling price? Seems kinda pricey for a piece of ABS plastic ...

Any input fatboy?

p.s. I heard thru the grapevine they also made a glove box door cover to match the dash. So I mailed them and requested pics of the cover and they promptly emailed back and said they would send the pics right over, but have yet to receive any pics. That was almost a week ago.

**passthebuck** · 06-19-2008, 03:01 PM

I bought both dash & glovebox door here:

http://67-72chevytrucks.com/vboard/s...hlight=hubbard

& they look awesome. I've got some mods to do to make them unique, but they are truly works of art as they are.

**LockDoc** · 06-19-2008, 09:47 PM

Quote:

Originally Posted by passthebuck

I bought both dash & glovebox door here:

http://67-72chevytrucks.com/vboard/s...hlight=hubbard

& they look awesome. I've got some mods to do to make them unique, but they are truly works of art as they are.

That's the one I was talking about. Thanks for the link.

LockDoc

thirdstreettito · 06-19-2008, 03:06 PM

YearOne has one that looks better and is awesome.

*Shane* · 06-19-2008, 03:23 PM

Quote:

Originally Posted by thirdstreettito

YearOne has one that looks better and is awesome.

did a search at yearone.com and nothing comes up ... you got a link?

jb4short · 06-19-2008, 03:27 PM

Quote:

Originally Posted by Shane

did a search at yearone.com and nothing comes up ... you got a link?

I just ran through their new catalog...Covan, Dakota Digital and stock....nothing special

jb4short · 06-19-2008, 03:16 PM

I wish someone would copy Covans using billet aluminum

drunkbus · 06-19-2008, 03:25 PM

Just my opinion, but it looks like a step down from the original and expensive on top of that.

06-19-2008, 12:19 AM	#1
allen123 It'll buff out Join Date: Mar 2008 Location: Blanchard,Ok Posts: 1,376	anybody know where this gauge cluster is from? __________________ 1972 Chevy c10 swb 2008 CBR600RR Grafitti edition My Build Cody Allen

06-19-2008, 12:45 AM	#2
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: anybody know where this gauge cluster is from? I think the panel is from covans. The gauges are from any summit, jegs type place. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

06-19-2008, 12:52 AM	#3
Shak Registered User Join Date: May 2007 Location: Spring Valley, CA Posts: 49	Re: anybody know where this gauge cluster is from? That's correct - Covan Classics

06-19-2008, 12:52 AM	#4
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: anybody know where this gauge cluster is from? Covan's classic. A buddy of mine bought a whole cluster from them for his 73' camaro and it looked like crap for the price, IMO. Cheaply made plastic and poor quality control. __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

06-19-2008, 05:34 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: anybody know where this gauge cluster is from? Star Wars movie set? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-19-2008, 06:14 AM	#6
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: anybody know where this gauge cluster is from? correct me if i am wrong,but that dash looks like a NO LIMIT engineering piece.....almost certain of it.........

06-19-2008, 08:13 AM	#7
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: anybody know where this gauge cluster is from? covans and it is junk!!!

06-19-2008, 09:27 AM	#8
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: anybody know where this gauge cluster is from? I have one in mine, the first one didn't fit ( the mount holes were off ), they shipped me another one ( told me to keep the first one ), and it fit perfect. Got my gauges from Summitt. Autometer Ultralite II's and made my own wire harness. Attached Images

06-19-2008, 11:17 AM	#9
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,649	Re: anybody know where this gauge cluster is from? - There is a thread on here somewhere about a guy that was machining them from billett (two actually) one is so-so and one is awesome.... Maybe someone will post up a link, I didn't save it. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-19-2008, 12:29 PM	#10
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: anybody know where this gauge cluster is from? I've been looking at the Covan's but have wondered if they are truly worth the selling price? Seems kinda pricey for a piece of ABS plastic ... Any input fatboy? p.s. I heard thru the grapevine they also made a glove box door cover to match the dash. So I mailed them and requested pics of the cover and they promptly emailed back and said they would send the pics right over, but have yet to receive any pics. That was almost a week ago. Last edited by Shane; 06-19-2008 at 12:35 PM.

06-19-2008, 03:01 PM	#11
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: anybody know where this gauge cluster is from? I bought both dash & glovebox door here: http://67-72chevytrucks.com/vboard/s...hlight=hubbard & they look awesome. I've got some mods to do to make them unique, but they are truly works of art as they are. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

06-19-2008, 03:06 PM	#13
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: anybody know where this gauge cluster is from? YearOne has one that looks better and is awesome. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

06-19-2008, 03:16 PM	#16
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: anybody know where this gauge cluster is from? I wish someone would copy Covans using billet aluminum

06-19-2008, 03:25 PM	#17
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: anybody know where this gauge cluster is from? Just my opinion, but it looks like a step down from the original and expensive on top of that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.