Pulleys? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camaro41701 · 06-22-2008, 11:45 PM

I am trying to get all the brackets and pulleys together for a short water pump,power steering,smallblock.I am also installing vintage air,they said I would need a double groove power steering pump and three groove balancer pulley.I have done several of these trucks but usually use Billet Specialties v-trac kit.
This one is going to be a parts truck and daily driver so it will be a low budget.If anyone has a picture of their engine together I think I may have all the parts needed that was taken off of some other trucks.
Thanks

06-22-2008, 11:45 PM	#1
camaro41701 Registered User Join Date: Oct 2007 Location: Hazard,KY Posts: 40	Pulleys? I am trying to get all the brackets and pulleys together for a short water pump,power steering,smallblock.I am also installing vintage air,they said I would need a double groove power steering pump and three groove balancer pulley.I have done several of these trucks but usually use Billet Specialties v-trac kit. This one is going to be a parts truck and daily driver so it will be a low budget.If anyone has a picture of their engine together I think I may have all the parts needed that was taken off of some other trucks. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.