![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Member since 2000
Join Date: Dec 2000
Location: Mountain View Ca / Mexico
Posts: 7,879
|
Removing balljoints wihtout damaging them??
How can i do this, any tools that do it clean or should i just say "fk it" and bust them out and get me some new ones. i get discount. but dont really want to buy new one if i can get them out. these are new ball joint with very few miles on them. thanks
|
![]() |
![]() |
![]() |
#2 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
If you're worried about the rubber boot-I just use the end of the fork to get under it and then give it a good whack. I've never broken a boot this way. Just do it carefully and you should be fine.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
![]()
If I need to save/reuse the ball joints I support vehicle by the frame, remove cotter pins, back off on the castle nut a few turns, while leaving the control arm unsupported, turn the spindle to where I can give the area of the spindle where the joint passes through a couple of GOOD SHARP BLOWS with a BFH. This will break them loose without risk of damaging the boots, now support lower control arm and remove the nuts.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
![]() |
![]() |
![]() |
#4 |
Ain't we cute?
Join Date: May 2002
Location: Friendswood, TX
Posts: 700
|
Usually, you can remove the upper balljoints th way Gordo said. Mine were so stuck I HAD to use a fork and BFH. I just greased the fork real good and still got em out in one piece. Lowers, I think you'll have to get pressed out? Haven't done my lowers yet.
__________________
69 C10 2WD LWB Fleet 350/350 power front disc conversion (6 lug disc kit from gmcpauls) and new engine, PS, A/C, fresh fluids, SHE DRIVES! FOR SALE $3900 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|