7/13 edition what did you get done?

[old Rusty C10]

i didnt get too much done i have my lowe ball joints and randall sold me some bushings so this weekend i bought a ball joint press so next week maybe i can get the ball joints done on mine
How about yall?

[westie 666]

Spent most of the weekend cleaning my side trim but it still looks cloudy so I may take it to a metal polisher.

[impalamark]

Exhausted .
Saturday got taken up by home fix it responsibilities
some at my house some at my rental property
rained most of the day so kept me away from the trucks
Sunday up early hard at it sold some parts off the suburban
pulled the front clip wiring harnesses engine and trans seats
carpet dash rear windows to sell
good days work
Mark

[SSC's76]

Not too much went on a poker run saturday and just kinda chilled today probably get some work done on the truck next weekend. I need to figure out why the new fuel pump keeps blasting needle and seat in the q_jet .

[bad6772]

Drove 1,200 miles........Went to a Great Meet.....Met some cool People..

[N2TRUX]

I spent the weekend on the road. my first stop was in Corpus Christi on Friday for my state assocations trade show. I spent the day there testing new video games and checking the local scenery.

Saturday I left Corpus and headed South toward the border. We took a left across Laguna Madre and stopped on South Padre Island. We spent the last two days relaxing on the white sand of Padre beach.

Tomorrow it's a six hour drive home and back to reality.

My view at Corpus Christi-


Big waves at South Padre. Unfortunately they weren't this big when we were there-


Dinner at Louies Backyard grill-



This was taken from the deck at Louie's as the sun set over Laguna Madre-


And here is a fuzzy cell phone pic as we are leaving-

[texassquarebodies]

Saturday I cleaned up the yard and hauled off some scrap iron. Sunday, I bought another truck from craigslist and rebuilt my tbi for my crew cab.
Too many projects, never enough time.....

[Square84]

Originally Posted by texassquarebodies

Saturday I cleaned up the yard and hauled off some scrap iron. Sunday, I bought another truck from craigslist and rebuilt my tbi for my crew cab.
Too many projects, never enough time.....

got any pics of the burb in the last photo?

[N2TRUX]

The yard is looking good Tony. Love that trailer..

[lolife99]

Spent the day making "swiss cheese" of my bed floor. I needed to cut the holes for the huge axle notch, the driveshaft notch, upper 4 link bars and the fill neck for the fuel cell. I think I destroyed most of the crossmembers under the floor,... and still may not be done. These pics were taken with the axle 3" off the notch. So it will go lower! Gotta love the rear Dropmember. Now it's time to blow it apart for paint.

[72BlckButy]

Originally Posted by lolife99

Spent the day making "swiss cheese" of my bed floor. I needed to cut the holes for the huge axle notch, the driveshaft notch, upper 4 link bars and the fill neck for the fuel cell. I think I destroyed most of the crossmembers under the floor,... and still may not be done. These pics were taken with the axle 3" off the notch. So it will go lower! Gotta love the rear Dropmember. Now it's time to blow it apart for paint.

Keith, looks like things are coming together. I'll have to make it up there to check on the progress, lookin' good!

[texassquarebodies]

Porterbuilt is making a kit for the rear now???

[454HO]

I picked up an Edelbrock Performer 750cfm carb and installed it on the 454. Runs way better than the tired old Q-Jet I had on there. Idles like a dream, smooth with no surging. Some day I will send the Q-jet off to get reworked, but for now I need to get this truck drivable. I would really like to give up the storage unit I've been using as a shop at the end of this month.



The truck ran so good I decided to take the plunge and drive about a mile down to the convenience store and back. Luckily I didn't see any cops 'cause the inspection and registration are both expired.



Next on the list is a set of new tires. These have flat spots and dry rot from sitting so long. I've got a set of Impala SS rims I may use, or maybe just go with some rallys.

[bigblock73]

Spent the week "up north" with the family. Returned this weekend, only to leave again for another week (for work). Here is a pic of my daughter taken on our vacation, now 8 months old already.

Keith, progress looks sweet!

[S10Fan]

Originally Posted by bigblock73

Here is a pic of my daughter taken on our vacation, now 8 months old already.

She's Perfect!

[SCOTI]

I went to the GoodGuys show @ Columbus Ohio this week. We left @ 05:00 Wed morning & drove to Kentucky for the night; then got up & finished the trip to Columbus on Thurs morning.

The trip was great. My buddies each brought their kids & they're two of the best behaved young adults (13 & 18.... barely) I've ever been around. I'm glad to see them being involved in their dad's interests/hobbies (I never had anything like that w/my parents so it means a great deal to me especially).

We typically experience some sort of extreme issue but the trip was un-eventful. No flats. No mechanical issues w/the exception of a lug nut that was loose & fell off. We did learn not to use a brand new aluminum trailer (w/o any isulation barrier) w/a freshly completed vehicle (think giant alum toaster oven ).

Lots of cars, trucks, & people. Met board member c10addict & finally got to see how nice his truck was in person (super nice guy too). ALOT of driving (17hr road trip each way)..... but it was worth it.

The trip back was both cool..... and not so cool . N2Billets son (Trey) & I co-piloted a very nice 61 Buick Bubble-top back to DFW from Ohio. N2B is the 'broker' for the sale of the car & we helped transport it safely to TX where it will find its next owner. Big wheels, 4-whl air-ride, & C5 PBR brakes up front. The a/c worked; but because of a belt tension issue taxing the accessories, we elected to turn it off & toughed it out for 17 straight hours of driving. That's right..... this car was picked up on Sat afternoon & then driven the entire way back to DFW on Sunday stopping only for fuel. The final calculations are still out, but our collective number crunching @ the pumps indicated about 15+mpgs! Factory engine & 2spd auto trans . . .... it ran pretty decent for being 47yrs old. Trey (who turned 18 during our 17hr trip ) did a fine job on the road & learned from the experience (he asked questions & didn't complain ) . . ..... Scot.

[lolife99]

texassquarebodies,... Nate has had the 73-87 version of the rear Dropmember done for a while now. I think the 67-72 version is about ready for production. All Nates products are heavy duty and high quality. But,... he makes it look easy in his threads.
Jeff,... great pic of your daughter!

[N2TRUX]

Jeff your daughter is absolutly adorable. Must have got that from Momma...

[bigblock73]

Originally Posted by N2TRUX

Jeff your daughter is absolutly adorable. Must have got that from Momma...

Yes, and thank God!

[S10Fan]

Finally got around to installing the ’41 Chevrolet taillights. Also swapped out my passenger door for one that is a “10” and wired up the power windows on both sides.

[68GMC454]

well i sold my car on friday, just another ford, but one of the best cars ive owned as far as not haveing to hardly work on it.. so good in my book.. now to get my drivers license straightened out and hopefuly find a job i may be able to do.. other than that sat on my butt and played games all weekend

[Captkaos]

She is Very Cute, Jeff. They do grow up fast. Elizabeth is almost 18 months now.

Sweet Bubble top pics Scoti. 15mpg is pretty good too!

All I did was clean up the garage on Saturday so I can get back to work on some pending projects. I am redesigning the standard kick panels we sell so they will clear the parking brake without modification.

[boatpuller]

i won my division at a local car show.......chalk one up for the boatpuller.....had alot of people commenting on it.everybody had a story..must of been twelve guy's that had one just like it.i just nod and say "yeah" it's easier than explaining the difference

[85SBC400]

replaced th350 tranny in my 85, swapped out the wore out carter carb with a holley, new plugs and wires, got everything adjusted right carb and timing wise and ready to go and then the water neck housing gasket started leaking and the the oil pan started leaking where the oil pan and timing cover come together.

looks like i'll be working on that through out this week to get those things buttond up.

[87Lowrider]

Installed some Chrome goodies on the lowrider. Still have to install the DD Instrument cluster this week.

Still putting my air mgmt system together to install in the lowrider. Got front bags, brackets and air tank from Suicide Doors which is just right up the road about 30 minutes. Still need valves, air line, compressor, etc... before I can install them.

http://67-72chevytrucks.com/vboard/s...d.php?t=299003


Kenny