Okay - Who’s Your Carb Source? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MacAttack · 07-17-2008, 03:37 PM

Ran across this outfit:

http://www.carburetor.ca/carbs/HTML/sitemap.htm

Chevrolet / Passenger / Chevelle /7080 / 283: $149.00(with exchange/core) Rochester 2-barrel (this is for the engine that’s going in my C10 truck.)

Any ideas?

telly · 07-17-2008, 03:44 PM

I've used them for carb kits but not for an entire carb. The kits were good quality (imo) and the purchase was smooth. Not sure if this helps or not.

MacAttack · 07-17-2008, 04:42 PM

It does. I've got a back-up unit from my Blue Car, but it hasn't run on an engine in two years. Should learn how to do my own rebuilding, but I'm to busy (lazy).

64Magoo · 07-17-2008, 06:14 PM

I have a rochester 2gc I just rebuilt listed in the parts for sale section check it out!

ValveTubeHead · 07-17-2008, 07:34 PM

Quote:

Originally Posted by MacAttack

It does. I've got a back-up unit from my Blue Car, but it hasn't run on an engine in two years. Should learn how to do my own rebuilding, but I'm to busy (lazy).

I bought the kit and did a partial rebuild..not much in there. Fuel bowl was a mud bath, needle valve kept stickin' open and flooding out.

rebuild photo series

before

after

MacAttack · 07-18-2008, 10:38 AM

Great pics, Matt. Thanks!

MacAttack · 07-18-2008, 05:43 PM

Does anyone have any extra throttle linkage pieces for sale? Looking specifically for that six inch long piece that bolts to the top/left (looking forward) of the automatic transmission case, pivoting the pedal movement up and over the intake manifold. This is a stamped sheet metal piece with two holes running through it with a rod attached.

Anthony Fremont · 07-17-2008, 06:26 PM

I just bought a rebuilt 2G from "carblady" on evilbay for $100. I'm real happy, though I had to install a choke plate and it didn't come with a fuel filter preinstalled. The rest was A1 and the engine runs great with it straight out of the box.

kdrodworks316 · 07-18-2008, 11:04 PM

Mac, FYI you need to post in the parts board if you need parts, or you may get a "talking to" from Fred. just trying to save you a bum chewin.

MacAttack · 07-18-2008, 11:18 PM

Quote:

Originally Posted by kdrodworks316

Mac, FYI you need to post in the parts board if you need parts, or you may get a "talking to" from Fred. just trying to save you a bum chewin.

Thanks - will do.

MacAttack · 07-23-2008, 04:16 PM

Technical questions connected with the ‘283’s 2-barrel: What is the actual name of the little spring assembly, under the sheet metal cover, embedded in the intake manifold that operates the automatic choke? Do they make replacements for it - or is it best to convert to a manual choke set-up?

justcuz · 07-25-2008, 05:29 PM

Called a "choke stove" and should be available to purchase.

MacAttack · 07-27-2008, 02:10 AM

Quote:

Originally Posted by justcuz

Called a "choke stove" and should be available to purchase.

Thanks.

07-17-2008, 03:37 PM	#1
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Okay - Who’s Your Carb Source? Ran across this outfit: http://www.carburetor.ca/carbs/HTML/sitemap.htm Chevrolet / Passenger / Chevelle /7080 / 283: *$149.00*(with exchange/core) Rochester 2-barrel (this is for the engine that’s going in my C10 truck.) Any ideas? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-17-2008, 03:44 PM	#2
telly Registered User Join Date: Jun 2008 Location: Stanwood, WA, 98292 Posts: 151	Re: Okay - Who’s Your Carb Source? I've used them for carb kits but not for an entire carb. The kits were good quality (imo) and the purchase was smooth. Not sure if this helps or not. __________________ 1970 C10 Stepside 1980 Camaro Berlinetta 1972 C20 Flatbed

07-17-2008, 04:42 PM	#3
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Okay - Who’s Your Carb Source? It does. I've got a back-up unit from my Blue Car, but it hasn't run on an engine in two years. Should learn how to do my own rebuilding, but I'm to busy (lazy). __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-17-2008, 06:14 PM	#4
64Magoo Registered User Join Date: Jan 2008 Location: Bakersfield CA Posts: 265	Re: Okay - Who’s Your Carb Source? I have a rochester 2gc I just rebuilt listed in the parts for sale section check it out!

07-18-2008, 10:38 AM	#6
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Okay - Who’s Your Carb Source? Great pics, Matt. Thanks! __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-18-2008, 05:43 PM	#7
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Okay - Who’s Your Carb Source? Does anyone have any extra throttle linkage pieces for sale? Looking specifically for that six inch long piece that bolts to the top/left (looking forward) of the automatic transmission case, pivoting the pedal movement up and over the intake manifold. This is a stamped sheet metal piece with two holes running through it with a rod attached. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-17-2008, 06:26 PM	#8
Anthony Fremont Registered User Join Date: May 2008 Location: houston, tx Posts: 549	Re: Okay - Who’s Your Carb Source? I just bought a rebuilt 2G from "carblady" on evilbay for $100. I'm real happy, though I had to install a choke plate and it didn't come with a fuel filter preinstalled. The rest was A1 and the engine runs great with it straight out of the box. __________________ ------------------------------- '66 GMC Custom Fenderside LWB '90 IROC - L98 '97 1200C Sportster

07-18-2008, 11:04 PM	#9
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: Okay - Who’s Your Carb Source? Mac, FYI you need to post in the parts board if you need parts, or you may get a "talking to" from Fred. just trying to save you a bum chewin. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

07-23-2008, 04:16 PM	#11
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Okay - Who’s Your Carb Source? Technical questions connected with the ‘283’s 2-barrel: What is the actual name of the little spring assembly, under the sheet metal cover, embedded in the intake manifold that operates the automatic choke? Do they make replacements for it - or is it best to convert to a manual choke set-up? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-25-2008, 05:29 PM	#12
justcuz Registered User Join Date: May 2008 Location: Alta Loma, Ca. Posts: 930	Re: Okay - Who’s Your Carb Source? Called a "choke stove" and should be available to purchase.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.